Your cart is empty.
Your cart is empty.Product Description
KTM
Reviewed in the United States on May 9, 2025
Price aside, there's a lot to like about this respirator mask.The mask feels like a silicone type material, and the fit is comfortable. It seals well around the nose, chin and cheeks. There is no noticeable odor.The included filter cartridges are easy to install and the included pre-filters will enhance filtration and extend the life of the cartridges.Once the mask is in place, it's easy to adjust the elastic straps as they are right in front. I found this convenient but needed to tuck the excess strap on each side in so they didn't obscure your vision or be a distraction.Breathing through the mask is effortless, so much so I had to check the flapper valve to be sure it was working - and it was.Cost shouldn't be a deciding factor when buying a protective device, and it doesn't need to be as the cost is really quite reasonable considering it's a full mask set, with the mask, cartridges and pre-filters all included.
Domestic Goddess
Reviewed in the United States on May 8, 2025
As soon as we opened the box, we were seriously impressed with the quality of the KAGIKA Full Face Respirator Mask. It feels durable and well-made—definitely not one of those flimsy, cheap-feeling masks. Then we realized it *also* came with filters, which was an unexpected bonus!We originally got it for cutting and remodeling projects (hello, sawdust), but now we’re probably going to order a couple more—because somehow, it turned into a battle over who gets to wear it. My husband and I both love it, and it makes a huge difference when working in dusty environments.Highly recommend if you’re doing any kind of messy work and want something comfortable and built to last.
Carpe Diem
Reviewed in the United States on May 5, 2025
Look, I wouldn't run into a chemical plant wearing this thing, but for sanding, painting, or trying to avoid becoming one with drywall dust—it does the job. The seal is solid, the filters are easy to swap, and it didn’t smell like cheap plastic out of the box (you know the one).Setup took about as long as convincing my dog it wasn’t a chew toy. Comfort-wise? It’s not spa-day luxury, but it’s wearable for a good stretch of work. The trapezoid filter design does keep neck fatigue down, and the whole thing feels more “value-priced protector” than “bargain bin regret.”Bottom line: It’s not a military-grade gas mask (despite the bold title), but it’s a solid step up from disposable paper masks—and way cheaper than most name-brand options. If you’re DIY-ing, sanding, spraying, or just avoiding funky fumes, this one’s worth a look.
Range Finder
Reviewed in the United States on May 23, 2025
The comfort isn't better or worse than my 3M mask and the filters appear to be compatible as well. I didn't notice any fumes while face deep in wood shavings and I do get a little smell with the IPA during my work with resin, but most of the smell I noticed is mainly from the mask. It is fully functional, but adjusting the straps can be a little finicky, however, they are one and done.
Matt Sullivan
Reviewed in the United States on May 12, 2025
This mask fits fine and is totally air tight
Shroomhunter
Reviewed in the United States on May 12, 2025
This came quickly, and everything was there. This does not come with the face shield. Everything attaches just fine, and it has several replacement filters. The straps are easy to adjust. I'm working with resin, and cannot detect odor when using. I'm switching from another, more expensive brand, and so far the quality is equal. I'll use it and report back on whether the straps hold up long term. So far, it's a decent mask for the price.
Ryan
Reviewed in the United States on May 1, 2025
For 15 bucks, this thing is great! It uses standard 6001 filters, it includes a few in the box, and the mask itself makes a tight seal. Its a disposable mask, I think the clasp where the straps clip to the mask will be the first thing to break, but this is very affordable compared to other options.I dont usually have a hard time getting a seal with masks off the shelf, but this one also sealed just fine. This is about $10 cheaper than whats available for me locally and even cheaper than the "commercial" stuff.I have no way of verifying the quality of the included filters but I sanded a bunch of drywall while wearing it and didnt have any dust make it inside the mask.
RealReviewsBYTruGeek
Reviewed in the United States on April 27, 2025
This respirator works great for sanding drywall, where the powder is so fine, I'm sure I would have breathed them into my lungs had I not used this respirator. It does get hot after a while and fogs up my glasses, but it is well worth the discomfort considering the alternatives. I might buy a full face shield to solve the fogging issue, but this respirators is definitely staying on my face from now on. I really like the interchangeable cartridge design and well buy one designed for chemical fumes next when I do some furniture refinishing. This is one of those items I wish was widely available when I was young, but now that it is on Amazon at a very reasonable price of under $13. there is no reason for anyone to keep breathing in dangerous stuff.
Recommended Products
$258.95
$ 99 .00 $99.00