Your cart is empty.
Your cart is empty.Dorman's Diesel ICP Sensor Harness is constructed from durable plastic to prevent oil from soaking into the sensor, protecting it from damage. The sensor can thereby operate effectively to measure the pressure in the injection system. Safeguarded by the harness against oil intrusion, the life of the sensor is prolonged.
Olieman
Reviewed in the United States on April 26, 2025
Excellent product. I especially like the color coded wires to keep the guess work out of your repair job. A little more expensive than other brands but the Dorman name does carry some weight.
Ryan
Reviewed in the United States on July 1, 2021
This is a must when swapping out to. A new icp sensor..fit perfect and did what I needed.
Craig O'Shea
Reviewed in the United States on July 22, 2018
Good quality product, fixed my problems.
Carl Eddy
Reviewed in the United States on February 10, 2015
Used this when replacing the ICP sensor on my 6.0. The connector and wiring is good quality and fits the OEM sensor perfectly. I soldered and shrinkwrapped the new pigtail to the wire harness instead of using the included crimp connectors.
Wilsond0889
Reviewed in the United States on November 27, 2015
Not color coded. Does not work
C. R. Connor
Reviewed in the United States on March 11, 2014
This worked great. The only complaint is the crimp connectors didn't hold well, so I threw them out and soldered the joint. The reality is that this is located in a very hot area under the turbo and near the down tube that soldered joints are very advisable.
Tim Sharp
Reviewed in the United States on February 9, 2014
This is great product to replace the OEM connector which becomes oil-saturated when the ICP sensor fails. Everything is included and the the pigtail is long enough to make replacement easier. The Dorman unit appears to be a better design than the OEM and has a better seal and tighter fit. I don't know how long my ICP was on the blink, but once I replaced the sensor and pigtail, long lost performance was immediately restored. I found it useful to use forceps to hold the wire lead on the wiring harness while crimping the connector. Additionally, the use a "nose-type" crimping tool will aid in connecting the wires.
Cosmicpapa
Reviewed in the United States on January 5, 2014
Upgraded my ICP on my 7.3 Powerstroke due to a leaking sensor, this was a suggested replacement when changing the sensor. This is a excellent cost effective replacement to OEM. Highly recommended...
Recommended Products
$20.00
$ 8 .99 $8.99
$47.74
$ 21 .99 $21.99