Your cart is empty.
Your cart is empty.Spark Plug Wire Set, Ford Racing, Spiral Core, 9 mm, Black, 45 Degree Plug Boots, HEI Style Terminal, Ford V6 / V8, Kit
Tommy Teague
Reviewed in the United States on May 9, 2025
Very nice set of spark plugs wires. I used them on the 351W in my '56 F-100 with a HEI distributor. They are plenty long enough to run them any way you like and look great when installed. The only issue I had was that the boots fit very tightly on the wires, and are difficult to install. They recommend silicon spray or hand soap as a lubricant as they would be nearly impossible to install without it. I tried soap which helped, but found that silicon grease worked better, but it was still difficult. Otherwise, very nice and highly recommended. Do yourself a favor and buy or borrow a good crimping/stripping tool. It would be difficult to install the terminals without one.
Ryan Cahill
Reviewed in the United States on January 28, 2025
What more do you need to know. They’re awesome. Had a set last ten years and all but two are still good. These are numbered and have the 45 degree boot on one end, but you will need to know how to crimp terminals and install boots for the other end.
Ercans
Reviewed in the United States on October 10, 2023
Everything was included in the kit. Quality is as expected from Ford Racing products.Wd40 worked great as lubricant to slide on the boots before crimping. Would recommend this set.
R1der
Reviewed in the United States on May 20, 2022
Good quality. The boot fit great/tight but you'll need some dielectric grease or lube to aid assembly.
Eric Steen
Reviewed in the United States on February 14, 2021
I ordered this set to be able to custom fit to my application, but I received the pre-terminated set (M-12259-M301). Because of time constraints I used them. Would have liked the universal set, but I had to make these work. The quality is great otherwise.
Tim McD
Reviewed in the United States on December 28, 2020
Awesome quality set of wires for my 302. I also bought a set of cheap crimpers on Amazon that were spec'd out to only do 8.5mm wires. I was able to lightly squeeze the wire ends just a bit to be able to crimp them properly. Great quality wires, boots and connectors.
PapaSam
Reviewed in the United States on April 11, 2020
Be very careful when installing these..if your engine is running, they can shock the crap out of you.
Neil
Reviewed in Canada on September 16, 2019
Very beefy and good quality
Steve B.
Reviewed in Canada on February 26, 2019
Arrived on time. Package was a little beat up but contents were fine. High quality components. Was able to cut each wire to the length I needed - routed the wires along and around the valve covers, not over. Once the distributor end connector is crimped on it takes a fair bit of effort to get the boot over the top but that was the only difficult part.
Canadian liberty
Reviewed in Canada on November 5, 2019
Beautiful pieces of equipment exactly what I was looking for
Alex
Reviewed in the United States on June 9, 2018
Good product good price, just remember you’ll have to measure and cut the wires to size, along with crimping the ends on.
Recommended Products
