Your cart is empty.
Your cart is empty.Product Fits the following sizes: 185/85R15; 185/80R15; 215/75R14; 225/70R14; 235/60R14; 255/55R15; 205R14; HR78-15; HR70-14; FR60-14; 7.50R14; 195/85R15; 195/80R15; 225/75R14; 235/70R14; 245/60R14; 215R14; JR78-15; GR70-15; GR60-15; 8.25R14; 205/80R15; 195/75R15; 205/70R15; 225/60R15; 225R14; LR78-15; HR70-15; HR60-15; 9.50R14; 215/80R15; 205/75R15; 215/70R15; 235/60R15; 185R15; 26x8.50R-14; 215/75R15; 225/70R15; 245/60R15; 195R15; 7.35R15; 235/70R15; 255/60R15; 215R15; 8.20R15; 8.55R15; 25 x 7.50R-15; 27 x 8.50R14 SAFETY WARNING: DISREGARDING THESE MOUNTING INSTRUCTIONS MAY RESULT IN EXPLOSION CAUSING SERIOUS INJURY, OR DEATH. ONLY SPECIALLY TRAINED PERSONS USING PROPER EQUIPMENT SHOULD SERVICE TIRES AND TUBES. 1. Insert the tube in the tire, making sure any valve offset is in the same direction as the offset of the valve hole in the rim. Partially inflate to ROUND OUT tube. 2. Lubricate the base of the tube and the insides and bases of the tire beads with suitable mounting lubricant (Never use anti-freeze, silicones or petroleum-based lubricants). When a flap is required, lubricate the rim side of the flap as well as the surface that will contact the tire. 3. Mount tire onto rim, completely install rings, and check for proper seating of components. 4. BEFORE FURTHER INFLATION, THE ENTIRE RIM/TIRE ASSEMBLY MUST BE PLACED IN A SAFETY CAGE, OR OTHER EQUIVALENT RESTRAINING DEVICE. ALWAYS STAND CLEAR OF ASSEMBLY WHILE INFLATING AND USE A REMOTE CONTROL INFLATION HOSE WITH AN IN-LINE GAGE AND CLIP-ON CHUCK. 5. NEVER EXCEED 40 PSI (35 PSI ON AGRICULTURAL TIRES) TO SEAT BEADS. IF THE BEADS DO NOT FULLY SEAT, DEFLATE THE ASSEMBLY, DEMOUNT THE TIRE, RELUBRICATE, AND REPEAT THE PROCESS. 6. After beads are fully seated, DEFLATE COMPLETELY to remove any buckles in the tube. Then reinflate to recommended operating pressure and thoroughly inspect for full and proper assembly BEFORE removing from the restraining device.
Raymond
Reviewed in the United States on March 26, 2023
Good to do business with
Brad
Reviewed in the United States on March 26, 2022
Installed in tire and aired up, came out next day and was flat. Aired up again, next day flat. Removed tube and aired up, remained inflated. Reinstalled, aired up... flat again in the morning. Threw it in the trash.
Alfred H Jensen
Reviewed in the United States on February 1, 2021
This is a component of my emergency kit for my Austin Healey 3000 Mk III.
Joe Jorgensen
Reviewed in the United States on August 12, 2020
Well made, would buy again
Customer
Reviewed in the United States on December 23, 2020
I learned about your inner tube from Alan Hendrix, Hendrix Wire Wheel, Greensboro, NC. He explained that most (if not all) other tubes have too large an inside diameter. When restrained by a tire, the tube buckles along the inside radius and develops a leak after running a while. I was having flat tires regularly with no puncture and with leaks on the inside of the tubes.
Customer
Reviewed in the United States on December 15, 2020
Holds air. Seems good.
Francisco
Reviewed in the United States on February 26, 2019
Buenas
Customer
Reviewed in the United States on February 23, 2019
Used this to repair a tractor tire. Extremely cheap quality! Leaked after 2 days. Thoroughly disappointing!
Recommended Products
