Your cart is empty.
Your cart is empty. Description:
Brand: Flycolor
Model: Francy
Continuous current: 50A
Instantaneous current (10S): 50A
BEC: 5V/3A, 12V/2A
Number of lithium batteries: 5V/3A: 3-6S; 12V/2A: 4-6S(Not included)
Size: 33x16x10mm
Weight (including wire): 16.5g
Features:
High performance MCU/modular BEC/all Dshot and Proshot signals are supported
Small size and light weight, support higher KV motor and more power load
ARM 32-bit Cortex MCU, frequency up to 64 MHZ, 25% higher than the previous generation of MCU
Supports regular 1-2ms pulse width input, as well as Oneshot125(125-250us),
Oneshot42(41.7-83.3us) and multshot(5-25us). the input signal is automatically detected by the ESC upon power up.
Motor timing can be set between approximately 1° and approximately 31° in approximately 1°increments(actual accurate values here are 15/16ths of a degree)
The firmware can be updated by setting the ESC parameters through the BLHeli-32 software, up to twenty parameters can be set with strong adaptability
Package included:
1pc 50A ESC
Charles
Reviewed in the United States on January 5, 2025
I can't change the timing or motor direction of this esc using the BL_heli_s suite due to BL_heli shutting down making firmware updates impossible, and the message states it's a 'preproduction / beta' firmware, so it won't let me change anything at all.
Sefff
Reviewed in the United States on January 24, 2025
Unable to re write simple settings on esc because it has some bs prototype firmware that you can't do anything with.
Joe
Reviewed in the United States on April 10, 2025
Never worked to bad for me I tried it pass 30 days
Raul Odin
Reviewed in the United States on February 25, 2024
I al using this ESC in a smaller, 4S EDF jet, and it works flawlessly! It's tiny size makes it possible to place it just about anywhere, and the programming capabilities are 2nd to none! If you want and need top performance, abundant programming capabilities and tiny, super light ESC, look no further - this is the ESC you've been searching for.
Walter Schutz
Reviewed in the United States on December 12, 2024
I got one with pre-production firmware, meaning I can't change any settings or upgrade firmware. This ESC simply won't work with some motors if you cannot change the timing so It's honestly useless to me.
Joshua Kubiak
Reviewed in the United States on January 3, 2024
image is misleading. does not come with presoldered xt60 or bullet connector. Later orders did come with soldered connectors; however, the BLHELI32 firmware is not usable since it is a prototype sample
Dreamers
Reviewed in Canada on December 6, 2023
REAL BlHeli, customizable in app. Works great. Didnt even need to calibrate. Firmware is the most recent. Very impressed by FLYCOLOR. So lightweight and small. im very happy with these. i bought 3. i will buy another 3 when i go for my next build. These are great. Dshot1200 too come on now.
Recommended Products
$124.95
$ 58 .99 $58.99