Your cart is empty.
Your cart is empty.
Description:
- Powder coated gloss black for a brilliant and durable finish.
- Adjustable Heavy Duty Carbon Steel Track (Panhard) Bar and Relocator Bracket
- Tubular Design with Self-Lubricating Bushings for Easy Maintenance, Stability & Strength.
- Relocator Bracket also made from Heavy Duty Carbon Steel.
- Ensures Proper Axle Location & Performance with Track Bar Relocator Bracket
- Reduces, in most cases eliminates, "Death Wobble" (Axle Shake)
- Most Drivers experience an Increase of Steering Comfort
- Compatible with most aftermarket lift kits
- Easy 100% bolt in installation with the use of basic hand tools. No cutting or welding is required.
Installation instructions:
1. Remove stock track bar. Using an socket remove the passenger’s side bolt
On the driver’s side mount you will need to remove the cotter pin. Then using a wrench, loosen and remove the castle nut. Finally using a joint fork pry the track bar away from the frame mount.
2. You should be able to remove the track bar now. Using a bristle brush, clean out the inside of the driver’s side track bar mount. As well, clean the lower face around the hole. Clean the outside frame rail where the retrofit bracket will mount.
3. Align the support brackets and take the fork of the pan-har rod as a reference. Be careful not to make the right or wrong direction. Install the nuts one by one and tighten them.
4. Locate the existing hole just below the ground strap. Drill bit and thru drill this hole to through the other side of the frame.
The drill hole must be level. Once through, deburr the exit hole. Mounting nut.
5.Fix the brake line.
6.Adjust the track bar to a suitable length, and fix the nut.
Jarrod j.
Reviewed in the United States on August 30, 2024
It doesn’t come with any instructions
Recommended Products
$93.87
$ 36 .99 $36.99
$95.99
$ 41 .99 $41.99