Your cart is empty.
Your cart is empty.The Planted seat bracket is made with 3/16 inch thick steel for superior strength. It is built to accept sliders from most major seat manufacturers like Bride, Cipher Auto, Cobra, Corbeau, Momo, OMP, Racetech, Recaro, Sparco, Status and more. Extra material is provided for direct seat or side mount applications where eliminating sliders is preferred. They are finished with a black powder coat and applications are available for most cars.
Patrick
Reviewed in the United States on April 9, 2025
2005 Mini Cooper SInstall was easy enough but passenger side seat belt bracket is to close to the tunnel for easy use with factory seat belt latch. Will need ALL new hardware for install of seats to vehicle and New Bolts & Nuts for Seatbelt Latch. Great build quality though.
That guy
Reviewed in the United States on January 15, 2023
2005 r53Seat installing: Recaro sportster csSlider: Recaro universal slidersYou will need a 1/4 inch spacer betwen seat and slider.Floor Bracket i am using:Unfortunately i got this bracket.Do you want to use oem bolts to the floor?No you can not.Do you want to use oem 3 point sear belt?No you can not.Bolts: oem bolt is too long to fit through the opening in the bracket.you will need to either cover to stud and nut or try to Drill a hole on top to insert the orm bolt through but still it will never be straight through due to avail space and you will end up rounding up your oem bolt.Seat belt, locking device: you cant use oem bolt as its too short but you can go buy longer bolt at hardware store. But the issue is, seat belt bracket is already sitting very tight with the Recaro seat and the Mini’s middle cosole, so putting bolt and a nut will get in the way of you installing floor bolts as your Recaro wont slide past the nut. You can not have any bolt tread or let along a nut sticking out or else It will block the seat from sliding.Avoid this bracket for your mini unless you want to heavily modify this bracket after spending this much money, just Find alternative or go to your local machine shop and have them make custom bracket for far less of money and less headache.
R. L. Johnstun
Reviewed in the United States on February 11, 2016
Installed in a 2006 Mini Cooper S with Sparco R100 Seats and Sparco RailsThe bracket worked great. It's very solidly built and does the job. If you're installing this, be prepared as it's a very tight fit. The tab for the seat belts takes some work to get everything to fit just right. I ended up notching my carpet to leave room for the nut holding on the factory seat belt to the bracket. If you're running harnesses, this won't be an issue for you. Read my review on the passenger side bracket for some of the issues I had with that bracket.My only complaint is the price for what it is, but if you're going aftermarket seats your options are to buy this or make your own.
Recommended Products
