Your cart is empty.
Your cart is empty. 6000N/1320LB Linear Actuator 20" Stroke DC 12V Electric Motor :
Kindly Tips:
IP44; Indoor Use Only
Specifications:
Material: Aluminum Alloy(24mm)
Input: DC 12V
Stroke Length: 500mm/20"
Min. Retract Length: 675mm(26.6")
Max. Extend Length: 1125mm(44.3")
Max. Pushing Force: 6000N
Max. Pulling Force: 4000N
Travel Speed: 4.5mm/s speed(load)
Limit Switch: Built-in
Protection Class: IP44
Noise Level: 48db
Input: DC12V-2.3A
How To Use:
1. Prepare to connect the two wires of the actuator to a 12 volt battery
2.Blue wire to the positive terminal and grey wire to negative terminal will make the actuator extend. To make it retract, just reverse the terminal connections.
3.To simplify the last step, you can prepare a reverse polarity relay or switch (not included) for the actuator. When you want the actuator to extend and retract, just press the switch
4. Your actuator will hold its position when the power is off. It will automatically stop when reaches the end.
5.The actuator has pre-installed inner limit switch, it cannot be adjustable.
How to protect your actuator:
1. Please use the 12V DC power adapter
2. Please do not exceed the rated load
3. All the actuators have duty cycle, they are unable to work all the time without stop. The duty cycle of this actuator is 20%. it means that your actuator needs 4 minutes to rest for every 1 minute of work. If the actuator keeps working for long time, the motor is easily burnt out.
Widly Use:
Furniture and home application
Hospitals and healthcare
Industrial and construction application
Agricultural machinery
Package Included:
1 X 20" Linear Actuator
2 X Mounting Bracket
1 X Screw Set
raul m.
Reviewed in the United States on January 27, 2022
Used 3 different times, once per month, pushed less than 200 pounds and the last time it stripped the PLASTIC gears. Wished I had known it had plastic gears but you won't find it in their description.
Tri
Reviewed in the United States on July 26, 2021
It works good but it is slow. I think it takes a full minute to extend. You think just a minute but…… a minute goes by slow, like watching the grass grow. So make sure you get the switch that locks onto the up or down position so you can be doing something else while you wait for it to extend.I used 4 of these to make an elevated bed in my camper.
Rog
Reviewed in the United States on July 10, 2021
I was skeptical at first, but after installing and testing them on my dad's door that I welded up for him, they worked effortlessly to open it with a small 12v makita battery. To top it off the makita battery was still full after opening and closing the door. I had to weld in my own brackets because the supplied ones can't even begin to handle the torque.
Customer
Reviewed in the United States on October 15, 2021
This thing can apply over 250 lbs of pull no problem. I have no doubt it can reach the 1000 lbs plus of push force. The brackets they gave are way too weak to be used 90 deg from the push/pull direction though, mine got bent out of whack in no time. I suspect they’d bend even if in line with the push/pull direction if you get close to the max force though, so I’m going to make my own hefty ones. It’s a good problem to have that this thing is too strong though, I love it.
DWS
Reviewed in the United States on August 19, 2020
Made a chicken coop door using this and an arduino. Worked great and has been dependable thus far.
impreprex
Reviewed in the United States on October 10, 2020
This is my second order of Homend linear actuators. The first order I got was of an 18" stroke actuator. It was brand new and works great.For this current order, I chose 3 actuators - each with a 20" stroke. All 3 work fine, but the screws were rusted on one of them and it looks a little banged up (scratches and a piece of plastic was broken off on the bottom).Rusted screws... Come on, guys. It's not only clearly used, but it looks like it's been through a lot. Compared to the other two actuators that do indeed look brand new with screws that aren't... weathered.With that said, it does work and I simply didn't feel like having to pack it back up and ship it back and wait for a replacement. I'll just take my chance here. But I would like the company to know that even though they make great stuff, this just wasn't cool.Plus the shipping box was marginally beat up as well, but I'm blaming that one on UPS - not Homend.
mike wiese
Reviewed in the United States on August 6, 2019
Pretty straight forward one item easy peasy lemonsqueezy
zover
Reviewed in the United States on August 10, 2019
Using this for a chicken coop door opener. It'll crush the chickens! Of course I'm adding safety features to make sure they're safe, don't worry.Well built. Mounting hardware included looks good. Lead wire seems fine, there's about 2ft, decent AWG for the load. Takes 80 seconds to fully extend/retract. Note the duty cycle on this means you can't operate it continuously. It's meant to open/close once in a while, not all the time.
Recommended Products
