Shopping Cart

Your cart is empty.

Your cart is empty.

ELING 85mm GPS Speedometer 0-120MPH Gauge for Car Truck Motorcycle with 7 Backlights 9-32V (0-120MPH-Black+Stainless Steel)

Free shipping on orders over $29.99

$64.99

$ 24 .99 $24.99

In Stock

1.:0-30km/h


2.Color:Black+black


About this item

  • Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 55mm behind the panel to fit the gauge. Put the gauge in the hole and screw down.
  • 7 Backlights available (red, green, blue, white, yellow, cyan, purple)
  • Securely fasten the GPS antenna, preferably outdoors (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. Do not cut cable.
  • Current speed and accumulative ODO(record the mileage after power off)
  • 9-32VDC(12VDC/24VDC) Working Voltage, 100% Waterproof and anti-fogging protection



Product Description

CX-85GC-80MBS-banner

Product Features:

-Suitable for all kinds of vehicle modification.

-High-brightness LED backlight.

-316 stainless steel for long-term use even in acid-base, humid environment.

-IP67 waterproof and dust-proof grade.

-With curved glass (with anti-fog function).

-Using stepper motor drive pointer, accurate display of the engine speed, and with the LCD display clear display mileage.

Product Introduction

CX-85GC-80MBS-侧面

How to install it?

- Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 55mm (2 3/16”) behind the panel to fit the gauge.

- Put the gauge in the hole and screw down.

- For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable.

CX-85GC-80MBS-1

Why does LCD show Err?

- Turn on supply power after installation.

- Then the meter starts to search for signal and LCD displays "gps---".

- If there is still no GPS signal after 3 minutes. the LCD displays "Err".

CX-85GC-80MBS-2

GPS Speedometer keeps counting?

- After installation in the first time, GPS speedometer needs to search for signal, that's the reason that LCD counts numbers all the time.

- After getting signal, LCD will come back to 0. It is normal.

Technical Data

Fixing dimension 85mm(3-3/8")
Speedometer indicating range 0-120 MPH
Total mileage 0-999999 Miles (Record the mileage after power off)
Backlight 7 Backlights available (red, green, blue, white, yellow, cyan, purple)
Signal GPS
Working Voltage 9~32V DC
Working Current ≤100mA
Operating Temperature -30℃ ~ 75℃
Storage Temperature -40℃ ~ 85℃
Protection grade IP67
CX-85GC-80MBS-正视

How to adjust backlight?

- Power on the power supply first.

- Short press the button to change the backlight color:

backlight changed in sequence: Red (Default)->Green->Blue->White->Yellow->Cyan-->Purple->(Automatic).

- Automatic: Automatically switch the backlight color every 1 minute. Cycle switch according to the above sequence.

CX-85GC-80MBS-合集

Package Includes:

1x GPS Speedometer

1x GPS Antenna

1x multi-plug socket

1x Installation Instruction


Dustyn
Reviewed in Canada on September 27, 2024
Exactly what I ordered
jack a.
Reviewed in the United States on August 21, 2024
Had this installed on my boat – fit perfect in the spot where the old speedometer was very accurate. He ran the antenna up to the front and it picks up very well. It also lets me know how many miles I'm going. Great way to do gas mileage and see how far I've gotten an afternoon. The old speedometer was water pressured. It didn't start register until after 10 mile an hour. This registers from 1 mile an hour up.
Naughty1
Reviewed in Canada on January 22, 2024
I installed it in my older Mack truck to replace the cable drive unit. Connecting was easy and instructions were clear. Love the lighting options and the accuracy.
Recommended Products