Your cart is empty.
Your cart is empty.Fiberglass Cloth - 44 inch x 1 yard a woven fiberglass material suitable for all marine resins. Should be used for any repair or original construction where resin is used.
Colin Young
Reviewed in the United States on August 8, 2020
This feels like a stiff, heavy polyester sailcloth rather than a soft fabric that conforms to the shape it is draped over. "Plastic" is really the best term to describe what it feels like. Wets out okay, but doesn't end up glass-clear.Would be suitable for repairs or new work on a mostly flat surface where you are intending to paint or otherwise hide with an opaque surface treatment. If you are laminating wood or need something to conform to tighter curves (say around 1/2-inch radius or less, maybe 1/4 inch on the bias) you will be better served by finding cloth from a boat building supplier. I purchased from Amazon to save having to set up an account on another site. That decision, which I now regret, cost me the price of this product plus the half ounce of epoxy I wasted on the failed attempt to use it, because I ended up having to order the "good stuff" from one of those sites anyway. I'm not a fiberglass expert, but this isn't my first rodeo, and the intended project incorporates features that should have made it easier to fiberglass.The attached image shows a 35mm wide strip, fully saturated with SystemThree General Purpose epoxy and allowed to cure under it's own weight to give you an idea of just how stiff it is. I will probably end up using this to fabricate fittings, where transparency and appearance aren't the primary requirements.
The Pryors
Reviewed in the United States on February 29, 2020
Nice
joebro
Reviewed in the United States on November 30, 2020
Just like the title said i just needed more
Cheezymac
Reviewed in the United States on October 9, 2020
Worked well for repairing &reinforcement of poly tank
Weathermuffin
Reviewed in the United States on August 17, 2019
Used two layers of this on top of four layers of 24 oz cloth to complete the re-glassing of a 3 inch hole on my sailboat's cabin top. The photo is after fairing and sanding.
David
Reviewed in Canada on July 8, 2019
Is what it says.
Customer
Reviewed in the United States on June 21, 2019
Good product in floor reinforcement on my 17' Bayliner.
KC Jones
Reviewed in the United States on October 20, 2019
Worked great for my repair. Easy to cut, doesn't shred/fray like typical fiberglass 'matting'.
Customer
Reviewed in Canada on March 8, 2018
excelent
Hutch's NWMO Inc
Reviewed in the United States on July 27, 2017
Works fine, however to stop losing the loose strands of fiberglass around the edges, I took a small propane torch and heated the loose strand edges of the patches I cut before I put them in place. That kept the lose strands from going everywhere as you coated the fiberglass matting. Don't use a large flame, or you'll light fiberglass on fire though!!! Flame will melt the loose fuzz together..worked fine on cracks!!
Recommended Products
