Your cart is empty.
Your cart is empty.Increase or decrease signal voltage (-10dBV and +4dBu) and eliminate ground loop hum simultaneously. Converts between balanced and unbalanced signals. 2 channel box with XLR jacks.
-K-
Reviewed in the United States on February 18, 2020
I recommend this if:you're going from PC - Unbalanced or from Unbalanced DAC ..etc and want to convert to Balanced + higher signal output + get rid of humm-buzz in your setup (which it really does well)..For my rear speakers in a 5.1 setup:- I'm (temporarly) using a crown (XLS 1002)Connections/setup are from unbalanced to the Ebtech -10 via 1/4'' then output From the +4 via XLR to the CROWN. when I did the setup before owning the Ebtech with Unbalanced straight to the Crown I was getting a source humm-buzz hooking the RCA's up etc....- once my Ebtech LLS-2-XLR was set up the HUMM-BUZZ is gone..GONE!!Thank you.//ALSO @SELLER: @RECORDING STORE- thank you for selling this 'amazon fulfilled' .. Much appreciated.STORE PAGE:https://www.amazon.com/sp?_encoding=UTF8&asin=B001022C44&isAmazonFulfilled=1&isCBA=&marketplaceID=ATVPDKIKX0DER&orderID=&seller=A2IFYT7JVWTGRN&tab=&vasStoreID=
Mark E. Sims
Reviewed in the United States on April 9, 2019
Worked like a charm. I did have one problem it seemed to reverse the polarity of the lines going out. I simply reversed the plus and minus connection on a couple of XLR connectors to solve the problem.
Sounds OK to Me
Reviewed in the United States on February 23, 2018
This device does EXACTLY what is is supposed to do, allowing interface between semi pro (-10) and pro (+4) gear. It is clearly NOT a microphone preamp, nor does it claim to be one. As an added bonus it isolated the input from the output, making it an ideal interface between a computer or other problematic audio source and a balanced line level input to a pro sound system. Writing this revue to help balance from a reviewer who unjustly gave a poor review because he BOUGHT the wrong device
Signify
Reviewed in the United States on February 23, 2015
I bought this to help improve the signal going from a mic (xlr) through a guitar pedal to an amp. My understanding was this device would help boost the signal more than the typical drop you get going through an xlr to 1/4 inch adapter. I saw no difference at all. Weirdly, running out from both the +4 and -10 outs, produced the same signal. So, I don't see what this actually does. Nothing helpful for me anyway.
Recommended Products
$129.99
$ 50 .99 $50.99