Your cart is empty.
Your cart is empty.Add to your existing line cleaning kit to clean without disconnecting faucets. Also works great to clean party pumps. One end of this kit connects to keg coupler (sankey) and other end connects to almost any existing beer line cleaning kit. Just disconnect sankey from keg and connect it to this attachment. Then pump cleaning liquid from sankey, through beer line, to faucet. Rinse in the same manner and you're done. No need to disconnect and connect faucets each time you clean. Clean party pumps and Uber Tap in the same way. High quality metal parts.
Lisa Fratangelo
Reviewed in the United States on April 13, 2025
Awesome tool for flushing home draft systems. I have a converted fridge/kegerator and a jockey box. I did switch out the connector to accommodate a garden hose, works great!
Ted
Reviewed in the United States on November 16, 2023
I don't think I'm using it exactly as intended, but the most valuable part here is the stainless fitting that attaches to the Sanke coupler -- attach whatever you want to the other end depending on your setup.I attached it to a corny keg fitting and am able to easily clean my taplines by filling a corny keg with cleaning solution and pushing it through the lines by attaching my keg couplers to it.
devonvince
Reviewed in the United States on April 30, 2023
Why do you say in the description it will fit with the kegco line cleaning pump. You send it with an attachment that fits the faucet not the pump. Its doesn't attach to the pump kit like described.
Tom G
Reviewed in the United States on August 17, 2021
I hoped this was what I needed, but with 4 taps its not so slick. I'll switch to a different cleaning system.
Nick
Reviewed in the United States on July 15, 2021
Overall worked well....once I figured out how to get it connected.Like another person mentioned, it fits some keg cleaning kits. I have a kegco and the fittings didn't match. What worked for me is taking the Sankey connection off and connecting it to kegco line directly as pictured. The tube and small end piece were not needed.Once I figured that out, worked perfectly. Easy to connect and disconnect making the cleaning process easier.
Jeffrey Miovech
Reviewed in the United States on August 12, 2019
Clean beer lines are important to ensure good beer tastes good.I coupled the Draft Warehouse Easy Beer Line Cleaning Attachment with the KegWorks Deluxe Beer Line Cleaning Kit - w/ 32 Ounce Liquid (https://www.amazon.com/KegWorks-Deluxe-Beer-Line-Cleaning/dp/B0002EAJZK)This attachment allows you to clean your tap, lines, and faucet all while keeping your faucet attached to the tower!All you have to do is connect the end of KegWorks kit to the Draft Warehouse Attachment then the Draft Warehouse Attachment to your tap. Engage the tap, pump the KegWorks pump bottle (filled with cleaning solution, of course) and open the faucet to let the cleaner flow through your keg system into a suitable vessel. Close the faucet when half of the bottle is empty and let it sit for a bit to allow it to deep clean the system. Once you're done, flush with the remaining cleaner then fill the bottle up with water and flush the system until the cleaner is gone. Easy-peezy and no mess!
S H PRICE
Reviewed in the United States on May 4, 2019
I had the deluxe KegCo cleaning kit where you detach the beer line from the coupler and then attach the cleaning kit to the beer line so you can clean the line and faucet at the same time. It’s always a pain to clean the coupler, although other than that it does a decent job.The”Easy Beer Line Cleaner” advertises that it attaches to ‘most’ line cleaner kits. However it does not fit the coupler end cleaning kits, only faucet end kits. Despite this it was a simple matter to run my KegCo fitting under hot water and remove the line from the pump to the fitting, and then remove the Sankey end of the Easy Beer Line Cleaner. The I/D isn’t identical, but with a couple of small zipties the cleaning line attached directly to the sankey end, and it works like a charm. So much easier and faster to clean coupler, line, and faucet all at the same time. Now it’s no big deal to clean every keg, whereas before I’d get lazy and maybe do it every other keg, or every third if I was drinking them quickly!So in short, doesn’t fit my cleaning kit, but was able to make it work - and when it works it’s brilliant.
Customer
Reviewed in the United States on February 18, 2018
Made attaching to the keg and the cleaning process very easy. Connections to your pump may not line up as easily, had to do some configuring'
Recommended Products
