Shopping Cart

Your cart is empty.

Your cart is empty.

Deck Grip Non-Slip Sealer Clear Barefoot-Friendly Anti-Slip Coating - Create Traction for Outdoor or Indoor Floors and Pool Decks (Gallon)

Free shipping on orders over $29.99

$155.00

$ 73 .99 $73.99

In Stock

1.MaterialType:Gallon


About this item

  • NON-SLIP COATING: SlipDoctors Deck Grip is a non-yellowing, water-based acrylic sealer & protector, which does not contain silicone, wax or oil. Deck Grip leaves your floor with an enhanced finish that is slip resistant, yet barefoot friendly. The clear, semi-gloss finish is chemical & UV resistant, as well as resistant to de-icing salts & chlorine. Available in Gallon (treats 300-600 feet) or 5-Gallon Pail (treats 1500-3000 feet). Coverage is dependent on surface porosity.
  • SUITABLE SURFACES: Deck Grip is ideal for use on sealed or unsealed concrete, natural & manufactured stone, stained or unstained concrete, stamped or exposed aggregate concrete, brick, slate, sealed or unsealed tile & flagstone. Use Deck Grip on garage floors, driveways & sidewalks, pool decks & patios, entryways, as well as, warehouse & retail floors. Not for use on wood or composite wood surfaces.
  • LONG LASTING: If applied & maintained correctly, your floor will remain slip resistant for 2 years or longer. To maintain the surface after coating it with Deck Grip, routinely sweep and rinse using light pressure. To remove oily deposits or other foreign matters, use a pH-neutral cleaner and scrub lightly with a soft bristle deck brush.
  • SIMPLE & EFFECTIVE: Deck Grip is almost odorless & requires only moderate surface prep prior to treatment. Read & follow instructions carefully. Clean & dry the surface & apply Deck Grip with a 3/8” nap roller (included). Two thin coats are recommended. Some surfaces may require the surface to be lightly sanded to promote adhesion prior to application. Dry time is 6-12 hours for light traffic & 24 hours for normal traffic.
  • APPLICATION: Please start with a clean dry surface prior to application. Allow 24 hours to cure. Apply 2 thin coats for best durability and slip resistance. NOTE: Some textured surfaces require 3 coats for best traction.



Product Description

anti slip coating for tiles and concrete
non slip sealer
non slip sealant for tiles and concrete

Deck Grip: The Ultimate Non-Slip Coating and Sealant

Are you tired of slippery surfaces around your pool or on your patio? Look no further than Deck Grip, the leading non-slip concrete sealer and anti-slip tile coating designed to provide unmatched safety and durability. This revolutionary non-slippery concrete sealer is ideal for a wide variety of surfaces, offering superior protection and a lasting semi-gloss finish.

What is Deck Grip?

Deck Grip is an advanced non-slip cement sealer formulated from a premium water-based acrylic. Unlike other coatings that yellow over time, Deck Grip maintains its clarity and provides a pristine finish that enhances the natural beauty of your surfaces. Its easy-to-apply formula ensures that both DIY enthusiasts and professionals can achieve a high-quality, durable, and aesthetically pleasing non-slip floor coating.

Key Features and Benefits

  • Versatile Application: Deck Grip is perfect for a variety of surfaces including slippery pool decks, sealed and unsealed stamped concrete, and various natural stone surfaces.
  • Durable Protection: This non-slip concrete coating is engineered to withstand the harshest conditions, offering superior resistance to chemicals and UV exposure. This ensures your surfaces remain safe and slip-resistant for years to come.
  • Clear Semi-Gloss Finish: Deck Grip enhances the look of your concrete or stone without altering its appearance. The clear, semi-gloss finish provides a sleek look while delivering the essential anti-slip concrete sealer benefits.
  • Chemical and Chlorine Resistance: Ideal for pool areas and spas, Deck Grip stands up to chlorine and other chemicals, making it the best choice for protecting surfaces in high-moisture environments.
  • Non-Yellowing Formula: Unlike traditional sealers, Deck Grip’s non-yellowing formula keeps your surfaces looking fresh and new, maintaining the aesthetic integrity of your space.

Ideal Use Cases

Deck Grip is incredibly versatile and suitable for a range of applications:

  • Pool Decks: Create a safe, slip-resistant environment around your pool with Deck Grip’s robust non-slip tile coating. Its resistance to chlorine makes it perfect for areas with constant water exposure.
  • Stamped Concrete: Enhance the appearance and safety of your stamped concrete patios or walkways with Deck Grip. It provides excellent adherence and protection, even over existing sealers.
  • Natural Stone Surfaces: Apply Deck Grip to natural stone surfaces that require a non-slip floor coating to ensure safety without compromising the natural beauty of the stone.
non slip floor solutions

LMo1
Reviewed in the United States on April 14, 2025
Luckily tested a small patch on our pool deck first. Purchased because of complaints about slippery concrete. It sealed it well, the water beads on top. But it created an even more slippery surface than the concrete by itself so made our issue worse on the test patch.
Bjorn Berg
Reviewed in the United States on May 9, 2024
Used this product on a stamped patio, and had great results. took a previously slippery finish to one that had more traction to help when the kids tried to run on it.
Christine Creech
Reviewed in the United States on April 28, 2024
Although the outcome I had hoped would come from using the product. The company was very responsive and willing to do whatever was needed to ensure I was happy with my purchase even suggesting to send out a replacement product or another batch of what I purchased.
Nicole Nord
Reviewed in the United States on May 22, 2023
Followed directions to a T. Applied to concrete pool decking. IT DOES NOT WORK AT ALL. Just as slippery as it was before. Complete waste of time and money!
Kelly Wamsley
Reviewed in the United States on June 16, 2021
Does not work! Pool deck is just a slippery after two coats and followed manufacturer's directions perfectly.
Customer
Reviewed in the United States on June 14, 2020
Waste of time and money nothing good about this product very little traction very short term looking for something good for my pool deck travertine is a very slippery Stone was a very bad idea very high maintenance
Jessica L. Kimball
Reviewed in the United States on February 6, 2020
I am disappointed for what I paid for this product. It shipped from Amazon with just a roller, so I called the company and they were very helpful and sent the additive. We cleaned our concrete interior floor and applied a first layer. I spread it fairly thin, but even immediately I could tell it wasn't going to work that well. After the first day you could move your finger over it and it would come off on your hands. I called and asked and they said to apply a second layer, so I did. It lasted maybe a week. After sweeping the floor it has mostly come up as if it's not even there. Big waste of time and $$. Now I'm looking for another product I can add, all this has done is track sand all over my business floor. One star.
Keith J
Reviewed in the United States on June 12, 2019
Adds some traction, but dont expect it to turn stamped concrete into the traction of broom finished. It is better, but still can be slippery when wet.
Recommended Products