Your cart is empty.
Your cart is empty. The Rectangular Activity Table is a versatile option for school classrooms, corporate training centers and your home. Enhance collaborative learning by grouping tables together. It will accommodate children of all ages, from 1st grade to adult.
It features a 24"W x 48"L high pressure scratch, stain and warp resistant laminate top with a black edge band and 16 gauge tubular steel legs for increased stability. The top incorporates a protective underside backing sheet to prevent moisture absorption and warping. An attractive black powder coated finish protects the upper legs from scratches and height adjustable chrome lower legs give you the flexibility to raise or lower the table a full 9" in 1" increments. Casters allow you to easily move the table around and then lock into place.
This activity table provides a durable work surface for anything from computer labs to project meetings to laying out fabric in your sewing room.
Margaux
Reviewed in the United States on August 3, 2019
I ordered this table because I wanted an adjustable hight rolling desk for my living room, and fortunately this table is likely to suit my needs. Based on the other reviews, I think I'll be satisfied, but will make adjustments. Right now, I am in the middle of assembly. I wasn't able to set it up right away, and during unpacking found that the table top was damaged and one of the leg plates was bent where it fits into the bracket that go into the bottom of the table. It's possible that the tabletop could have been damaged at my house, but highly unlikely, and the bent leg plate would not have been possible. Also, the instructions are for a different table, and include information about installing a support bar for a table that folds in the middle (which mine does not). All in all, it would be too much hassle to return the table, and a couple of dings and dents won't stop it from being a good rolling desk in an active household with lots of pets. However, if you want a perfect product, or if you're unwilling to make do with some repairs, this table may not be for you. Otherwise, the casters are exactly what I wanted and appear to be sturdy. Outside of the damage, this table appears to be a good solution for what I needed.
Rich Gulden
Reviewed in the United States on May 14, 2018
Great for office printers!
Customer
Reviewed in the United States on February 3, 2018
It's a good, sturdy table, though the edges are a bit sharp, oddly enough. The best feature is you can adjust the height.
J. Esteban
Reviewed in the United States on December 2, 2018
I have my laptop on one and a sewing machine on another. The while and locks are still working after the better part of a year.
fulmin8r
Reviewed in the United States on July 12, 2016
This is a very good sturdy table. BUT! do not start to assemble this table according to the instructions. This arrives in two packages. The top is alone, and the hardware is separate. I was surprised to find that you actually don't have to order the wood finish or the gray, rather you choose which side you prefer when it arrives because one side is the gray and the other is the wood. When it arrives, there are stickers in the corners of the top which tell you "where" to place the hardware. At first glance these stickers appear to be placed exactly where you should mount the hardware. BIG MISTAKE! don't believe it!!! I mounted the first corner bracket according to one of the stickers, and I used a ruler to try to make as square in the corner as reasonably possible. When I was aligning the second corner bracket GUESS WHAT! the sticker was a different distance from the edges. Being as precise as I like to be, I just decided to use the measurements from the first one so I would have a "balanced" table. I temporarily mounted the legs when I found that the plate of one of the lets was bent. (The box had arrived damage, but I didn't notice it when I unpacked it.) After gently repairing the damage with a hammer, I set the table upright before securing the legs, just to be sure they were going to fit properly. I tried putting our kids up to the table with their chairs and found that the legs were too close for chairs to go under the ends. This is where reengineering began. I disassembled it all, and then grabbed a square and a sharpie and marked the corners where I really wanted the legs. I mounted the corner brackets and discovered that the corners of the top were not so square. I went ahead and reassembled it as reasonable as possible. As I said at the start, this is a very sturdy table and will fit our needs well. Just beware before you start screwing holes in it that you will want to measure and locate the brackets in a reasonable spot and DO NOT use the stickers as a guide. The "changlish" title is because of the wonderful lack of grammar in the instructions. My kids and I always find humor in these.
cyndy bourke
Reviewed in the United States on September 6, 2015
Perfect.
CYBER1
Reviewed in the United States on July 19, 2015
Excellent quality, very solid table. It is good for the industrial workshop, school, computer lab, craft and play room. Its 24" width makes it appropriate for bench or single person workstation and office chair, however it could be also used for up to 2 children under 12 on stools with the legs at its lowest setting. Formica type laminate on both top and bottom surface. One side is wood grain, the other a solid (mine is grey). Legs come disassembled. They are easy to install if you have a strong power driver with 1/8 drill bit and phillips screw head. Installed legs in about 10 minutes. There are template guide stickers applied to where the legs mount however no pre drilled pilot holes. I believe this is smart so the top surface selection can be chosen buy the user.
Recommended Products
