Your cart is empty.
Your cart is empty.Product Description
Product Description
This is brushless dc cooling fan, containing long life dual ball bearings and pure copper coil, the fans can be run continuously for 50,000 hours and be mounted in any direction. The fan's frame and blades are constructed of PBT plastic which have a high resistance to flammability. Operating Temperature: 14℉ to 167 ℉
The operating voltage is 7 to 13.5V DC, 2-Pin Connector with 300mm (11.81 inch) leadwire. Includes a 120mm metal fan guard and mounting screw set. All GDSTIME fans are certified by CE and RoHS.
Axial Series
This 120mm ball bearing fan is designed for various projects that requires cooling or ventilation; or as a replacement fan for many products on the market. Such as ice makers, PSU power supply , inverter/charger, rv fridge, quartz heater, LED grow light, solar panel and so on.
GDA1225 Axial Fan
Here are Further Specifications
Total Dimensions: 4.72 x 4.72 x 0.98 in. (120 x 120 x 25 mm)
Hole to Hole Distance: 4.13 x 4.13 in. (105 x 105 mm)
Screw Hole Size: Ø 0.17 in. (Ø 4.3 mm)
Product Technical Parameters
Airflow: 83.2 CFM | Noise: 35.7 dBA | Speed: 2500 RPM
Voltage: 12V | Power: 3.5 W | Current: 0.25 A
Static Pressure: 0.18 In H2O
Fan Bearings: Dual Ball
Life Expectency: 50,000 Hours
What's in the Box
- 1* 120x120x25mm cooling fan
- 1* 120mm metal fan guard
- 4* Mounting screw and nuts
Key Features
Enhanced Fan Fame
Enhanced frame structure, reducing turbulent flow noise increase efficiency. PBT plastic impeller meets UL 94 flammability standards.
Dual Ball Motors
Dual-ball bearings rated at up to 50,000 hours allows the fans to be mounted flat or upright. Impedance protected motors have a high resistance to heat.
2-Pin Connector
Make sure positive"+"(red wire) and negative "-" (black wire) poles are in the right places; exchange the red and black wires in the connector if their position is different from your old fan.
Fully Protection
Metal fan guard on the fan can protect your fingers from injury, and prevent the fan wire from getting involved in the fan blades.
PAFreedom
Reviewed in the United States on May 4, 2025
Bought this to replace an 80mm fan that stopped working in my wine cooler. Was looking for something that was a little more robust. The connector on this fan didn’t not match the old one so I had to cut it off the old one and splice it onto this one. It works but wish there was an easier way. Compared to the old fan, this one is noisy! This is rated at 43dB vs 25dB for the other. Although I’m happy with its performance and robustness I might have to suck it up and get a quieter fan. We’ll see how it goes.
J. McNevin
Reviewed in the United States on May 27, 2025
This fan had gunk on the blades and doesnt list "ball bearing" anywhere on it. It took me a day of troubleshooting my system to figure out that it was defective and barely turned. I plugged in a replacement which worked right away. Don't buy this, it wont work
Joe
Reviewed in the United States on May 20, 2025
Fit perfectly to replace the unit in my wine fridge, didn't fix the issue though.
J. Meyers
Reviewed in the United States on May 2, 2025
After several years, the cooling fan on my Opal 2.0 ice maker wasn't working well, leading to the machine getting very hot and not making ice. (The fan would either get stuck trying to spin up, or didn't spin as fast as it should.) I replaced it with this fan, and my ice machine is working much better. The fan itself fit was the same size as the OEM fan, so it fit in fine in the case. The power plug on this fan is a bit different than the plug on the original (the clips are different), and I had to shave a bit off the new plug to get it to fit in the power socket. It isn't possible to clip in this way, but friction should hold it in, and there shouldn't be anything pulling on the cord, anyway. I'm ecstatic that I fixed my Opal for about $13.
Rita
Reviewed in the United States on May 1, 2025
Works
Cassie cheeky
Reviewed in the United States on March 9, 2025
Replacement fan is a perfect fit with a little modification. Just need to drill four holes for NEW fan.
coastal
Reviewed in the United States on March 22, 2025
Claimed to run at 43 decibels, actual is 72 decibels. Couldn’t use, too loud.Edit: The seller reached out to me, and offered a full refund. The fan wasn’t suitable for me, but I would certainly buy from this seller again
Rico
Reviewed in the United States on February 2, 2025
Bought this to replace a fan in my heater because I could not find the exact replacement nor did the manufacturer have any in stock. This works great, quiet, and air flow might be a little more. If you have one of these heaters and need a new fan, this works!
Ellen Cantwell
Reviewed in Canada on July 21, 2022
Quiet and works exactly like the original as a replacement cooling fan in my Xantrex Freedom 458 RV Inverter/Charger .
Claude Langlois
Reviewed in Canada on November 18, 2020
Un peut bruyant mais il fait bien son travail, reste a voir a long terme. Très peux gourmand en énergie. Il va me servir au transfert de chaleur en hivers dans mon entrepôt de batterie de systèmes solaires.
Recommended Products