Your cart is empty.
Your cart is empty. DALLUX LED Display Parking Sensor
This is Dallux Car Reverse Backup Radar System consists of 4 pcs 4 Ultrasonic sensors. It’s auto detects the distance between the car and back obstruction through the sensors installed at the rear bumper of the car. It helps to avoid the dangerous and costly collisions that occur so easily behind the bumper. No false alarm, waterproof, work good under high temperature and low temperature.
LED display – buzzer place inside the LED display and with the switch ON/OFF control the buzzer, strong anti-interference ability, helping drivers to understand the obstacle distance.
Control Box - good workmanship casing, imported CPU make it more quick response, automatic detection of obstacles when reversing.
Cable connection – Pure copper cable, high quality, easy installation and operation.
Ultrasonic Sensor – Stable quality ultrasonic sensors, good sensitivity.
Package Contents
- 4 x Parking Sensors with 2.5m cable
- 2 x Double Side Sticker
- 1 x Main Control Box
- 1 x LED Display Indicator
- 1 x Hole Saw
- 1 x 1.2 m Power Cable
- 1 x User manual
Jeremy
Reviewed in Canada on January 4, 2025
I installed these sensors in the front bumper of my truck. The price is very reasonable, and they work as described. However, the length of the cable from the sensor to the module is TOO SHORT. I eventually purchased another set of these parking sensors, connecting its cable to another one's as an extension.
Ahmed
Reviewed in Egypt on July 3, 2024
مش نفس المنتج اللى في الصوره بس شغال
ANV Ohio
Reviewed in the United States on June 7, 2024
I installed this on a 2006 Toyota Tundra.The line for the visual display for the dash was too short and would not reach my dash. We tried all sorts of paths and I eventually had to put the display on the floor left of the drivers seat.It has a beeper so at least I heat the beep but I cannot see if the lights are on when in reverse to ensure the unit has power.The install was medium and took 3 hours. The hole saw in the kit is a joke and for plastic bumpers, mine a chrome. Had to use my hole saw kit.I mounted the main module on the drivers side behind the rear light and tied into 12 volt power by tapping the reverse lamp.No problem with the sensors Working well. This is our farm Truck but installed a back up camera and this beeper system.I just wish the cable reached so I could have mounted this on the dash. I will just have to look down on the floor to ensure the power is on when in reverse.If it weren't for the short cable, it would have been 5 starts for $19.Install is not for everyone if you don't know the basics of grounding, 12 volt car power, routing wires and splicing. I suggest also getting good 1 to 2 clampsnor splicers for low voltage lines to ensure tight connections.
John Q.
Reviewed in Canada on December 19, 2024
I used this on my Challenger Hellcat front end spoiler is so low was likely going to hit a curb one day so put this on the front plate holder. Small L shaped brackets made out of some scrap aluminium turn the alert sound off great just inch up to the cub now.
Mark
Reviewed in Egypt on November 30, 2024
المنتج محترم جدا وياتي كما في المواصفات والصور والسعر ايضا مناسب انصح بشراءه وبعد تجربه لمده ثلاث شهور يعمل بكفاءه
Isa
Reviewed in the United States on July 4, 2023
This is my second time buying this sensors. I tried other two ones but no good. This ones are good, Nice and easy to install 👌 and a good price. 👍
Paul
Reviewed in the United States on July 24, 2023
Pretty good as long as the sensors are high enough otherwise they react to the ground
David
Reviewed in Canada on August 1, 2020
Ok, first off I would like to say I was worried about this after reading a lot of the other reviews on it. It seems a lot of people were complaining about length of cables. I own an Envoy XL which is definitely one of the longer vehicles and I had no trouble at all with cable length. I mounted the display on my steering column and ran the cable up the drivers side post by the windshield then through the roof and then back down the drivers side post at the back. The cable still had length if I would have needed to go further. The sensors all reached without effort, the only one that I was doubting was the sensor on the passenger side, it had the longest to go, but it still made it with a foot or so to spare.As far as the quality of the unit it seems pretty solid, I only installed yesterday but sometimes you can tell that something seems like garbage before you even use it and this doesn’t seem like it was made cheap. I LOVE the fact that it has a mute switch as I often pull trailers and I can’t stand listening to the beeping when reversing. Another little feature I like that is not mentioned it that when you first put it in reverse it give a quick audible beep to let you know it’s active. For the money I paid I wasn’t expecting much from this but I was completely wrong and this unit is definitely worth the money 100%!!!
Bobby
Reviewed in the United States on June 29, 2020
I love this product, it works as described and have referred this to many people. I use it daily and has never failed me.A great but and great upgrade to vehicles that don't have sensors.
edgar gadea
Reviewed in the United States on September 26, 2019
I bought this product and I notice that the sensors wires are too shore, it may be good for really small vehicles not for SUB or mid size vehicles, I bought it and now may not able to returned I tried but the link does not work,this product is really easy to install, but any way wont work on mid size or standard vehicles, on mini cooper yes
MichaBee
Reviewed in the United States on June 3, 2019
I installed this system myself. Although I consider myself pretty darn savvy when it comes to techy items such as this. I don’t think that just anyone could install this system without some prior knowledge of installing additional wiring in vehicles.Also if you plan on doing this yourself. Please get a proper soft tool kit. Think amazon has them for $20. Or harbor Freight.Needless to say don’t just wing this install if you’ve never installed electrical items in your car. Do your do diligence and watch a couple vids on installing 4way amplifiers and mid range speakers on amazon if you can’t find a niche video for installing back up sensors.Hope this helps.
Luis Q.
Reviewed in the United States on March 26, 2018
I'll give it 4 stars because at the beginning it got stuck and it was beeping all the time when the reverse was on. After I disconnected the cables and put them back in place it worked fine. I've tested them for over a month and they are working perfectly.
HMH
Reviewed in the United States on September 18, 2017
Nice product. Easy to install. It works very well in keeping you from driving into objects behind your car. I even use one sensor in front of the car to warn me when I get close to the wall in the garage.
Recommended Products
