Your cart is empty.
Your cart is empty.Product Description
CPE Fuel Line
Compare
6AN | Size | 6AN |
NO | Compatible with E85 | YES |
750PSI | Working Pressure | 1500PSI |
2250PSI | Burst Pressure | 4500PSI |
-40°F to 257°F | Temperature Range | -76°F to 446°F |
63.5mm | Min Bending Radius | 88.9mm |
6AN | Size | 3/8" |
NO | Compatible with E85 | NO |
750PSI | Working Pressure | 300PSI |
2250PSI | Burst Pressure | 1160PSI |
-40°F to 257°F | Temperature Range | -40°F to 257°F |
63.5mm | Min Bending Radius | 100mm |
- PTFE Fuel Line
- NBR Fuel Line
-
-
Marine Fuel Hose
Conforms to USCG Type A1-15 SAE J1527. Widely used for supplying fuel to motors in boats or marine.
-
Transmission Oil Cooler Hose
Conforms to SAE J1532. Provides a safe, heat and oil resistant connecting between oil cooler and transmission or engine.
-
NBR Rubber Fuel Hose Line
Conforms to SAE 30R7. Widely used as a fuel line, emission control line, fuel return line, etc.
-
Fuel Injection Hose
Conforms to SAE 30R9. Wildly used in fuel line, return line, fuel pump, EFI, LS swap, etc.
-
Swivel Hose End Fitting
The swivel fitting is working with nylon braided and stainless steel fuel hose.
Louis
Reviewed in the United States on May 3, 2025
Hose and fittings seem to be of good quality. Unfortunately as others have stated fittings are for 3/8 and hose is 1/2”. I bought it a few months ago so I am outside the return window.
This is junk it doesn't connect to my phone
Reviewed in the United States on April 17, 2025
Everything was perfect
Darrel
Reviewed in the United States on April 14, 2025
line was 2 big for the fittings. returned it and got another one, same problem. looked like decent quality product. but sent me a 1/2 line for a 3/8 barb twice. returned and went with a different brand.
Olivia Becker
Reviewed in the United States on December 20, 2024
Evil energy products are great I've used them multiple times on car builds. High quality fuel lines at a great price.
ayocee
Reviewed in the United States on December 14, 2024
Full disclosure: I ordered this partly because the listing itself is confusing and I wanted to see what would show up. At the time of my order in December 2024, the 8AN kit is labeled as "EVIL ENERGY 8AN Fuel Line Kit, with 3/8 6AN Push Lock Fitting". The description throughout the listing also bounces between 6AN and 8AN interchangeably. Since 6AN fittings won't work on 8AN hose, I was curious to see if by some chance they were shipping adapter fittings that provide 6AN ends on an 8AN hose, but I expected that the real answer was actually a 6AN kit.Sure enough, as I suspected, the kit that showed up is entirely 6AN and is labeled as such on the box itself. The hose itself has a nice dense nylon weave with a wire mesh embedded in the hose itself, and as appropriate for 6AN, it's 3/8" internal diameter. The hose ends are all push-lock style with 9/16"-18 threads that match up perfectly with my existing 6AN fittings. Everything goes together nicely and I have no concerns about building a fuel system with it.Overall this is a good quality kit, it just needs to be properly advertised as 6AN. I'll still put this to good use as I have more use cases for 6AN than 8AN, but in a different situation I could see this being a significant problem.
Recommended Products