Your cart is empty.
Your cart is empty.Custom build a storage solution that fits your needs. With individual drawer and slide mechanisms, featuring full-slide capability, each Systainer lid can be fully opened. Designed to work with 32 mm systems for layout and construction. Compatible with Classic or T-LOC SystainerS. Maximum load 44 lbs. SystainerS sold separately, includes five (5) drawers. Box construction should be 16-13/16" (427mm) wide by 14-31/32" (380 mm) or more deep, with a minimum of 1/2" (13mm) under the bottom drawer and 5/16" (8mm) above the top drawer. See manual for more information.
Markus
Reviewed in Germany on March 20, 2025
Schnelle Lieferung super hab sie heute verbaut
Daniel H.
Reviewed in the United States on May 13, 2024
I like the drawers for the systainers. They are full length slides so as long as the top of your bench or counter doesn't stick past the front too much you can open the systainer without having to remove it from the drawer. They were very easy to install if you drill the holes with metric 32mm system. The directions that came with the drawers were sufficient, but didn't have a lot of detail. I watched some videos before making my decision on how large to make the cabinets and it all worked out great.
Customer
Reviewed in the United States on January 16, 2024
The drawers are solidly built. I like that one can be installed on the bottom of the Festool Mobile Workshop. (MW1000). My only wish is that Festool would blend the dimensions of the drawers with the Sys Rails allowing them to be used in the same single stack cabinet. I’m not knocking Festool or each item. I like the idea of using the drawers on the top of the cabinet for items needed regularly with the Sys Rails below holding items that are not used as often. All components work well, just an observation I’ve made. I know I can create an offset to accommodate the difference, but those extra steps could be eliminated with some type of dimension planning. I also understand that the Sys Rails work on the larger Systainer variants as well which complicate the design request.
Fyasko
Reviewed in the United States on January 14, 2023
Love the look and feel for these trays. Saves time and materials and just work so I’m a buyer
T. Beaulieu
Reviewed in the United States on June 2, 2022
While I dislike the cost of these, I love the product. I've now built two cabinets, housing seven boxes of these drawers. No more stacking and unstacking. The lock works great. They slide easily in either direction and installation couldn't be quicker or easier. You do need to pay attention to inside dimensions to prevent binding, but there's another detail to really watch for. Plywood is getting thinner! My last batch of $90 plywood is 11/16" thick! If you build shared vertical dividers and expect to install drawers with euro screws into both sides, you may have to grind the screws or buy shorter ones. The bottom drawer in each bay, of course, will cause this issue. After that, it depends on your assortment of systainer heights, as to when you will have collisions. I was forced to repair several holes with chopsticks and CA glue/re-drill when a screw bottomed out and stripped the hole.
Ron Killian
Reviewed in the United States on November 15, 2022
Last couple years I've really gotten into Festool, tools. I know there are people who don't like them or complain about the price, but for the most part, I think they are worth every penny. with collection comes all the systainers and where to put them. I had lots of room under my assembly table, so figured that would be a great place to put some systainers and these are perfect for that purpose.One thing I really like about these is that use grub screws to install them. Since they use grub screws you simply do 5mm shelf pin holes. Gave me a chance to use my LR-32 hole drilling system. Wow, once you figure it out, it's such an amazing system. Once I got going, I knocked out like 6 panels so quickly. Course the drawers come with a detailed instruction sheet, Festool professionalism as usual. Once the panel are done and installed, the drawers go in quick and easier. Such much better than the hassle that usually comes with standard drawer slides.Drawers slide so smooth and easily. I wish they extended a little more, but it's not the end of the world. Just make sure you have room above, to be able to open the systainer lids. Drawers are well made and look fantastic.Very happy, on my second set of 5, would recommend.
James D
Reviewed in the United States on February 11, 2021
I purchased these having extremely high expectations based on the price and the Festool brand. Not all of my Systainers are compatible with the Sys rails, and I wanted something that would. I was not disappointed. The drawers very sturdy and fit every generation of Systainer I own. The locking mechanism works well for wheeled carts and the label slot makes sure tools get returned to the right drawer.The only thing that would make these better for my use case would be soft closing drawer slides. But that isn't super necessary.
Jeffrey Crnogorac
Reviewed in the United States on March 22, 2020
These are not cheap - but neither are good slides which are about 70% of the expense here. They come with euro screws - which for me are hard to find locally. The quality is great and they are a huge time saver, which is where they presented the greatest value to me. I could make drawers, but I'd rather use my precious time elsewhere - at the same time I have mild OCD and these things helped me get super organized. I have a small shop and these have been critical to getting the most out of my space. I got 20 so far and might get another 10 before the year is out, then I should be good to go.Picture is a work in progress shot, but you get the idea how they are used. I've moved them up and down several times so far, pretty sure this is always going to be a work in progress for me...Shipped FedEx from 2 different suppliers both times I have purchased and each time arrived within 4 days.
fraisse cedric
Reviewed in France on March 2, 2020
très pratique pour rangement dans véhicule avec caisse makita, festool, berner, systainer
Renov services
Reviewed in France on February 29, 2020
Excellent produit
Keith
Reviewed in the United Kingdom on April 9, 2020
OK so these are expensive, but they really work nicely and look great. They don't work well with the SORT style sustainers as the bottom sustainer drawer wont open while the unit is on the pull-out drawer. I made up a packing piece and its now OK but not perfect. They work well with all other sustainers.
Recommended Products
