Your cart is empty.
Your cart is empty.EPAuto Commercial Grade Dual Head Tire Inflator Gauge with Air Hose, 1/4" NPT, 12" Rubber Hose, 10-160 PSI
B. Reese
Reviewed in the United States on March 21, 2025
Stick with old fashioned reliability. Have had a couple other cheap tire inflator gauges. First, avoid the ones with electronic/digital gauges. They will fail within a year or two and you will be forced to use a separate gauge to check pressure while filling tires. Second, avoid the clip on style chucks. They may seem convenient but most leak and you will be forced to hand hold and jiggle the chuck to ensure it does not leak.At first this inflator/gauge may seem old school but it just works and is reliable.
David Norcia
Reviewed in the United States on February 7, 2025
Excellent tool. reads pressure very well. Does a great job on inflating my truck tires.
P. Bailey
Reviewed in the United States on February 12, 2025
Pretty good but psi reading is off right out of the box by 5psi. Annoying but Injust remember to add 5 psi more...
Gregski777
Reviewed in the United States on January 17, 2025
I now own three of these having bought two for friends of mine. This unit is very well made with an accurate and easy to read air pressure gauge. A great value for the slightly price compared to an older unit I had purchased.
kenneth
Reviewed in Australia on January 16, 2025
unused wating for flat tyre
NE
Reviewed in Australia on June 12, 2024
No dislikes
East to West
Reviewed in the United States on February 28, 2024
TBH - I've not double checked the gauge accuracy, but it all *seems* to be acting correctly. What I really like is the quality of the materials and construction. The brushed/satin finish is smooth, beautiful, and comfortable to hold. The lever works well, the head attaches at it should, and the hose quality is perfect - durable yet fully flexible. I'm very happy with this one - and it doesn't leak!
wayne irvine
Reviewed in Australia on February 24, 2024
this gauge is a lot better than the one I had plus the price is great compared to others that I looked at
TFTFT
Reviewed in Australia on April 15, 2024
Good quality, rather large and cumbersome for home use, maybe suit commercial use.
F J
Reviewed in Australia on December 7, 2023
It was easy to fill a car tyre with out any noticeable air wasted once a quality plug was fitted.Works for me like those I have used in service stations as it is easy to use and seems robust
Mr. Man
Reviewed in the United States on September 2, 2022
This tire inflator with analog air gauge and double ended extension check is the best I've ever owned very high quality material. More expensive by 10 or 15 dollars than the other ones online but a lot less than the really expensive ones and half the price of what you can get for an item that's not even as good at farm stores and hardware stores. The metal is very high quality and nice finished very durable the feel of the air valve trigger is very solid and precise and easy on your hand the rubber is very high quality rubber so it's not going to oxidize and crack anytime soon it worked perfectly no leaks the material like I said is very high quality and I think it will last a long time well worth the money and well worth the relief knowing that I have a quality tool to fill my tires and read my pressure even on tires with 110 lb necessity. Reads up to 150 lb I believe which is plenty for even heavy equipment. I would definitely recommend it and buy it again in the future if I need to
Mark A
Reviewed in the United States on August 26, 2016
Works great. Press onto valve stem, and is tolerant of how you hold it In comparison, the round headed Milton air chucks, which are a fine item in themselves, are less tolerant in that you have to hold perfectly straight or they lose air. Just hold this one like a stick! You press onto valve stem, and you can feel the lever MOVE when its seated. You can then read the pressure, and squeeze the lever to add more air. Temped to drop a star because the bubble gauge reads about four pounds too high, but I can live with that, and didn't drop that star. Four pounds!!, you must think I'm a nut! Just trying to give the best review I can. Yours may be calibrated closer than mine.Knowing that it was reading four pounds too high, I filled all four tires to the same bubble gauge reading, and was within a half pound on my digital air gauge. CAN REALLY LIVE WITH THAT! There's probably a way to calibrate but I see no need to at this time.How did I know my digital air gauge was right, and not the bubble gauge on this tool, you ask? The measurement of my digital gauge matched the numbers that my wife's new car gives on the dash computer readout for each tire as you drive, and yes I drove the car right after I adjusted the air pressure. That verification is good enough for me. Highly recommend!
JJCEO
Reviewed in the United States on November 18, 2016
I have a nice air compressor and I always check the air pressure in our cars and on my tractor. I wanted a tire inflator with a built in pressure gauge and I wasn't impressed with the round dial gauges so I purchased this one. It is ruggedly made and very good quality.The unit has a dual head chuck to attach the inflator to your tire’s air nozzle. It has a liquid filled pressure indicator that in my case was accurate to within 1 PSIG. I checked its accuracy against a high quality digital tire pressure gauge and also with the digital readout of my tire pressure on my vehicles control panel with two different vehicles. All three sources agreed on the tire pressure. The scale on this indicator is calibrated in 2 PSI increments.I just love being able to quickly attach the chuck head and see the pressure in my tire before I start inflating to add in any air into the tire. The lever to air up the tires is easy to use and it really speeds up the airing process using this tire inflator and gauge combination.My only issue is that the unit did not come with a quick disconnect fitting which I had to go pick up at the hardware store for under one dollar. I spent more in gasoline to get there than the part cost.I do like the quality of this unit and I recommend it. It is accurate and it really speeds up the job when you are in a hurry. This unit also looks like the Milton unit and the construction is identical. The Milton nozzle is brass but this EPauto version is chrome plated.This is good quality and I would buy another. 10 months later and still working perfectly.This is just like the models used in filling stations tire filling machines. It is fast and easy to use. This is one of the best investments I have made for my garage and I wish I had purchased this long ago just for the time it saves me.I love just being able to turn on the compressor and not having to go look for a tire pressure gauge and a tire nozzle for the compressor. I found using this very useful this winter as my tire pressure keeps dropping as the temperatures have been very cold. I find that I have to inflate the tires multiple times per month and this tool makes it easy.Having a built in pressure gauge with an easy to use control allows for fast and easy filling of your tires.
Recommended Products
