Your cart is empty.
Your cart is empty.FastRack, Auto Siphon Clamp, 1/2" Gravity Bottle Filler and 6.5' Hose, Clear
Fred Thompson
Reviewed in the United States on March 6, 2025
Well, the pump DOES work but you must pump about 3 times to get good flow. The instructions don't mention that.The bottom part of the siphon fits tight on mine but I add a couple of dabs of pure silicone caulk to ensure it stays in place while it's in use. Remove them and pull the end piece off for cleaning.I haven't used the bottle filler so have no opinion but did note the comments that it dribbles.The tubing is pure junk. It's too rigid and arrives folded with 3 permanent kinks. The rigidity and kinks mean you need 2 people or the hose will remove itself from the destination container.I chose to spend another $16 to order https://www.amazon.com/dp/B076X1ZKP6 2841482 Silcon Med-X Unreinforced Silicone Tubing - Platinum Cured Medical Grade, 375" (3/8) ID, 625" (5/8) OD, 50 ft. I'll probably use 7 feet of it with this syphon and the rest for other projects.$7 will get you a 5 foot silicone tubing at https://www.amazon.com/Eastrans-Silicone-Tubing-Flexible-Brewing/dp/B0C8J37L9XThe bottle filler leaks. The hose is stiff and kinked, restricting flow
roy cook
Reviewed in Canada on February 25, 2025
Very poor quality.. bought 2, one to have on hand incase. Sooooo 2 showed up and one was broke right in the package in a undamaged box. Started a return. (No problem) So I ordered another before trying it. (Number ³) Yeah..... The Little stopper at the bottom was already out. Frig sakes.. so opened the third one just now and the place the syphon in the tube and the whole end fell out... So good luck. I don't normally leave bad reviews but this product sucks a**
Dan S.
Reviewed in Canada on January 15, 2025
Hose came folded and kinked in an unusable way. No matter what I tried to unkink the hose, no fluid was being transferred. Waste of money.
Cathy Combs
Reviewed in the United States on September 18, 2024
Bought for watering house plants. Fits in large water jug. Works great.
Jenn
Reviewed in Canada on July 15, 2024
Went to use this this weekend only to find the bottle filler was missing. The hose was kinked in two spots but it is also extra long. But I can't complete my wine bottling without the bottle filler.
Jon S.
Reviewed in the United States on May 21, 2024
This kit was cheaper than buying the siphon outright. The siphon is really great and is worth the money. The tubing that I received was permanently crimped, which made the process very difficult since I needed two people to hold it straight enough to flow liquid through. The "siphon clamp" can't be used with glass carboys with normal neck sizes: the siphon would need to clamp into the inside of the neck and the angle does not work. You can use the clamp for buckets and jars with wider openings. The "gravity filler" has no retaining tension other than liquid pressure, so it will drip if you have low pressure- and you will have low pressure if you are using the included tubing.
Customer
Reviewed in the United States on December 5, 2024
Easily drains carboys in without a lot of spillage. Clean up is quick and easy.
Ryan Taylor
Reviewed in the United States on January 21, 2024
The FastRack Auto Siphon is a lifesaver for my homebrewing adventures. The 1/2" diameter siphon and 6.5' Hose make the transfer process a breeze, and the clear design allows me to monitor every drop to ensure I'm not pulling any trub. It's a must-have tool that has significantly improved my brewing efficiency.
Frankyj739
Reviewed in the United States on December 26, 2023
After watching some videos on your tube about home fermentation I realized pretty quickly I’d need one of these. I thought the price was good and went ahead and got it. The material is good quality and everything works like it should but I will say the clip that holds the siphon in place could be a little more sturdy but this thing still gets the job done just fine! The 6 foot hose is nice too I can put my jug on a table and siphon into an empty jug on the floor. I love having this and it makes everything so much easier and cleaner and I don’t have to spend as much time filtering the finished product.
Joe Hobbs
Reviewed in the United States on December 22, 2023
I've bought fastrack stuff before, I thought the quality would be similar. I can't fathom how some companies sell things...don't they TRY their product before selling them? The bottle filling tip does not have a spring holding the ball valve in place. This means the siphon is relying on the weight of the liquid in the tube to hold the hard plastic ball valve against the hard plastic seat to make a seal. This is of course silliness and impossible and means the siphon dribbles constantly. So EVERY SINGLE TIME it's pulled out of a bottle there is a mess.Plus, you can't leave the bottle end in a bottle and go prep the next bottle because the weight of the hose is more than the weight of the liquid inside the hose...so if it's sitting in a bottle, the ball valve is up and it's siphoning. Don't turn around, your bottle will overflow.Also, the one-way valve at the carboy end of the siphon is not glued or otherwise secured in place. It's a very light pressure fit. So, one day it just fell off inside my brew, leaving me without a functional siphon.This product is a joke, it's worse than the no-brand China junk one I had before. I hope Fastrack will test products before they slap their brand on them because this completely eliminated my trust in the name.
adam3914
Reviewed in the United States on December 19, 2023
The siphon seems to work fine for me and arrived in one piece. The only problem I had with it is the long 1/2 tubbing is kind of stiff and will kink if you are not careful.
Recommended Products