Shopping Cart

Your cart is empty.

Your cart is empty.

Dorman 926-446 Front Driver Side B Pillar Molding for Select Chrysler/Dodge Models, Black

Free shipping on orders over $29.99

$33.40

$ 16 .99 $16.99

In Stock

About this item

  • Direct replacement - this window pillar was designed to match the fit and finish of the stock pillar trim to restore the appearance of your vehicle's exterior
  • Ready to install - easy to securely install, matching the factory fastening design for a simple replacement
  • Excellent value - cost-effective and time-saving solution compared to going back to dealership or salvage yard
  • Trustworthy quality - backed by team of engineers and product experts in the United States
  • Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an “i” in a blue circle, additional verification is needed. Please hover over the "i" to verify fitment notes match your vehicle


Warped, cracked and missing pillar trims can take away from your vehicle's appearance. This replacement door applique matches the fit and finish of the factory trim and is typically a snap to install. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Chrysler Town & Country: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016] - [Dodge Grand Caravan: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020].


Tansis
Reviewed in the United States on January 23, 2025
This molding would have fit my 2014 Town and Country. It was the right fit and it looked good. I had no choice but to try and install it on a cold day. Car door was cleaned and wiped down with alcohol. The foam surrounding the tabs on the molding was installed too close. I had an extremely hard time trying to slide down the molding into both slotted holes. I believed I finally managed to slide both tabs into the holes. I secured it with the bottom screw. The next day the molding blew off on the highway. Not going to buy this one again. Maybe on a warm day the molding would have adhered better to the car.
Customer
Reviewed in the United States on July 13, 2024
This is the second I ordered for my 2014 Dodge Caravan (one for each side), and it fits exactly as it should. They each fell off about 6 months apart from each other. The black color is slightly off than the rest of the trim, it's more likely cuz this is new and the rest of the trim isn't. If you are missing this piece on your vehicle, I highly suggest these
Customer
Reviewed in the United States on June 23, 2024
I did add 3M 560 adhesive sealant onto the door, then removed blue strips and installed. I’m hoping with the adhesive, it will not rip off the van anymore. This is the 4th time I’ve had to replace this B pillar strips on my van. Install was hard, but with enough pull down force, it finally went into place. Once weathered, it’ll look just like the other ones.
Aaron Wright
Reviewed in the United States on January 15, 2023
This trim piece looks perfect. I would definitely buy it again.Now, it is super hard to install. This is because of some weather stripping around the tabs that are supposed to slot into the door frame. I tried everything I could to compress the weather stripping enough to allow the installation, but it proved impossible to compress the weather stripping enough and allow for the downward movement required to engage the tabs.To overcome this, remove the weather stripping squares from around the tabs. It comes off super easy. After that, it was a two-minute repair. I understand what the weather stripping is for, but I struggled with it for 30 minutes trying all kinds of methods (e.g., brute force, compression clamps and hammer and block, brute force again, etc.).
Momof4kids
Reviewed in Canada on June 7, 2022
Fits my Dodge Caravan perfectly. Watched a youtube video on how to install it. It was easy and looks original. Shipped within a couple of days.
skyler smith
Reviewed in the United States on July 26, 2021
Someone ripped the old one off my wife's car in a parking lot so I had to replace. This one fit perfectly. Got here in a day and install was 30 seconds. Cheapest I could find 10 out of 10
G. Clark
Reviewed in the United States on October 12, 2021
Read Dean G's review for a really good tip: "Don't press in at the bottom till the screw peg lines up with the hole. Most important part of the whole operation is to leave the adhesive covering ON and sticking out the side and top of the applique. Mine was a blue plastic. Slowly peel it off once everything is in place."2 people would help with an install, but I had no trouble installing it myself. The piece fit very well and matches closely enough (dirt / wear will make other existing trim look a tad bit different in color in certain lighting conditions).
otto vander vegte
Reviewed in Canada on January 22, 2021
good fit but was very difficult to get it to slide into place when the tape protection was removed
Nick
Reviewed in Canada on August 27, 2020
Exact fit for my 2015 Dodge Grand Caravan. Very well made. Take your time during the installation, it is a tight fit and you don’t want to break the clips that holds the trim in place.
Dan H
Reviewed in Canada on July 23, 2020
Came quickly and fit perfectly, although a bit tricky to install.
Jennifer Lala
Reviewed in Canada on November 3, 2020
Great fit and finish. Easy to install if you know what you're doing.
Bill W
Reviewed in the United States on August 26, 2019
I bought this part to replace one that came loose while driving down the expressway and eventually flew off. If I would have known that the dealer was going to charge $93 to replace it, I would have pulled over and tried to retrieve it. After finding out the dealer's price, I decided to find the part on my own. Luckily I found this one on Amazon for less than half the price. This part is for the driver's side front door. There is one screw on the inside of the door that the part attaches to. It also attaches with 2 strips of adhesive.To install the piece, here is what you should do. DO NOT REMOVE THE ADHESIVE COVERS YET! I figured out this is the best way to do it. I did it differently and exposed the adhesive first and this made it very difficult. I ended up reapplying the adhesive cover strips to do it right. First, there are 2 square padding stickers around 2 brackets that will need to slide into place on the vehicle. I found that removing these padded stickers was the easiest way to get the brackets to fit into the "holes" (not sure how to describe this part) on the car. You'll have to carefully bend the panel to side both of the brackets into their places. Then make sure the screw hole lines up with the screw peg on the panel and screw in the screw (it's a star head, not philips). Once you get the panel into place, you can pull the adhesive cover strips off. There is extra length of cover strip that should stick out of the top that you can pull. Now push on the panel for a bit to get the adhesive to stick.
Dean G.
Reviewed in the United States on April 11, 2019
I wrote this as an answer to the question if the screw was included, but feel it should be posted here also:No screw, no instructions. Pretty self-explanatory just looking at it, though. You'll need a second person to push in and push down, top and center. You can look through the side to see how much further you need to go by looking at the peg for the screw hole. Don't press in at the bottom till the screw peg lines up with the hole. Most important part of the whole operation is to leave the adhesive covering ON and sticking out the side and top of the applique. Mine was a blue plastic. Slowly peel it off once everything is in place.
Recommended Products