Your cart is empty.
Your cart is empty.You will get 1 piece 50 feet fiberglass.This list is for alkali free glass fiber cloth/fabric 50 feet by 40" (4.12oz/sq yd)Plain weave Color: White Fiberglass cloth is a woven material available in various sizes to allow custom strength, thickness, and weight in projects. Fiberglass cloth provides great strength and durability when layered with a resin to form a hardened composite. Fiberglass cloth has many advantages: Fiberglass cloth has greater tensile strength than steel wire of the same diameter. Excellent fire and heat resistance Thermal conductivity (making it useful for insulation applications) and chemical resistance properties similar to glass Durable and economical heat insulation, insulation, high-temperature resistance, inflaming retarding, fireproof, corrosion-resistant etc. folded up in a box.
SICMETALS
Reviewed in the United States on October 6, 2022
This is some very nice glass, smooth, no runs, no issues with loose weave....however... I have tried 3 different resins and two epoxies. Saturation (wetting out) is extremely difficult. To be fair here I am not an amateur, I have the proper tools, use specific mixes etc. It just does not absorb resin well or quickly, which really causes some issues if you are doing a large mold by hand. I have not tried vacuum with this cloth but from experience with other cloths that act the same way I would assume the results would not be much different than those and would provide satisfactory results in small batches. Expect to use more resin than normal with this cloth. Otherwise the finish product has been great, strong and light and sands very well. Whatever you do though be sure to limit any conditions that could introduce bubbles under this cloth, they are practically impossible to get rid of even with the right tools, again probably would not be a large problem under vacuum.
CITY SLICKER
Reviewed in the United States on December 16, 2019
Used for interior panels on street rod worked out great able to form to roof and doors molded arm rest the works
Stanley bason
Reviewed in the United States on July 14, 2018
It does the job as it was advertised! Good price and received on time!Thank you
Sir Blabs a Lot
Reviewed in the United States on April 6, 2018
I used this in making a boat. It is still performing its function with no signs of failure. Thank goodness!
Kindle Customer
Reviewed in the United States on August 15, 2017
The product worked, but it was very difficult to wet out with the epoxy compared to other fiberglass cloth I have used. . This was true even with West System special coatings epoxy. There were also a few snags in the cloth as though it had been dragged over a sharp protrusion before being folded up. Perhaps it works better w/ polyester resin. I bought it due to it's price. I probably would go with another supplier in the future for epoxy work.
Nick
Reviewed in the United States on November 19, 2017
I've ordered 5 of this product over the past 9 months or so. The quality is consistent, but unfortunately that quality means the occasional run or weave issue. It is indeed difficult to wet out compared to higher quality cloth, but with some practice and adapting your technique to this cloth in particular, you can still get great results. I've found that using a combination of foam brushes and my fingers gives me top notch results. First I wet the surface, then lay the cloth and wet it with the foam brush - the foam comes in handy as you can "push" the epoxy into the weave. Now that the weave is fairly well secured to the surface, I follow up with dipping my finger in the epoxy or pouring it on the surface and rub it into the weave in a circular pattern.Even factoring in the wet-out difficulty and runs from the folded shipping, I still give this product 5 stars as it blows away anything else I've found as far as bang for your buck goes. If you're not using it for something that, if it fails, can cause severe injury then this is your cloth.
Adam probst
Reviewed in the United States on July 3, 2015
Purchased 6/26 arrived 7/2 and that was shipping from Florida to Montanta! Quality product identical to the product picture. Weave is perfect no loose fibers. I am using it on a boat restoration and it wets out easily with polyester resin.
ThunderGuns
Reviewed in the United States on October 28, 2015
This is a great product. Fiberglass cloth has tight weave and thicker than other fiberglass cloth I have used. I found slow hardener works well giving epoxy more of a chance to soak in to the fabric.
Recommended Products
$17.98
$ 7 .99 $7.99
$1,075.88
$ 99 .00 $99.00