Your cart is empty.
Your cart is empty.
Specifics:
the fender flares to prevent collision hurts on the wheel tires
Suitable for most of popular vehicle.
Makes your car better Show 3D vibrant after installation.
Material: High strength soft rubber.
Length: approx.1.5 meter/4.9ft
More specifics of wheel fender,please check on pictures.
Color: Black
Package Includes:
4pcsx 1.5m Car Wheel Tires Eyebrow Strip
How To Install:
1.Clean the pre-installed position,make sure the position is clean and dry before you install.
2. Measure the length of tail in need.
3. Cut off excess length if too long,heat it if possible .
4. Use the adhesion promoter(wipe paper) to wipe the pre-installed position,then waiting about 10 seconds.
5. Tear the cover of the glue of one end of car wheel rubber strip then stick on car.
6. tear more cover of glue slowly and stick it on car slowly with strength.
Tips to prevent car fender flare fall off:
1.Please install the car wheel fender in good weather day or warm indoor.
it would be better if use a heat gun to heating the item;they go on easy if you heat up each section of the rubber.(HIGHLY RECOMMEND)
2.Follow installation instruction.
3.Leave the car alone for 24 hours after install the wheel fender flare.
PS: if pursuit more higher adhesive quality please strengthen the fender flares by car glues(not included) just spread it thin and bam all you trim is holding tight,
please use adhesive remover((not included)) while disassemble the auto fender flares .(Normally Not Recommend)
Please feel free to email us if there is anything about the item
Daniel N sr.
Reviewed in the United States on November 13, 2024
They came on time !
1975BroncoJunk
Reviewed in the United States on September 28, 2023
After reading several reviews and people having trouble with this item, I can concluded that it was installation error and people not understanding how to properly install these fender trims..At this price point of $40 I decided to go with this universal type fender guard /flare.I recommended installation of these flares are to have a clean vehicle. Use isopropyl alcohol to degrease, fit your flare and cut to length, you'll see that I taped the part to my tire and then I heated it with a heat gun to soften the rubber and form it to the fender circle and this can be done different ways with your tire or make a "form"..But heating the rubber and forming it before installation is highly recommended.After you have the flare softened cut to length, you will want to re-clean your fender with the alcohol and apply the promoter they provided. I did have 3M adhesive promoter that I used rather than a supplied promoter and preheated the fender and the flare during insulation and work slowly around the fender while pulling the red backing off the double-sided tape.Overall, I am very satisfied with the look in the protection these will provide to my offender edges.For reference, I have a 2016 f150. There is plenty of material to do the front fenders and exactly the right amount to do the rear fenders. If you have mud flaps in the rear and you can see where mine ended, I think I only cut about 2 inches off the rear flare.There are limitations so this product in depending on your radiuses of your fender is how well they will fit. I see some Chevys with square wheel wells and I don't know why you put a square wheel well on around tire but they may not fit well on the Chevys with the square wheel well openings
PJ
Reviewed in the United States on July 24, 2022
They will start coming off two days later but the biggest problem is the sticky tape stays on your vehicle but the rubber fender flare falls off. Took three hours to remove the sticky tape from my car. I thought possibly I received a bad set so I tried it again and got same results. You cannot say you were not worned
long
Reviewed in the United States on May 2, 2022
These rubber flare strips are good quality strips, tuff and durable. The only con was the adhesive that comes with it, it’s cheap and doesn’t stick well even with adhesive promoter. Do yourself a favor and replace the cheap adhesive that comes included with these rubber flare strips with some quality 3M 06382 OEM Black Automotive Acrylic Plus attachment tape on amazon. After I replaced the cheap molding tape, it worked awesome with the 3M 06382 tape. No way it’s coming off now. These manufacturers really need to get rid of the cheap molding tape and use real original 3M molding tape on their products instead.
ZOE
Reviewed in the United States on May 10, 2022
Replaced supplied tape with 3M double sided tape. The flares are great. The tape supplied needs to be stronger.
Milhamman79
Reviewed in the United States on March 1, 2022
The fenders are EXCELLENT if you are looking for a small flare! They protrude about .5 of an inch from the body when installed. The adhesive is very good, just make sure to clean the surface with alcohol, very well, before you install! The only issue potentially, is making sure the flare is placed properly before installing. If not it will have an "out of round" look to it. PRO TIP....use a sharpie and a piece of cardboard. cut it into an "L" shape so you can have a guide to run along the inner fender. Tape the cardboard to the sharpie and make sure the cardboard is 1 inch distance from the tip when taped to the sharpie. It will make a perfectly spaced line on the car where the rubber fender can be placed. Hope that makes sense 🤷
Tonia Fildes
Reviewed in the United States on December 2, 2021
This product is total garbage; the adhesive is not very strong at all and doesn't make a very large area of contact with the car. They fell off right after I put them on. They are now in the trash.
Steve P
Reviewed in the United States on January 8, 2020
When shipped they are rolled and when you try to install the fight the shape of the fender. Yes i tried heating up, starting in the sun then a heat gun. Then the double back tape the have in the kit is not strong enough to hold them in place. I think with stronger double back tape and rolled to a larger diameter (in the direction they are to be installed) they would be great.
Recommended Products
$299.95
$ 99 .00 $99.00