Features:

• 1. Adopt the Direct Digital Synthesizer (DDS) technology and provide stable, precise, pure and low distortion signals.
• 2. 2.4 inch TFT Color LCD with 320x240 resolution, displaying parameters and graphics of the two channels at the same time.
• 3. The instrument uses 14-bit high-speed D/Aconverterchip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution.
• 4. Can output up to 97 groups of functions / arbitrary waveform, contains 33 groups of preset waveforms and 64 groups of user-defined waveforms.Preset waveforms:Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp,CMOS(0~10V), Four channels TTL, Exponential Rise, Exponential Fall, Noise, ECG, DC etc.
• 5. Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192points* 14bits;
• 6. Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations.
• 7. Sweep Function: It can sweep 4 properties of signals including frequency, amplitude, offset and duty cycle;It has Linear and Logarithm two sweep types; 0.01S~999.99S sweep time;Up, Down and roundtrip sweep directions.
• 8. VCO Function(Voltage Control Output):Can be achieved by an external input signal: voltage controlling frequency, voltage controlling amplitude, voltage controlling offset, voltage controlling duty cycle and PWM modulations.
• 9. Burst Output Function: There has Manual Trigger, internal CH2 Trigger, and External Trigger for your options. It can output1~1048575 pulse trains.
• 10. 100M Frequency meter function: It can measure frequency, period, pulse width and duty cycle. Max. frequency workable is 100MHz and Min. frequency workable is 0.01 Hz.
• 11. Counter Function: It has 2 coupling measure modes including DC coupling and AC coupling. This design can solve inaccuracy problem of AC coupling.
• 12. Standard dual full functional channels which are equivalent to two independent generators.
• 13. Channel SYNC Function:Support waveform copy and state copy between channels.
• 14. Support two or more signal generators connected to achieve multi-channel output, the maximum support 16-channel synchronous output, the phase between each channel can be adjusted.
• 15. Precisely adjust the phases of the two channels,Precision can be 0.1°.
• 16. Minimum amplitude resolution can be up to 1 mV.Amplitude range is 0~20Vpp.
• 17. Duty-cycle of each channel can be adjusted independently0.1%-99.9%, the adjusting resolution is 0.1%.
• 18. -10V~+10V DC Offset function. Resolution 0.01V.
• 19. Save function:It can save 20 sets user-set parameters and can be loaded at anytime.
• 20. Communicating function: All functions can be controlled by PC program and the communication protocol is open for secondary development.
• 21. Output short-circuit protection: All channels can work more than 60 seconds when the load is short-circuited.
• 22. Provide powerful waveform editing PC software. Users can download arbitrary waveform to this instrument after edit through PC program which is included in user CD.
• 23. Adopt ABS plastic shell with table type design. Use 100-240V (AC) wide range voltage power supply.
• 24. Can choose our FYA2000S series or FPA1000 series power amplifier to output 20W~100W signal in DC-10MHz width without any distortion.