Your cart is empty.
Your cart is empty.Product Description
Fowler Vernier Micrometer has a choice of measuring range from 0 to 6 inches with a flat anvil/spindle pair with a 0.256-inch diameter measuring face for general purpose measuring. The vernier scale on the thimble and sleeve red to .0001". The positive locking nut on spindle locks measurements in place when required and the zero adjustment on the sleeve ensures accurate measurements. The ratchet-stop thimble can be used independently of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometers: outside, inside, and depth. Outside micrometers may also be called micrometer calipers and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Fowler, an American company, manufactures premium inspection and measurement instruments like electronic indicators, calipers, bore gages, and micrometers. The company, founded in 1946, is headquartered in Newton, MA.
From the Manufacturer
Fowler's Swiss Style micrometers are made exclusively for Fowler. A great value--they offer the same fine features and quality that you expect from comparable tools at a fraction of the cost. It's designed with a unique friction, which allows a one hand operation. This Friction/Ratchet thimble assures you of consistent readings at all times. Barrel, thimble and frame are satin chrome finished; micro-fine graduations allow easy reading. This outside inch micrometer set is included in a fitted case. Also a wrench is included, permitting quick and easy zero adjustments on sleeve. Special care in design and workmanship create a long lasting precision tool.
Marvin Orellana
Reviewed in the United States on September 8, 2023
Accuracy is good even if you work with tenths, all the black plastic locking clamps will break within a month of use! And they don't sell spare clamps.
Christina Gene Boyer
Reviewed in the United States on July 11, 2023
Very decent micrometer set. Not quite what I used for decades in my professional life but certainly adequate for my retired home shop use. I purchased and returned a lower priced set as they were no better and maybe worse than just using a decent dial caliper. I need these for tenths measurements when machining press fits and bearing fits. After inspecting and zeroing this set looks like it's up to task.
Anon-e-mouse
Reviewed in the United States on April 22, 2023
No good micrometer is cheap. These are a great value for the accuracy they give. I wouldn't assemble anything going to space with these. But these will still measure anything with a very good level of accuracy. They do a fine job measuring tensile samples and car parts.
M_GadgetGeek
Reviewed in the United States on May 9, 2021
A good value for the price. Easy to read numbers, even better than some other brands. Excellent accuracy, and arrived within a couple tenths. I was able to calibrate them very quickly. My main concern is that the locking levers are plastic. A metal lever would be more durable. Overall though, still well worth the money.
Monique
Reviewed in Canada on November 13, 2021
It's one of the time where you get what you paid for. This is your average harbor freight, mastercraft quality. All 4 micrometers feels plastic ABS on the locking lever, ratchet thimble,etc.The 1 inch calibration rod is definitely off, by 0.0002 oversized, measured with a backup mitutoyo and starret.The 2 inch calibration rod seems to be off also and the fowler 1-2 & 2-3" mics fall within the category. So you can't really be sure if it's the mic, the rod or actually both that are required to calibrate.The 3 inch calibration rod show promise somewhat, at least the 3-4" hit on the money or is it?Anyways, micrometer 2-3" & 3-4" have burrs and sharp edge on the body frame have some sort of stain all over them.In all thimble ratchet, there's loose play which is not desirable.The foam packing is horrible and all micrometers are hitting each other during the shipping and transport.Plastic case for micrometers is damaged.There's no certificate of inspection or quality control approval.The only pro for the product, is the price for a set of 4 and the very low torque required to turn the micrometer spindle which is surprisingly light and smooth, even lighter than my starret or mitutoyo.I bought the product because I will need a general tool set for quick job and handling to co-worker and student so I won't have to worry much.I am still debating whether to keep it, or return it because of overall poor quality.
GodsChildUPC
Reviewed in the United States on April 1, 2021
As a full time machinst. I wanted my own sets besides the shop sets. We have Mitutoyo and use the standards off them to check the accuracy on these Fowler mics and they are dead on. Had to fine tune them once I pulled them out the box but that's no big. The standards from the Fowler's are accurate after measuring them with the Mitutoyo micrometers. The micrometers feel nice n heavy which means they are made of soild material. I read the previous reviews and those negative reviews I don't think them dudes are real Machinist. The plastic grip, thimble grip and plastic lock is no big I kinda like it. You gotta think, these aren't C-clamps. The are a measuring instrument and they are meant to be taken good good care of. I give them a 8 star if I could.
Home Brew
Reviewed in Canada on March 23, 2020
I would rate these as a 5, but some of them came needing to be adjusted. Not enough that I bothered actually doing the adjustments, but a few tenths off.Case is good, feel is good, repeatability is good.This is the only set of these that I have owned, so take the above with a grain of salt.I also noticed that there was a fairly large thermo expansion / contraction rate ... I forget the numbers, but you will want to make sure that you do not make the mistake of checking something while the tool is too hot or too cold. (or hot for one measurement and cold for the next) I know this is machining 101 ... Just thought I should say it anyway.
Justin Boydell
Reviewed in Canada on August 13, 2019
Very happy with my purchase
Mark Trenholm
Reviewed in Canada on December 12, 2019
Good product
Ghislain
Reviewed in Canada on November 16, 2019
Quality product
M. S.
Reviewed in the United States on February 16, 2018
Very good quality, just like Mitutoyo, at a fraction of price. Highly accurate
Erik
Reviewed in the United States on February 23, 2017
Awesome set of mics! I am pretty impressed with the quality of Fowler products considering the price compared to other brands. I wish I would have got this set of mics years ago.
Matt
Reviewed in the United States on October 20, 2016
For the price these are fantastic. If I'd had more to spend I could have gotten better, but while these don't have a feel that inspires total confidence they do give consistent readings. I've been using these as a student for a little over a year, and the 0-1 is occasionally a little sticky feeling and requires a few extra turns on the friction thimble to actually give a confident reading. This may just be a cleanliness issue, however, because I also use these when checking dimensions during grinding. I lack the experience to be certain that it's the tool and not my [mis/ab?]use of it.I still think I'll buy some nicer ones once I have the money, however. These are serviceable, not deluxe.
Recommended Products
$69.99
$ 31 .99 $31.99
$253.85
$ 99 .00 $99.00
$111.32
$ 51 .99 $51.99