Your cart is empty.
Your cart is empty. Glarks 220Pcs 22-16/16-14/14-12/12-10 awg gauge non-insulated butt connectors seamless uninsulated electrical wire ferrule cable crimp terminal assortment kit
Specification:
Material: Made of red copper
Color: Sliver
Size: 22-16AWG, 16-14AWG, 14-12AWG, 12-10AWG
Feature:
♛ Copper material. has good electrical conductivity.
♛ Tin plated on the surface, with anti-oxidation and corrosion resistance.
♛ Non-insulated and with wire stop barrier on center makes very simple to splicing.
♛ With good function and use for building custom wire harnesses or making repairs to existing wiring.
Package Detail:
22-16AWG(0.5-1.5MM²) ------ BN1.25 ------ 80pcs
16-14AWG(1.5-2.5MM²) ------- BN2 --------- 80pcs
14-12AWG(2.5-4MM²)--------- BN3.5 -------- 30pcs
12-10AWG(4-6MM²) ----------- BN5.5 -------- 30pcs
Total Quantity: 220Pcs
Note:
♥ Please check the specific size of the product according to the second picture. Due to manual measurement, there may be errors, please don't mind.
♥ If you have any questions, please feel free to contact us and we will try our best to help you.
Gmaudet elec
Reviewed in France on April 28, 2025
Pas ouf
Retired shop teacher
Reviewed in the United States on April 14, 2025
The metal isn't super heavy but they seem to be adequate. Easier to confirm a complete crimp than the insulated splices. I shrink tube them after installation; takes up less room than insulated splices. You can also solder them for extra security, which you can't do with the insulated splices.
Mark Johnson
Reviewed in the United States on April 11, 2025
I bought this splice kit and really like it. As long as you have shrink tubing to put over the connector when you make your splice. Just need a good crimping tool and to make a good crimp.
Amos
Reviewed in the United States on February 16, 2024
These work great for automotive repair. I have used many of these and never an issue. They are not the split type so you can crimp as tight as you want and they won’t fall apart
Henry
Reviewed in Germany on January 9, 2024
Sehr praktische Sache!
tranphys
Reviewed in Australia on August 5, 2023
The kit not as large as in the photo.
SM
Reviewed in Italy on August 31, 2023
Come da descrizione - testati, ne sono rimasto soddisfatto
David
Reviewed in the United States on January 16, 2023
I found myself cutting up insulated connectors for the metal tube inside. Went on here and sure enough they make uninsulated butt connectors. Combine these with those hot glue heat shrinks, and you have a perfect connection I'd almost compare to a solder joint. These are not thin cheap things, they crimp and hold.
Lisa
Reviewed in the United States on April 8, 2023
So much better than the insulated ones. I like to use the marine shrink wrap so these are nice and narrow, allowing me to slide the wrap over them and not increase the diameter of the wiring too much
Eric
Reviewed in Canada on September 27, 2022
Incredible value considering box stores like Canadiantire in my country will charge 1 dollar a crimp.They are thinner, but I think that just makes them easier to crimp on automotive AWG sizes and get a bite down the wire with a non-insulated part of a crimp tool such as the Channellock 909. They do appear to be real copper electroplated in tin, I cut one in half to verify. The criticism about the thinness of these maybe might have to do with the thicker AWG crimps. I have no need for the thicker AWG crimps that come with this and can’t verify their use.
Jerry Birge
Reviewed in the United States on February 13, 2022
These are thin connectors they don’t hold the wire correctly even with pro crimp tool. Order the ones advertised as thicker copper.
OmniDan
Reviewed in the United States on June 25, 2019
These ferrules arrived quickly! Thumbs up Amazon.I did not double check the sizes vs the measurements. That I guess, is my fault.I was repairing a vacuum cleaner with a replacement power switch. I used the smallest connector BN1.25 "22-16 AWG" to connect 2 16AWG wires. I used the corresponding location on a quality pair of Stripper / Crimpers for Non-Insulated. The wires just fell out. I ended up re-stripping the wires, soldering them, crimping, soldering, then covered with heat shrink. It worked.Then I sat down with a veneer caliper and measured the I.D. of each size. The listed metric size was close to exactly the same once I converted. I then looked up Amer Wire Guage (AWG) standards for Copper wire. Here are the results.BN1.25 Stated 22-16AWG, actual 11AWG! Each side would hold either 10 of 22ga or 3 of 16ga wires.BN2 Stated 16-14AWG, actual 9AWG! Each side would hold either 5 of 16ga or 3 of 14ga wires.BN3.5 Stated 14-12AWG, actual 7AWG! Each side would hold either 5 of 14ga or 3 of 12ga wires.BN5.5 Stated 12-10AWG, actual 6AWG! Each side would hold either 4 of 12ga or 2 almost 3 of 10ga wires.So these do not work for intended purpose but may work as Molex crimps since the walls are quite thin.I will try that later and post. Until then I plan to order Ginsco 200pcs, UPC 610731355937 which only $1 more.
MerleR.
Reviewed in the United States on October 8, 2019
I used these to extend some short length ground wires on various circuits, when converting a service entry load center to a sub panel, where I had to add a separate ground bar on the opposite side of the panel. I used a hydraulic hand held crimping tool to compress these connectors onto the wire. This worked perfectly. With heat shrink tubing, these would work equally as well as butt connectors on insulated wire. Nice selection of sizes and quantities.
Recommended Products
