Your cart is empty.
Your cart is empty.Dorman's Power Window Motor Gear Plug is manufactured for cost-saving convenience. Save time, money and labor by replacing only the plug-instead of the entire gear assembly. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Ford Bronco: 1992, 1993, 1994, 1995, 1996] - [Ford Country Squire: 1989, 1990, 1991] - [Ford Crown Victoria: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011] - [Ford F Super Duty: 1993, 1994, 1995] - [Ford F-150: 1992, 1993, 1994, 1995] - [Ford F-250: 1992, 1993, 1994, 1995] - [Ford F-350: 1992, 1993, 1994, 1995] - [Ford LTD Crown Victoria: 1989, 1990, 1991] - [Ford Thunderbird: 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997] - [Lincoln Mark VIII: 1993, 1994, 1995, 1996] - [Lincoln Town Car: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011] - [Mazda Navajo: 1991, 1992, 1993, 1994] - [Mercury Colony Park: 1989, 1990, 1991] - [Mercury Grand Marquis: 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006] - [Mercury Marauder: 2003, 2004]
lucas hill
Reviewed in the United States on January 10, 2025
Worked to fix my fords windows I did have to grind them down a bit to fit tho
Terry L Adair
Reviewed in the United States on July 3, 2023
this worked very well on my 95 ford pickup door. It was a very tight fit butonce they are in, they work very well. A good bargain compared to replacingthe window motor.
Customer
Reviewed in the United States on December 24, 2023
Fit and worked just as should. Repaired window motor saving me $$.
john curcio
Reviewed in Canada on September 29, 2022
I used to fix my power window.
Oswaldo
Reviewed in Mexico on December 2, 2022
Buen producto para repara el motor de ventana de Ford Explorer 95
NFD
Reviewed in Canada on October 8, 2022
I hate trowing out perfectly good power window motors just because these failed. Did what they were intended to do.
The Box Man
Reviewed in the United States on March 22, 2021
Used to repair a slipping window on my 93 F150. Motor was working fine but glass would slide downward and had to use my hand to assist back up. Opened up the old motor and found that the original plugs had disintegrated. Cleaned it all out and put in new grease. Used a very small amount of pressure on a bench vise to get the cover to set the plugs- have seen people complain these don't fit but they do.
Douglas Lynch
Reviewed in the United States on September 16, 2020
These bushings seem to fit and function as the origials. I say "seem" because the 25 year old factory pieces were literally in pieces... They are very snug when installing. I would recommend looking the install procedures up online. They were very simple after seeing it done (I couldnt find a good video on YouTube). The windows on my 95 Mercury Cougar glide up/down smooth and nearly silent...
Hammer man
Reviewed in Canada on March 8, 2020
Not exact fit but filed down and works perfect now. Overpriced for pieces of nylon in a package but windows work now with a little help from YouTube
Pletzvet
Reviewed in Canada on December 6, 2020
As described
fmwardalot
Reviewed in the United States on October 25, 2017
These are just right.Being frugal (cheap!), I opted to make these from: cut pieces of V belt, cut pieces of hot glue stick, cut pieces of some black rubber rod...each and every time, the home made fix would last a few months on the drivers side window, and I'd be taking the door apart again, saying nasty things about these pesky dampers. There are folks who use ball bearing in place of these, but I never tried that. I suspect the gear might crack.So after being frugal, I bought these. They are snug, really snug fitting, and had to tap them into place with a nylon hammer. BUT the result was night and day compared to the cut v belts. These plugs were harder than anything I tried, so the window is more responsive. The little bits of cut crud don't drag on the gear, so the window seems faster too. Overall, good idea to use these rather than the home made fix.
Stan
Reviewed in the United States on September 7, 2016
Let me try to explain this so it is understood. First, these "plugs" are nylon and are VERY tight fitting. I've just done two motors. The first one was a real trial. The second, piece of pie. Getting the motors out of a 1994 Ford Bronco was a breeze. I used three strips of duct tape on the windows to keep them from falling. From inside of the window, up and over the door frame, then down the outside of the window. (Or outside to inside, your choice.) Be sure to clean the inside of the motor of broken plastic pieces. I had one nearly invisible piece stopping me from replacing the c-clip. Be sure to have a pair of c-clip pliers handy. Otherwise you'll have a fun time removing and reinstalling the c-clip.Now...for the plugs. Lightly grease the plugs and stick them to the metal part with the small gear. Be sure to slide them all the way up. I tried to put the plugs in the plastic gear first and that did not work. They just kept flopping over. Then gently put the metal part, with the plugs stuck to it, on the plastic gear. The plugs will tip a little towards the middle, but that's ok. Then I tapped the gear down with a hammer. Once it got about half way, it slides down with no problem.This review got a little long winded, but I hope this helps someone install these plugs.
DW
Reviewed in the United States on October 8, 2013
These plugs worked perfectly to restore a Ford Window Motor.When my motor had started running my driver window very slowly, almost not at all, I pulled it out and removed the gear plate. I found a bunch of grease and threading, as if the original plugs had been disintegrating and just had totally given up. I cleaned up the insides and the motor still seemed to turn just fine, but of course with nothing holding the metal regulator gear firmly in place, as soon as the load of the window regulator was applied, the motor would turn, but the window would not move. I ordered these to give them a shot rather than buying a new motor, and voila, the window works perfectly. Actually, to my surprise, my driver window is now the fastest of all four.The plugs are not hard to install. Once the motor is out of the door, there is one torx or philips screw to remove a plate over the gears. It should be pretty obvious how to fit the plugs in, and they should fit snug. First however, clean out the junk inside and then add a bit of grease. Also, while the door panel is off, spray good amounts of silicone grease down the window tracks, both inside the door, and the upper portion. This doesn't take much time. I did however, have to unscrew my speaker to get at one part of the window track.Note: my motor turned the gears smoothly and evenly, if yours does not, you may need Dorman 74409 (or similar, there are multiple model numbers) which includes the larger plastic circular gear with the plugs, for roughly twice the cost.
Recommended Products
