Your cart is empty.
Your cart is empty.GM Genuine Parts Engine Oil Pressure Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Frydaddy
Reviewed in the United States on January 5, 2025
Seems to be doing it's job was getting erratic pressure readings and now seems stable at cold idle I am running about 55 psi and warm idle 35 psi. Just a little tip. I used a 27 mm 12 pt. deep well socket ( a 1 1/16 12 pt. socket in deep well will also work) to remove the old one. I ended up breaking the plastic housing on the old pressure switch while removing it. I bought a cheap 27 mm 12 pt. boxed end wrench and cut it in half to use while installing the new switch. It did a nice job of putting the pressure on the head of it and not the plastic body.
Nathaniel W. Jones
Reviewed in the United States on January 25, 2025
Worked fine on my 1999 4.3 S-10. Need a 12pt 27mm or 1 1/16 socket for install. Also need to pull the distributor for access, but that isn't very hard. The plastic had failed on my old one and it was leaking oil.
Shayne Voris
Reviewed in the United States on August 25, 2024
Glad I went genuine on this one. It wasn't really much more $$ than aftermarket.Used the Lisle specialty socket to remove the old sensor and install this one. Took Glad to know for sure that I do, in fact, have good oil pressure, and that my previous low readings were just from the old sensor.
Customer
Reviewed in the United States on July 5, 2024
This is the single pin transducer/sensor, exact fit (there is a 3-pin type also)
SANDRA M TOMAN
Reviewed in the United States on July 30, 2024
Working good and it is accurate,had got a new Standard PS230 , It was in for 3 days , at idle was reading 17 psi so I tested it with a manual gauge and was running 37 , got the new GM part and all is good 36 psi AT idle the Standard is junk
Gary
Reviewed in the United States on March 15, 2024
i have tried them alL with this oem product you cant go wrong 'its well worth the couple extra dollars to get a quality part that will last, don't by aftermarket they fail always!!! s and when dealing with the oil that protectsyour engine don't mess around (THE ONLY SOCKET THATS WORKS ON ALL OIL SWITHCS LISLE (13250)
The Garbage Man
Reviewed in the United States on December 2, 2024
No leaks so far.
Charlie
Reviewed in the United States on May 22, 2023
Fit well,right part. Nothing else to say.
Customer
Reviewed in Canada on July 6, 2022
Second one was perfect
Canitos1
Reviewed in Mexico on December 1, 2021
Original el censor y quedó bien.! Y funcionando perfecto!
less talk
Reviewed in Canada on November 24, 2020
Old one was leaking at the top, not easy to get to but with the correct "special socket" doable. I prefer to use OEM in this instance and hope to get another 15 years servive out of it.
Recommended Products
$40.95
$ 19 .99 $19.99