Your cart is empty.
Your cart is empty.Product Description
CPE Fuel Line
Compare
8AN | Size | 1/2" |
NO | Compatible with E85 | NO |
750PSI | Working Pressure | 217PSI-300PSI |
2250PSI | Burst Pressure | 1160PSI |
-40°F to 257°F | Temperature Range | -40°F to 257°F |
88.9mm | Min Bending Radius | 120mm |
8AN | Size | 8AN |
NO | Compatible with E85 | YES |
750PSI | Working Pressure | 1500PSI |
2250PSI | Burst Pressure | 4500PSI |
-40°F to 257°F | Temperature Range | -76°F to 446°F |
88.9mm | Min Bending Radius | 101.6mm |
- NBR Fuel Line
- PTFE Fuel Line
-
-
Marine Fuel Hose
Conforms to USCG Type A1-15 SAE J1527. Widely used for supplying fuel to motors in boats or marine.
-
Transmission Oil Cooler Hose
Conforms to SAE J1532. Provides a safe, heat and oil resistant connecting between oil cooler and transmission or engine.
-
NBR Rubber Fuel Hose Line
Conforms to SAE 30R7. Widely used as a fuel line, emission control line, fuel return line, etc.
-
Fuel Injection Hose
Conforms to SAE 30R9. Wildly used in fuel line, return line, fuel pump, EFI, LS swap, etc.
-
Swivel Hose End Fitting
The swivel fitting is working with nylon braided and stainless steel fuel hose.
Levan
Reviewed in the United States on February 8, 2025
They are normal rubber wrapped in braided mesh and not ptfe but these fittings should work well regardless. This kit comes with a whole lot of different kinds of fittings for most applications and even brackets for running them very cleanly along the frame or the side of a transmission.
Gregory Girard
Reviewed in the United States on January 15, 2025
This is a good quality fuel line. The material looks nicely when your finished installing. Everything you need in one kit. Good value for the money spent.
Recommended Products