Your cart is empty.
Your cart is empty.Model; DHDB - Handle coated with soft EVA - Dual 1/4 PT screw - Alumimun ball head
Tommaso V.
Reviewed in Italy on September 20, 2024
Buona qualità e maneggevolezza. A mio avviso il montaggio della custodia, sempre Divevolk, alla staffa risulta un po’ difficoltoso ma finché non ci si prende dimestichezza
Eddie Tapp
Reviewed in the United States on September 16, 2024
Nice having the dual handle especially for lighting… connecting it to the Divevolk is not easy… once you get the housing on it works fine but to be truthful… I think they went on the cheep side with the screws and connections… It would be nice to break it down for shipping, but it’s too difficult to reassemble and I usually don’t travel with all my tools to trouble shoot… I recommend you have an extra person when mounting… that would make it easier..
Red Brantley
Reviewed in the United States on July 18, 2024
I just traveled to the BVI and it was perfect for small and compact underwater photography options! This coupled with a Divevolk underwater camera/phone case, divelight attachment and wide angle lense attachments was exactly what I needed for a one week sailing excursion!
ow-01
Reviewed in Japan on September 4, 2023
あまり大きくないミラーレズや、ビデオカメラスマホでの撮影にむているデュアルハンドルトレイです。両端に機材を取り付けやすいのでライトとマイクをつけてしっかり両手でグリップできます。カメラの性能にもよりますが、移動撮影でも安定するのでカメラ本体を持って撮影より手振れ補正によるエラー（画面歪み）も少ないです。
Joerg Hermes
Reviewed in Germany on August 13, 2023
Die Schiene und Griffe sind gut verarbeitet und eine gute Ergänzung zum Divevolk-Gehäuse. Sie sorgt jedoch für sehr viel Abtrieb. Divevolk Seatouch 4 Max inkl. iPhone 14 Pro, zwei Dreifachklemmen und zwei 9 Inch Arme erzeugten bei mir 1100 g Abtrieb, wobei das Gesamtsetup trocken 2140g wog. Ich löse es nun so, dass ich über dem Gehäuse ein 10 inch Carbon-Auftriebskörper verbaue (gibts bei ebay für 35 Euro aus China) und links und rechts je einen 9 Inch Arm mit FAXM/FAXS-Auftriebskörpern (gibts alles bei Amazon). Somit kann ich flexibel genügend Auftrieb erzeugen, um an jedem Arm noch eine Videolampe zu verbauen.Noch ein Tipp: Andere Hersteller vertreiben dieselbe Schiene auf Amazon auch für 80 Euro.
Bob K
Reviewed in the United States on May 11, 2023
There are a few similar Dual Handle trays available on Amazon. This one is very nice. The ball mounts are very sturdy. They stay in place and hold the lights well (with the right ball mount clamps). The edges are all smooth.There isn't anything to suggest that the hardware is stainless, or aluminum, or that the handle can be used in fresh or salt water.The summary indicates that it's for use with the Seatouch housing. With a 1/4-20 adaptor, it can be used with any GoPro mounting camera. I don't see anything that makes this special for the Seatouch housing.It comes with 2 1/4-20 thumb screws for mounting cameras. I'm not sure why one would need 2. I don't think the screws can be separated enough to use this as a 3D camera mount.This handle tray seems to be on the expensive side. I've seen other handle trays that appear to be identical that cost quite a bit less. The price is my only issue and why I didn't give it 5-stars.It has two holes that can be used with lanyards. This handle tray feels fairly heavy so I expect it will quickly drop to the bottom of the ocean if it slips out of your hands. So... use a lanyard. One is not included.
NorthStar
Reviewed in the United Kingdom on November 21, 2023
I bought this and the Seatouch 4 Max case.It doesn’t fit directly onto the housing but needs the expansion clamp to be attached first. It’s Getting too expensive so needs to be returned. I never saw an explanation in the description that this was necessary. Disappointed as it more than doubles the price of the original housing to purchase the expansion clamp and handle.
Brandon
Reviewed in the United States on October 16, 2023
This dual handle tray allows a Seatouch housed Iphone to be a real underwater camera system instead of a point and shoot. The dual 1/4 screws in slots at the base allow the Seatouch to be pivoted about 30 degrees and then the Iphone removed from the housing. You do not need to fully remove the housing (and filters/accessory lenses) to get the phone out.Construction appears to be stainless and aluminum and has survived a dozen dives in both fresh and salt water with no corrosion appearing.The handles are big enough to grip with 5mm gloves but are not so chunky as to be uncomfortable for smaller hands like my dive buddy daughter has. The twin ball mounts at the top allow for effective mounting of industry standard lights, floats and auxiliary cameras. The adjustability of the tray means it can be telescoped in or out to acommodate housed DSLRs or smaller GoPro type action cameras.This is relatively expensive but it's a get-what-you-pay-for item that works seamlessly with the Divevolk ecosystem with no kludgy adapters.
Isa
Reviewed in the United States on January 6, 2023
The media could not be loaded.
Customer
Reviewed in the United States on January 13, 2023
I’m a professional UW photographer and travel with a lot of gear (in heavy pelican cases!) and travelling light while protecting expensive camera systems is a continual challenge. Using the DiveVolk Seatouch Max 4 to save my back from hauling hauling heavy gear around when I want to travel with a minumum of gear when “on vacation”. This “little guy” can perform adequately for my “light” needs.However, ss light and compact as it is, there are times when I want to add additional light or cameras accessories (GoPro or some other action cam?) onto the system to improve or enhance my Smartphone photos. I asked DiveVolk about this and they advised that on the lens attachent accessorie, there are ¼-20 holes to mount such equipment. The also advised that they had both a single and double handle for doing just that available and would I like to try it? I jumped at the chance … they sent me a dual handle to try out.My first impression is that it was well built – nice anodized aluminum. The system was easy to assemble with a couple of provided allen keys. Assembly allows the handle to be adjusted from 11 inches to 13.2 inches. The design of the attachent screws is such that it could be altered to fit other camera housings. The bonus here is that is also DID fit one of my main compact mirrorless systems. This insured for future use on other camera systems. I could also remove one of the handles if I wanted to use it as a single handle system. The system felt solid.Once assembled – in my case adding one of the video lights - the system was positively bouyant as expected but easy to use. I could negate this by adding on some floatation. Having a standard sized ball mount means that nearly any floatation arms and accessories from any manufacturer could be mounted to the system. DiveVolk also has floatation cyclinders in their accessories line and I am sure things can be balanced out easily.Overall, I am pleased with the system. The Dual handle definitely increased the stability for both photo and video. Because of its design, a big plus for me was that it would fit other housings also if I so chose. Check your dimensions if you are considering other systems as well for a fit.For the flagship DiveVolk Seatouch 4, it is a nice little rig that gets better each time they add something to it. It may fit your needs – it did mine! Now I can hang almost anything off it!!!
F. Schopf
Reviewed in Germany on April 21, 2023
Mit dem Griff ist der Touch (Auslöser) nicht mehr mit dem Daumen zu erreichen. Das macht die Bedienung mit einer Hand fast unmöglich.Habe dann stattdessen den Arm für das Unterwasserlicht oben an die Erweiterungsklemme geschraubt.
Recommended Products
