Your cart is empty.
Your cart is empty.
DIN Rail Mount Power Distribution Fuse Module Board.
Specification:
Work voltage: AC or DC 5~32V, total current rating 40Amp.
PCB Dimensions: 150mm x 72.5mm x 29mm (W x L x H).
Module Dimensions: 153mm x 87mm x 53mm (W x L x H).
Input terminals: pitch - 7.62mm/0.3", current 30A for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw.
P1 output terminals: pitch - 5.08mm/0.2", maximum current 10A for per position, wire size 26~12 AWG, stripping length 7mm, Metric M2.5 slotted screw.
P2-1 to P2-10 output terminals: pitch - 7.5mm/0.295", maximum current 10A for per position, wire size 26~12 AWG, stripping length 7mm, Metric M2.5 slotted screw.
Fuse holders for Medium Blade ATO/ATC Fuse, factory-installed fuses 5Amp. with fuse fail indication function
FR-4 fiber glass PCB, dual copper layers.
fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use.
redman
Reviewed in the United States on January 4, 2025
4 led's not working out of the box.
Wookieecantina
Reviewed in the United States on September 10, 2024
I'm really impressed with this unit, it's really well designed having the ability to utilized fused circuitry within a rather small junction box, with indicator light is fantastic!The unit fits perfectly atop a DIN rail, adding to the efficiency of the piece, combined with the practically of the WAGO junctions and you're pretty much good to go.
Billy Crawford
Reviewed in the United States on January 7, 2021
Love the product but the price is a little high
Android Zulu
Reviewed in the United States on April 20, 2020
A little overkill but for wire surge protection/management/organization but it's a sort of necessary. I bought two, not sure if I will need the other. It's nice to be able to bridge the power from one module/device if need be. It comes with 5 amp fuses preloaded but you can replace them with whatever ampage needed. It snaps in very snug, a little too snug. I was testing it on a din rail and it did not come off unless I slid it off. So I may I have to mount this sideways.
MichaelMSG
Reviewed in the United States on April 19, 2020
Exactly how expected will buy again
Customer
Reviewed in the United States on March 16, 2019
Used this for powering motorized shades. It is very easy to set up. The individual LED lights make it easy to determine when power has been interrupted to one of the lines. Will continue to use for this purpose.
Intelligentsia
Reviewed in the United States on August 11, 2018
This is a nice power distribution panel. The RED led lights up when a fuse is blown, but ONLY if there is an actual load. If there is no active load on the device, then a blown fuse will not be indicated.
northernlights
Reviewed in the United States on May 30, 2018
works fine
Recommended Products
$21.25
$ 10 .99 $10.99