Your cart is empty.
Your cart is empty.Cable tie push mounts are designed to easily mount bundled harnesses directly to a chassis or panel. Simply push the push mount tab into a pre-drilled hole and the tab locks in place. Provide an easy solution to securing cables and staying organized with cable tie push mounts.
Don Franzen
Reviewed in the United States on August 5, 2023
Good product.
Dave M
Reviewed in the United States on November 28, 2023
Works as described, it save me from having to purchase a large quantity when I only needed 1.
JnzWorld
Reviewed in the United States on July 24, 2022
This totally works for my project.
Eric
Reviewed in Canada on June 18, 2022
What I like best about these clips is you can use any length zip tie with them. There are reusable. Just remove the zip tie and leave the clip in the original spot and install a new zip tie.
ابراهيم عسيري
Reviewed in Saudi Arabia on December 4, 2022
عملي
Larry Daley
Reviewed in Canada on December 26, 2022
Very brittle break easily
D. Lucero
Reviewed in the United States on March 23, 2021
These are good only smaller than I expected
Nelson R.
Reviewed in Canada on July 6, 2020
as expected
JAMES L.
Reviewed in the United States on March 19, 2020
These work great for securing wire bundles, tubing. Drill a 1/4" hole, push this holder in place and zip tie.
Ford Sparkee
Reviewed in the United States on December 29, 2020
FOSHIZZLE!!! These are freaking awesome. Great for nailing down wire looms in an engine bay. If it cant move, it wont rub thru. And believe me, I’ve see MANY a problem from wiring not properly secured.
Michael Lewis
Reviewed in the United States on August 22, 2019
On the package: GB 45-PMBUVB push lock base cable tie mounting base, fits 1/4" holes. "UV" 5/16" X 9/16" mounting base to secure cable tie bundle to another surface. UPC032076915353. Made in USA 10 pieces in the package.Dimensions of each piece: overall height 11/16", 3/16" deep, 9/16" wide. When installed the tab will extend a little less that 3/8" of an inch under your panel(1/4" max panel thickness), height above mounted surface: 1/4". Depth/width at mounting point 3/16" x 3/8", exposed tab width approx 5/8" when flat. Open prong width (below panel) 3/16". Maximum cable tie width 3/16" x 1/16" thick.Very nice relatively low profile mounting base for a zip tie, not too squishy and apparently UV resistant if I'm interpreting the "UV" on the front of the package correctly.
Customer
Reviewed in Canada on August 17, 2018
Good zip ties. Work well and as described.
christie narez
Reviewed in the United States on July 6, 2018
These popped right in the hole left when I removed strap to the car frame. You need your own wire tie to stick through it and worked like a charm since you can decide how long of a tie to use.
Recommended Products
$11.79
$ 5 .99 $5.99