Your cart is empty.
Your cart is empty.
Please see gas fireplace compatibility list below for fitment questions. The FK24 is designed to work with gas fireplaces only. It is NOT intended to be used with Wood burning fireplaces.
✿Fits Majestic: 33XDV, 36XDV, 39XDV, 360DVS, 36CFDV, 33BDVR, 36BDVR, 39BDVR, 43BDVR, 33BDVT, 36BDVT, 39BDVT, 43BDVT, 36CDVX, 36CDVZ, A232, BC36, BC36i, BC42, BC42i, BHDR36, BHDT36, D232, DBR33, DBR36, DBR39, DBT33, DBT36, DBT39, 300DVB, 400DVB, 500DVB, 600DVB, 300DVBH, 400DVBH, DVB4136, DVR33, DVR36, DVR39, DVBR36, DVBR42, DVRT36, DVRT39, DVRT41, DVRT43, DVT36, DVT39, DVT43, DVTS2, DVRSL, DVRSR, FSUV, DV360, DV580, 33LDVR, 36LDVR, 39LDVR, 43LDVR, 33LDVT, 36LDVT, 39LDVT, 43LDVT, LHEC20, LHEC30, LHECDV20, LHECDV30, NV360, NV580, NVBC36, NVBC42, NVC36, NVC39, NVC43, RDV4136, RFS22, RFS32, RFS42, RFSDV22, RFSDV32, RFSDV42, RHE25, RHE32, RHE42, RHEDV25, RHEDV32, RHEDV42, RUVS32, TL36, TL42, UVC33, UVC36, UVC43, UVSRC36, UVSRC42, UVS33, UVS36, UVS43, UV33C, UVBC33, UVBC42, UVDC36, UVDC42
✿Fits Martin: CDVR33, CDVR36, CDVR42, CDVR47, CDVT33, CDVT36, CDVT42, CDVT47
✿Fits Northern Flame: A232, D232, DBR33, DBR36, DBR39, DBT33, DBT36, DBT39
✿Fits Temco: 36CDVR, 36CDVX, 33RDV, 36RDV, 39RDV, 33RDVD, 36RDVD, 39RDVD, 33TDV, 36TDV, 39TDV, 33TDVD, 36TDVD, 39TDVD, 41DV, VF36
✿Fits Vermont Castings: 33BDVR, 36BDVR, 39BDVR, 43BDVR, 33BDVT, 36BDVT, 39BDVT, 43BDVT, 33XDV, 36XDV, 39XDV, 36CFDV, 36CDVX, 36CDVZ, A232, BHDR36, BHDT36, CDVR33, CDVR36, CDVR42, CDVR47, CDVT33, CDVT36, CDVT42, CDVT47, D232, DBR33, DBR36, DBR39, DBT33, DBT36, DBT39, LHEC20, LHEC30, NV360, NV580, NVBC36, NVBC42, NVC36, NVC39, NVC43, 300DVB, 400DVB, 500DVB, 600DVB, 300DVBH, 400DVBH, DVB4136, DVR33, DVR36, DVR39, DVBR36, DVBR42, DVRT36, DVRT39, DVRT41, DVRT43, DVT36, DVT39, DVT43, DVTS2, DVRSL, DVRSR, RFS22, RFS32, RFS42, RFSDV22, RFSDV32, RFSDV42, RHE25, RHE32, RHE42, RHEDV25, RHEDV32, RHEDV42, RUVS32
✿Cross reference part #'s: 54103, Rotom HB-RB65, R7-RB65
north shore home
Reviewed in the United States on February 11, 2025
Wow! I own an Empire fireplace and the blower went out. My unit utilizes a magnetic attachment system for the blower unit and the rheostat. Also, the blower motor is on the opposite side of the blower unit than this replacement. After reading the reviews of this unit and after pricing a replacement at more than double the cost I decided to give this a try.I removed the magnets from the original unit and superglued them to this one. There was enough electrical cord to accommodate the motor being on the opposite side. When I ignited the fireplace I was disappointed that the motor didn’t start. Then I realized it is so much quieter than the original I didn’t hear it on low speed.The quality is excellent, it moves a lot of air, and it is amazingly quiet. Easy to install. Nice to purchase a product like this where people really made an effort to provide a quality product.
Jim
Reviewed in the United States on February 14, 2022
Pre wired, very easy to install. The quality of this assembly is far superior to others you find on line. While the cost is much higher than the low cost versions, it is still half the cost of the OEM and you have a reliable product that will last. Two comments - if it is not working at first, check the dial - it comes turned off - a small click turning the dial to the right puts the fan in the highest speed. Second, if you find you need to move the magnetic temperature sensor that is attached to a hotter location on the fire box - prior to moving it, you should first unplug the assembly from the outlet. The terminals are insulated, but you can still get a shock (ask me how I know). Last note - the dimensions are for the fan - the mounting plate is larger then what is shown. Overall - very well packaged, excellent product and perfect fit. Worth the additional cost.
David
Reviewed in the United States on December 22, 2019
Well, I am thoroughly impressed with this blower. It fit my Majestic 36BDVRRN PERFECTLY. Lined up with the studs present under the firebox including the fan speed control knob. Took about 5 minutes to install, and another 2-3 minutes to find the spot that heated up fastest to fire up the blower (right below the pilot light was warm to begin with, but maintained over 90°F, so it didn't turn off after testing). Right in the center seemed to be the best to allow for ample warm up, and shut off after about 10 minutes after turning the fire off.Literally a set it in, tighten the wingnuts, and plug it in operation. A little loud on high, but if you really needed the heat it would be a compromise that would be acceptable (or wanted to roast marshmallows inside 😋) and can be easily tuned down after the room is heated if that's what you are using it for. I just wanted to utilize more of the heat output of the fireplace versus just radiant heat, and it quickly heated the entire lower level, minus rooms with doors shut, of appx.1300 sq. ft. in a matter of minutes. I found about ~60% fan speed to kick out plenty of air to warm the room, without cooking yourself while lounging in front of it, and was barely louder than the white noise in the house already (kind of like an oscillating type fan in the summer set to medium).Great quality, real ball bearings for smooth, rattle free operation, and extremely happy with my purchase. When the already equipped blower on one of the other floors eventually fails, I will definitely replace with the appropriate model from this company.Thank you FirePlace Blowers Online for a great product!
Mike B.
Reviewed in the United States on February 16, 2016
I bought this from Amazon Warehouse deals, and it was in brand new condition and does not look like it was ever installed. I was able to knock the installation out in 20 mins, spent more time removing the lower louvers so I could slide the fan in place. It does move a lot air and makes a difference in our living room. But you have to wait until the fan kicks on, but like a few others said, waiting until the box gets to 120 seems to be a bit too high of a threshold, would like it better if it turned on sooner.This should be pretty obvious, but do not move the magnet while the unit is plugged in! There are exposed leads on the magnet that are live when the unit is plugged in and the knob is in the on position. I learned this through a shocking little lesson, and I don't want you to have to experience it as well.
Aaron Dwoskin
Reviewed in the United States on October 22, 2012
Great product, would buy again. Installed in about 5-10 minutes into the already existing support areas in the fireplace. No electrical knowledge is needed for install, and is secured with 4 wing nuts that screw on to the already existing screws that are installed from the factory. Very effective and dispersing heat, even at low speeds. The temp sensor, which is magnetically attached to the fire box bottom, triggers at 120 degrees F and shuts off at 90 degrees F, so it is pretty automatic. I do have to say that it takes some time for the fire place housing where the sensor sits to reach 120 degrees, but actually that's a good thing- would rather have warm air blow instead of cold air. Motor runs quiet at low speeds, but is a little louder at high speed, but not unreasonably, and within acceptable tolerances. I would buy this blower again, however, I think the price is a little too high. I would like to see the product sell for around 60-80 dollars, instead of the ~ $120 is sells for on Amazon. It should also be noted that this is an after-market blower, not the Majestic blower from the factory, but I don't think that there is or will be a difference.
Recommended Products
$86.88
$ 41 .99 $41.99