Your cart is empty.
Your cart is empty.Mini needle valve. T design handle style. A viton o-ring seal and a teflon back-up ring below the threads protects the mini valve from corrosion and galling. The stem threads are rolled for strength and ease of operation. The metal-to-metal hard seat design is 100 percent helium leak tested to 1 x 10-4 ml/s at 200 psi on each mini valve. Orifice size: 0.187", flow coefficient: 0.44. Size: 1/2" - 14 NPT female x 1/2" - 14 NPT female.
John Trahan
Reviewed in the United States on April 20, 2018
Quality of unit, fast delivery, Excellent control of propane flow. I used this to replace the propane regulator for an outdoor gas burner. I'll never buy another regulator again. If you have problems with the inexpensive gas regulators, this is an unauthorized replacement
BobV
Reviewed in the United States on August 11, 2016
Very impressed with the apparent quality of this valve. It serves as a reject valve on my reverse osmosis system, and I have had to replace the OEM brass valve several times due to wear/corrosion, and they did not easily achieve a total cutoff. This Dixon valve smoothly will give 100% cutoff (although I do not typically need to do that). The t-type handle is much easier to adjust than the circular one that was on the brass valves. This review is based on first impressions only--I have not had this installed anywhere near long enough to be able to comment on its longevity or its general performance as it ages. But the difference in initial quality and smoothness of operation vs the brass valves was very apparent immediately upon installation.
M. S.
Reviewed in the United States on May 14, 2016
Just so great
Recommended Products
