Your cart is empty.
Your cart is empty.Product Description
Cici D.
Reviewed in the United States on May 23, 2025
Works great and truly goes hard within an hour. Cures completely in 24hrs. You have to work FAST because this will start processing within 10 to 15mns of A and B being mixed. Make sure you get rid of as many bubbles as possible before it starts turning to taffy otherwise you are stuck with it. Also do not use the rubbing alcohol spray method to remove bubbles with this resin, it will harden with weird ripples on the back. Just use a flame. Not a good idea to try and do a lot of mix for colors because of the reaction window and certain pigments accelerate the reaction. This also gets hot because of the chemical reaction, so make sure you have good quality molds to work with. Absolutely do not recommend on cups because of the short working window. It does have an odor. Not terrible but it definitely has a smell. My guess whatever compound is used to accelerate hardening is what the smell is. I've never detected that smell in regular resin. This resin is great if you need to produce small pieces in a short period of time aka custom orders you don't want to wait 3 days to finish curing without the use of a dehydrator. I plan on buying this again once I have the funds.
Anouska Grundeken
Reviewed in the United States on March 15, 2025
I am fairly new to working with epoxy and I was overwhelmed with all the choices. I wanted a fast cure epoxy for my tumblers but many are incredibly expensive. I chose this one for the price and because it's made in the USA and I am absolutely not disappointed! My tumblers are ready to take off the spinner in an hour where my regular epoxy has to spin for about 24 hours. Took my respirator off for a bit to see check the smell and not bad either. Easy to mix, barely any bubbles and easy to use. I will most definitely keep buying this!
Christine T.
Reviewed in the United States on February 11, 2025
I have been working with epoxy resin for years, and I have worked with probably 30 different brands, types, etc. From high end art resin to some of the cheapest options available. This 1 hour fast cure resin is pretty amazing! I was quite surprised! Besides the obvious, that its cure time is crazy fast, but it is also very affordable, it has minimal bubbles, it mixes so easy, you don't even need to mix for a full 3 minutes. Plus it's easy to work with. Once mixed, even without a hot water bath, it is not super thick. You do have to mix in smaller quantities as it doesn't have a long working time, but for small projects or multi layer pieces it is Amazing! I have purchased it 3 times now and will continue to do so. TRY IT!
Anna M.
Reviewed in the United States on April 15, 2025
Used this as a top coat and 2 months later it is cured but is still not rock hard. I will try it again and if I get better results I’ll update my review.
Whitney Wallace
Reviewed in the United States on April 14, 2025
My last order arrived with one bottle leaking around the lid. To my surprise, Amazon requested that I return the item for them to replace it!?! I was dumbfounded that they would actually want me to ship back to them a leaking bottle of resin to potentially ruin other people's mail in the process!! Thankfully, I asked to speak with someone else and the new associate was not an idiot. So, I did get my replacement. The product itself is my new go to for almost every thing that has to do with Tumblers. You cannot add pigment to this resin though so keep that in mind if you are using it for anything other than a topcoat. It will not work for Milkyways or beach waves. But it does crystal clear and in 1 hours! I wish I had found it sooner
Marytb27
Reviewed in the United States on April 13, 2025
This has become my go to epoxy! I had so many half finished projects. This has helped me finish them up. Clear formula. I haven't had any issues with bubbles. And the 1 hour fast cure to touch time is absolutely amazing!
CROW'S NEST CREATIONS
Reviewed in the United States on December 27, 2024
So I have used probably 20+ different brands from cheap to way over priced. I was looking for a new brand that i could use only their products. Let me tell you, this has the most perfect viscosity of ANY resin i have tried. So my first trial, I was top coating tumblers. Here is what I found:1. My room temp 68.4 F2. Humidity: 53%3. Batch size: 30 ml4. Mixing review: started mix at 1015am. Gorgeous low viscosity, mixed 3 minutes with popcicle stick, since they produce more bubbles. Quick mixing and ribbon dissipation with scraping sides and bottom of the cup. I'm a nurse by trade and have the nose of a bloodhound and this has very little to no odor in my working environment.4. Degassing: bubbles released immediately in this small batch.5. Work time disclaimer: GET EVERYTHING READY BEFORE YOU MIX! Be prepared to start at once. This cures in 1 hour so working time is less than 10 minutes.6. Work material: glitter burnished stainless steel 20 oz tumbler.7. Application: resin glided over the glitter with ease. Application was like silk. Drizzled slowly on tumbler as it spun on turner and coated with gloved hand. Resin covered and self leveled quickly. Ran torch over quickly to pop any friction bubbles from rubbing product on. Left to spin dry.8. Resin was noticeably warm by minute 6 and started getting thicker at minute 10. But was still workable.9. Outcome: cure to fingertip touch at 45 minutes. And at 1 hour if you pressed your fingernail you would leave a slight indent. Full unrestricted and unprinted cure at 68.4 degress achieved at 1:30 minutes. I'm sure if my studio was over 70 it would have been much quicker.Overall, the 1 hr fast set from promise has luxurious low viscosity, easy degassing, mixed like butter and amazing cure time. This is my top coat of choice for sure.Professional pearls: i would not use this for marbling or techniques that would require your pigments to move and shift, dry and work time will reduce that movement. Don't spray it with alcohol, it degasses great on tumblers with a light torch. From experience fast sets can get an amine blush with alcohol. As far as mold casting, thin molds only as this stuff is lightening fast, pour too deep you might have a flash cure. I can't wait to try this in some high detail coaster molds. This is now my holy grail for top coats, hands down. It also is pretinted blue in one part, which is vital to prevent yellowing. Super easy clean-up with 91% ipa.Considering i poured in lower temps than manufacturer recommends, purposefully introduced bubbles with popsicle stick, and had a lower humidity, this out performed every fast cure I have ever tried.I'd give it 100 stars! Buy it. Try the small bottle first....trust me, your going to go back.
fran b.
Reviewed in the United States on November 29, 2024
i only got part A of the promise fast cure resin brought them as a set still need part B
Recommended Products