Your cart is empty.
Your cart is empty.
EPAuto Cabin Air Filter CP776
Compatible Model & Year List:
- Replacement Made for Nissan:
- Altima Sedan (2013-2018)
- Maxima (2016-2023)
- Murano (2015-2024)
- Pathfinder (2013-2020)
- Replacement Made for Infiniti:
- JX35 (2013)
- QX60 (2014-2020)
Cross Reference:
- Replacement Made for INFINITI: 27277-3JC1A, 27277-3JC1B, 27277-3JC1C, 27277-3JC2A, 27277-9NM0A
- Compatible with FRAM: CF11776
- Compatible with ECOGARD: XC10020
- Compatible with ACDelco GM Original Equipment: CF3353
- Compatible with AirQualitee: AQ1228, AQ1228C
- Compatible with Baldwin: PA10031
- Compatible with Beck/Arnley: 042-2212
- Compatible with Carquest: 479950
- Compatible with Champ: CAF1903P
- Compatible with DENSO: 453-6090
- Compatible with Duramax: DC1903P
- Compatible with FVP: F0009
- Compatible with GK Industries: CF1351
- Compatible with Hastings: AFC1550
- Compatible with IMC: 819 38 016
- Compatible with LUBER-FINER: CAF1903C, CAF1903P
- Compatible with MICROGARD: 4068
- Compatible with Mighty Distributing System: CAF2098
- Compatible with Mobil 1: CAF1903
- Compatible with NAPA: 230013, 2230013
- Compatible with Parts Plus Oil by Ashland: CAF9932
- Compatible with Partsmaster Division: PP10009
- Compatible with Premium Guard: PC9932, PC9932X
- Compatible with Prime Guard: PCF-ALTIMA, PCF10009
- Compatible with Pro-Tec: 804
- Compatible with Protune Suspension: 5005-479950
- Compatible with PUREPRO: C48162, CAF1903
- Compatible with Purolator: C48162, PBC48162
- Compatible with Service Champ: C48162, CAF1903
- Compatible with Service Pro: MC10020
- Compatible with STP: CAF1903P
- Compatible with Transbec: XC10020
- Compatible with TYC: 800177P
- Compatible with Ultraflow: PHP8162
- Compatible with VALVOLINE: VCA-1082
- Compatible with Warner: WCAF1903
- Compatible with Wix: WP10009
Philippe-Daniel Brin
Reviewed in Canada on May 12, 2025
Same dimension as OEM, installing it in a 2021 Murano is difficult... if you are not up to it, you might want to have it replaced my your local shop/dealer.
EW
Reviewed in the United States on March 29, 2025
Short answer = filter is great. Good option for a replacement.Long answer = Thankful for Youtube videos to explain how to install this but... wow... what a pain. The filter opening on the 2017 Nissan Murano is actually too small for the filter so you squash the old one to get it out and carefully squash this one to get it in. Thankfully, the filter mostly puffs back out to original size once installed. All of this on my hands looking up under the glove box. Sadly, I also broke the clip on the filter cover. Ugh!! Couldn't be any harder if they tried.Good filter for a good price but Nissan needs to go back to the drawing board.
Ed
Reviewed in the United States on March 29, 2025
good quality product
Alexander Girich
Reviewed in the United States on March 24, 2025
Good quality of the filter and very fair price
Customer
Reviewed in the United States on January 13, 2025
It is more heavy duty then the factory one worked great.
Judy Garcia
Reviewed in the United States on September 20, 2024
Changing the air cabin filter is hard on my 2013 altima because of the placement but that’s not the filters fault! The filter feels like it’s good quality and looks just like the one I got last year at autozone, just cheaper. I’ll have to see if there’s any difference in air flow but so far i’m a fan of the price and quality.
sohappy
Reviewed in Canada on July 15, 2024
Easy job , Use a small pick or screw driver to get the old one started to remove . I used a vacuum with small attachment after old filter was out to clean out bits of leaves etc so the new filter would start at best scenario . Use a light so you can see up under the dash to insert the new filter , insert edge quarter way from the bottom and slide up,once the top is in compress the bottom a bit , and then from the back slide it into the slot , done in 20 seconds .
Kenneth C.
Reviewed in Canada on May 5, 2024
This filter fit on my Infiniti QX60. The material is very good, I would say it's even better than the factory one. I have a tough time removing the old one but easier to put this filter back as it's more firm. It fit perfectly. highly recommended if you know how to install it.
THUAN TRAN
Reviewed in the United States on December 9, 2024
Easy to replace and working good.
Sam Beane
Reviewed in the United States on October 26, 2024
Filter is highest quality I've seen and arrived earlier than expected. Will definitely buy again.
2023 November
Reviewed in the United States on October 11, 2024
Not sure if it’s supposed to cancel the occasional moldy smell coming from my a/c but it’s better than the dirty filter I had in my cabin before this
B
Reviewed in Canada on August 23, 2023
Very difficult to install, unless you are a small person. There is very little room on the floor under the dash to access the panel. You need to remove for the air filter. The hole for the filter is approximately 4 inches. The filter is approximately 8 inches. Not worth my time or effort to attempt to change this poorly located cabin air filter. Went to Nissan instead, would not recommend to install yourself. I returned product
Rob Bennett
Reviewed in Canada on March 25, 2022
2020 Nissan Pathfinder - not easy to install.This is not a problem with the filter. The filter is well built and will do the job perfectly.This filter did have fewer folds than the stock filter, but I don't think that will make any difference as a cabin air filter.After a year and a half, I decided it was time to change the cabin air filter in our 2020 Pathfinder. Nissan engineers placed the cabin filter right up against the firewall and designed a system where you cannot easily see, or get you hand/fingers in place in order to pull out the filter. These engineers either have very small hands or employ a contortionist on their design team. (Can we say "dealer replacement at half an hour shop time plus cost of filter?") The filter fits snug and there is absolutely no way to grip the filter without crushing part of it first. I have seen videos of people reaching up and pulling out the filter - this did not work for me. I could not get a good enough grip on the filter. After removing my cut/bleeding hand from under the dash, I took another route to the filter housing. I spent an extra 10 minutes - removed the 9 screws holding the glove box in place - and removed the glove box. This gave me much better access to the filter housing. To get the old filter out, I had to crush part of it and use a set of needle nose pliers to pull it out of the housing.The new filter slipped right and fit the filter housing perfectly. However, it will be another pain in the butt to get out when replacement is needed.Thanks Nissan engineers. :-(
Recommended Products
