Your cart is empty.

DW-6093 3 Phase Power Analyzer DW6093 Three Phase Power Meter Tester Real Time Data Recorder Logger with 3 PCS CP-1201 Current Probes 20A 200A 1200A | 1P/2W, 1P/3W, 3P/3W, 3P/4W

5.0 Write Review

Free shipping on orders over $29.99

$1,999.00

$ 99 .00 $99.00

In Stock

Qty.:

Voltage measurement range : 10 to 600 ACV
Current probe input signal volage ( ACV ) : 200 mV/300 mV/500 mV/1 V/2 V/3 V. Current probe input current range ( ACA ) : 20 A/200 A/1200 A (Standard CP-1201 Current Probe)
Meter can cooperate the universal current probe.

Analysis for 3 phase multi-power system, 1P/2W, 1P/3W, 3P/3W, 3P/4W
Voltage & Current are the True RMS value.
True Power ( KW、MW、GW ) measurement.
Apparent Power ( KVA、MVA、GVA ) measurement.
Reactive Power ( KVAR MVAR、GVAR) measurement.
Watt-Hour ( WH、SH、QH、PFH ). | Power Factor( PF )、Phase Angle( Φ ).
Voltage measurement range : 10 to 600 ACV
Current probe input signal volage ( ACV ) : 200 mV/300 mV/500 mV/1 V/2 V/3 V. Current probe input current range ( ACA ) : 20 A/200 A/1200 A (Standard CP-1201 Current Probe).
Meter can cooperate the universal current probe.
Programmable CT ratio (1 to 600) and PT ratio (1 to 1000).
ACV input impedance is 10 Mega ohms..
Safety Standard : IEC 1010, CAT III 600V
Built-in clock and Calendar, real time data record with SD memory card , sampling time set from 2 to 7200 seconds. Just slot in the SD card into the computer, it can down load the all the measured value with the time information ( year/month/data/ hour/minute/second ) to the Excel directly, then user can make the further data analysis by themselves.
Complete set with 4 PCs Test Leads, 4 PCs Alligator clips, 3 PCs Clamp Probe ( CP-1201 ), AC to DC 9V adapter, 2 G SD memory card and Carrying bag.
Computer data output, can cooperate with USB Cable /USB-01 RS232 cable/UPCB-02 and Data Acquisition software, SW-U811-WIN. (These accessories are optional, NOT INCLUDED in the standard package.)

Circuit	Custom one-chip of microprocessor LSI circuit
Display	* LCD Size : 81.4 X 61 mm ( 3.2 X 2.4 inch ) \| * Dot Matrix LCD (320 X 240 pixels ) with back light.
Measurement	* ACV \| * ACA \| * AC WATT (True Power), AC WATT (Apparent Power), AC WATT (Reactive Power) \| * Power Factor \| * Phase Angle \| * Frequency
Wire connections	1P/2W, 1P/3W, 3P/3W, 3P/4W.
Voltage ranges	10 ACV to 600 ACV, auto range.
Currentprobeinputsignal&range	* Current probe input signal volage ( ACV ) : 200mV/300mV/500mV/1V/2V/3V. \| * Current probe input current range ( ACA ) : 20 A/200A/1200 A (Standard CP-1201 Current Probe) \| * Meter can cooperate the universal current probe.
Safety standard	IEC1010 CAT III 600 V.
ACV input impedance	10 Mega ohms.

Range select	ACV: Auto range. \| ACA: Manual range.
Clamp frequency response	40 Hz to 1 KHz.
Spec. tested frequency	45 to 65 Hz.
Over load protection	ACV: 720 ACV rms \| ACA: 1300 ACA with clamp probe (* For the Clamp ,CP-1201)
Over Indicator	* LCD display show " OL ". \| * The data save into the SD card will show " 9999 " or " 999 " ( overleap the decimal point ).
Under Indicator	* LCD display show " UR ". \| * The data save into the SD card will show " 9999 " or " 999 " ( overleap the decimal point ).
Data Hold	Freeze the display reading.
Data Record	SD Card Record.

Sampling Time	Approx. 1 second.
Power ON/OFF	Manual OFF by push button.
Real time data logger	* Real time data logger, saved the data into SD memory card and down load the all the measured value with the time information ( year/month/data/ hour/minute/second ) down load to the Excel \| * Sampling time for data logger : 2 seconds to 7200 seconds, the during of setting step are 2 seconds.
Data Output USB/RS232	RS232 computer serial interface : * Connect the optional USB cable USB-01 will get the USB plug. * Connect the optional RS232 cable UPCB-02 will get the RS232 plug. (Optional Accessories)
Operating Temperature	0 to 50°C ( 32 to 122°F ).
Operating Humidity	Less than 80% R.H..
Power Supply	* DC 1.5V, AA ( UM-3 ) Battery X 8 PCs (Alkaline or heavy-duty battery). \| * AC to DC 9V power adapter.

Power Consumption	* Meter : 300 DCmA. \| * Clamp : 34 DCmA.
Clamp max. conductor Size	50 mm ( 2.0 inch ) Dia. ( For the Clamp ,CP-1201)
Weight	* Meter : 948g ( includes batteries ) ｜ * Clamp ( includded cable ) : 467g
Dimension	Meter : 225 X 125 X 64 mm ( 8.86 X 4.92 X 2.52 inch ) ｜ Clamp : 210 X 64 X 33mm ( 8.3 X 2.5 X 1.3 inch )
Accessories Included	* Instruction manual............... 1 PC * Test Leads (TL88-4AT)...........1 Set (4 PCs) * Alligator clips (TL88-4AC) 1 Set (4 PCs) * Clamp Probe ( CP-1201 )........3 PCs * AC to DC 9V adapter..............1 PC * SD card .............................. 1 PC * Carrying bag......................... 1 PC
Optional Accessories	* 2000 Amp current probe, CP-2000 * 200 Amp current probe, CP-200 * Flexible 3000 Amp current probe, CP-3000 * USB Cable , USB-01 * RS232 cable, UPCB-02 * Data Acquisition software, SW-U811