Your cart is empty.
Your cart is empty.FelPro gaskets offer 100% vehicle sealing with applicationspecific materials to give you sealing solutions with the performance and durability professionals trust
Twoklebbs
Reviewed in the United States on June 10, 2024
I have no idea how good or bad this gasket set it, because I never opened it. In the product description, under Country of Origin, it clearly states 'USA'. Take a look at the package description. China-10 items, USA-3 items, Taiwan-2 items and Vietnam-2 items. Not a very accurate description. Not happy with FEL-PRO!
greg
Reviewed in Canada on April 23, 2024
Work great so far
Ian B
Reviewed in the United States on January 4, 2021
Bought this for my 2007 Chevrolet Impala LT with a 3.9 liter AFM (active fuel management) engine. The car had an oil leak that I have been tracking down for the two years since I owned it, and it seemed to be coming from the lower intake manifold gasket, or valley gasket on the drivers side of the engine. A little oil dye and black light confirmed my suspicions. The car was leaking when I bought it with 80,000 miles in 2019, and I continued to top off oil until I found the issue at 120,000 miles. Amazon didn't list this kit as fitting my car, but after reading the comments of others using it for the same engine, I decided to give it a shot. The kit went in well, and is clearly better built than the original AC Delco kit that was in the engine. There was several parts in the kit that I never found a spot for, however, I was able to replace every gasket that I took out, minus the heater hose O-ring (you will need this). After putting everything back together, the only think leaking was the heater hose. I was able to find this part at my local dealer GM Part# 24504709 for under $2. I was unable to get the rubber grommets for the valve cover bolts out of the cover to replace them, and the old ones were fine, so I didn't use them. There was one coolant crossover gasket that didn't go anywhere in my job. I found no use for the 12 little O-rings that were in the kit, they might have been for the bolt heads, but the old bolts didn't have them, so I didn't use them. There where three other gaskets, one for the air hose near the air cleaner box. The other two I found no use for. I found there to be more than enough RTV in the kit, if you only use it in the places GM suggests (on the ends of the valley gaskets where the heads meet the intake, and on the valve covers where the upper, lower, and valve covers meet). I'll update later on how the kit is holding up. This is not a job for the faint of heart, It was the most intrusive job I've ever done, and It was intimidating. I would suggest labeling every electrical connector, bolt, and hose as you go. I numbered mine so that i was able to do the job in reverse. Prepare yourself to disconnect or remove nearly everything around the top of the engine.
Mell
Reviewed in the United States on July 15, 2020
Works like a charm an u will need to call the dealer to order that (o-ring) that goes to the hard coolant line at the front valve cover on the coolant filler neck, less than $2 if u go there save on Shipping.. no leaks
ray cunningham
Reviewed in the United States on July 30, 2019
Bought this for my 2007 impala with a 3.9 motor. Fits perfectly and comes with everything for the lower and upper intake, valve covers and coolant crossover.
Recommended Products
