Your cart is empty.
Your cart is empty.This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Ford Bronco: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996] - [Ford Country Squire: 1987, 1988, 1989, 1990, 1991] - [Ford E-150 Econoline Club Wagon: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996] - [Ford E-150 Econoline: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996] - [Ford E-250 Econoline: 1986, 1987, 1988, 1989, 1990, 1991] - [Ford F-150: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996] - [Ford F150: 1986, 1987, 1988, 1989, 1990] - [Ford F-250: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996] - [Ford LTD Crown Victoria: 1987, 1988, 1989, 1990, 1991] - [Ford LTD: 1986] - [Lincoln Continental: 1986, 1987] - [Lincoln Town Car: 1986, 1987, 1988, 1989, 1990] - [Mercury Colony Park: 1987, 1988, 1989, 1990, 1991] - [Mercury Cougar: 1986, 1987, 1988] - [Mercury Grand Marquis: 1986, 1987, 1988, 1989, 1990, 1991]
Ed Palmer
Reviewed in the United States on January 28, 2025
Used this for my 1974 Bronco project with a 351w install. The motor came from a early 80's 351w 2 barrel. The passenger side is not the easiest to find as it differs from the original but fils perfect. I did do some grinding in the inner ports and some manufacture defects on the outside but only to smooth it out. You will need to purchase bolts for your application. Recommended
David W.
Reviewed in the United States on September 24, 2024
Manifold will not clear the shock tower without so much grinding it would likely leave a hole in the manifold. It also dumped right at the starter, which means cannot connect exhaust pipe.Also, had to chisel a lot of casting flash out of several ports. Charging too much for these for me to have to finish the product for them.
Amrik
Reviewed in the United States on April 13, 2022
Fits perfect ford f150 1992 efi 5.0
Russell Labs
Reviewed in the United States on July 11, 2021
I have no complaints about the product itself, I got what I paid for and the product looks great. I will state that I am no professional car surgeon. However, I read in the description that this product comes with all the hardware needed for a complete repair. That was not completely true. However, it DID come with all the pieces in the picture. So, I don't want this to be a complaint as much as wishful suggestion. Maybe include a link to the hardware for the block-side of this repair?
In_the_Sticks
Reviewed in the United States on May 12, 2021
Fits exactly. There is more room around the spark plugs than the original manifold, perhaps causing less heat wear to the wiring and spark plug boots. The rough sand casting is rough but there is more than enough material to polish it out if one wishes to do so.
Ela Graff
Reviewed in the United States on March 17, 2020
Was skeptical, but fitment, and machine finish seems good. Dorman products are typically good. The part number that was stamped on the gasket was a fel-pro part number.
allan c robertson
Reviewed in Canada on September 22, 2019
They are exactly as described
JDWizkid
Reviewed in the United States on December 7, 2018
Arrived on time as described. Installed with ease in my 1992 F150. Very quiet. Good price.
gsx-r
Reviewed in the United States on November 10, 2010
Bought both sides for an 86 f150 302 v8 that I use for a plow truck, once you get all the studs and bolts out of the old one, this fits like a dream. OE fit and function, works great. Recommended.
Recommended Products
$36.99
$ 16 .99 $16.99