Your cart is empty.
Your cart is empty.The Design House 582221 Replacement Square Spindle Passage Latch is for use with Design House handles and locksets. Finished in oil rubbed bronze and designed for left or right hand doors, this bolt latch fits the two most common backsets in the U.S. (2-3/4-inch and 2-3/8-inch). This product is ANSI Grade-3 certified, which means this deadbolt is rated for residential security. The Design House Replacement Passage Latch comes with a 5-year limited mechanical and finish warranty to protect against defects in material and workmanship. Designed and manufactured by Design House, the trusted source for quality lighting, hardware, plumbing, kitchen, and bath products for every taste and budget.
Unknown
Reviewed in the United States on January 14, 2024
Lasted 5 month before an internal what appears to be riveted part separated jamming the mechanism.
MJW
Reviewed in the United States on September 30, 2023
The keyway hole is way too small, so the doorhandles will not fit through. I had to use a hammer to force it in, which damages the door handle. Once, everything is installed, the door handle, will not turn very far down to open the door. Just a poorly made product.
D
Reviewed in the United States on September 25, 2023
Wanted this to replace the latch on a 1950's vintage interior solid-core door and it was oversized 3 different ways, despite other replacement latches fitting as supplied.Problems encountered:#1 - the main shaft would not fit in the existing hole, hung up while inserting and could go no further than part way. WORKAROUND FIX: Had to chisel out and enlarge the hole (hope you have a narrow chisel)#2 - The ribbed collar at the latch end was MUCH bigger than the standard hole, could not force it nor could the hole be enlarged to fit without wrecking the integrity of the door - it would come too close to the edge. WORKAROUND FIX: multiple pliers and twist the collar off, remove and discard it.#3 - bronze square trim plate for the latch side has a 1/8" bend lip - so it will not sit flush with the edge of the door, and would prevent the door from closing, unless your prior latch had the same design. Would have needed to chisel out amore to make it fit. Plus the hole in the plate for the latch to come through is too big now that the collar was removed. WORKAROUND FIX: used a different plate.Why did I use it?Did not find out until too late to return. I actually had a different replacement latch that was working in the door, but I took that for a bedroom door that needed a replacement as well and got this one to do the closet.Was not happy in the install, but made it work. Would not buy it again.
Be Bold
Reviewed in the United States on September 19, 2023
It only opens one way? Moreover, the parts separate as you turn the spindle. It does NOT work as a replacement for a sticky latch. Beware! (Ordering another square spindle latch from a different seller that is not "split" like this one.)
Roz
Reviewed in the United States on March 28, 2023
Good fit
frequent amazon buyer
Reviewed in the United States on December 5, 2021
I liked the price... some amazon prices are getting too high.But this item's price was very good at the time I purchased.
Recommended Products
