Your cart is empty.
Your cart is empty.Product Description
Lower Noise
The groove design of the belt allows the teeth of the timing belt to collide with the pulley and the tensioner to allow air to escape in all directions when the engine is working, thereby reducing engine noise
High Performance
The entire timing belt kit has extremely high synchronicity, must withstand the high speed of thousands of RPM, and can also run normally in extreme bad weather. It is resistant to wear resistance, and has a long service life.
MORE STABLE
All accessories use the same level of materials and manufacturing technology, so that the belt water pump and tensioner can provide power in the engine more stably
Kenneth Fleece
Reviewed in the United States on March 7, 2020
Attempted to install this kit on a Chrysler 3.5 motor. As many other reviews mentioned, the tensioner pulley didn't fit. if you have the same Chrysler 3.5 engine in my picture, you will have the same issue.The water pump O-Ring was too big. Just barely got it to fit, but it was frustrating. The tensioner, water pump and timing belt were good though. So one star. I'd normally give three but this seller has to be aware that many people are having this fitment issue but are choosing to ignore it to keep selling the product.I wish I'd kept searching for another kit.
Qwk69buick
Reviewed in the United States on February 29, 2020
WRONG TENSIONER PULLEY, BELT JUMPED TIME AFTER ABOUT 30 SECONDS OF RUNNING, JUST GO TO AUTOZONE, GOING TOMORROW TO BUY NEW TIMING BELT AND WATER PUMP, SINCE TIMING BELT COULDN'T KEEP TIME THERE IS NO WAY i AM GOING TO TRUST THE WATER PUMP EITHER, ABSOLUTE GARBAGE, HOPEFULLY IT DIDN'T BEND ANY VALVES OR i AM GOING TO HAVE TO DO A COMPLETE TEAR DOWN, $75 BUCKS COMPLETELY WASTED HOPEFULLY NOT A LOT MORE. DO NOT BUY DO NOT BUY DO NOT BUY.
Joe Husarik
Reviewed in the United States on January 11, 2020
The parts are excellent and a great price it even arrived early
Customer
Reviewed in the United States on May 9, 2019
This product is exactly what I ordered although amazons fitament chart clearly says this product wouldn't work on my vehicle it DOES! The sellers description is accurate as it reads like it should. This product was shipped very timely and I would recommend them to anyone needing timing components for a 3.2l pr a 3.5l chrysler engine.
sweetace
Reviewed in the United States on May 5, 2019
2004 Chrysler 300m 3.5LThe belt was just a touch bigger(works though), the water pump was a exact match but the seal was a touch to big and rounded(not flat) still worked, pulley was a exact match, tensioner did not work. The position of where the bolts go are up the shaft to high making it impossible for the tensioner to ever reach the pulley. I used the old one and so far so good.Also I have been unable to contact these people.
repair guy
Reviewed in the United States on March 28, 2019
This product worked but, on my 2000 Chrysler LHS, the tensioner pulley did not pull the belt tight enough. The tensioner itself was identical to what came off the car but the pully mount was different causing the pulley to put less tension on the belt than was needed. I put the original pulley back on and, so far, so good.
Joseph
Reviewed in the United States on December 7, 2019
Looks & fits like O.E.
Recommended Products
$102.98
$ 42 .99 $42.99