Your cart is empty.
Your cart is empty.Product Description
pigtone 9 volt adapter is suitable for any desired negative tip 9V pedal, to minimize or eliminate the need to replace the battery carrying.Use a fireproof material shell, this is just a protection, please be careful of fire.
You can run 5 pedals on the pedal board at the same time. You won't have a noise problem.
You can use different effect groups conveniently.
Have fun enjoying music!
Ripple diagram explanation
The influence of the current signal on the simulation effect: the audio image of the current signal is obtained by the ripple tester. The value is expressed in MV (millivolt). The ripple value of most adapters is 450 MV, and the image fluctuates greatly. When electrical signals are amplified hundreds of times by sound, noise will be generated. Therefore, the smaller the ripple (MV) value, the smaller the noise. What we do is a professional guitar pedal adapter, so its ripple is below 30MV. So you don’t have to worry about noise.
The newly upgraded noise reduction circuit board of 2021 adopts dual noise filter element design to ensure a quiet environment when you are playing music.
The magnetic ring can reduce noise and dust. Professional noise isolation performance make sure you have a quiet pedal chain status while playing. Absolutely no sound / signal loss.
1 x pigtone 9V Power Adapter
1 x 5 way Daisy Chain
Rebecca L.
Reviewed in the United States on February 19, 2024
The product is good, works well, with one exception. The 3.5mm plug extension does not work with vintage RAT pedals. This has nothing to do with the power output or polarity, those are correct. The plug itself is the issue. It’s slightly thinner than other 3.5mm plugs. Plugged into the RAT it doesn’t convey the juice to the pedal. Other 3.5mm plugs do work with my RAT,, but not this one.
MWY
Reviewed in the United States on August 31, 2023
Works exactly as it supposed to nothing fancy, but gets the job done.
Joaquin
Reviewed in Mexico on July 21, 2023
Buen producto, no mete ruidos
Chris L. Fuggerhardt
Reviewed in the United States on March 21, 2023
Enough to power 5 pedals. Just FYI my zoom g3 pedal did not work with this but all my 4 others did.
Daddy-R
Reviewed in the United States on February 11, 2023
I only power 2 devices from it and it works well at a cost much lower than individual wall warts. Only complaint is the cables are a bit of a chore to store but all are that way - still better than 5 individual wall warts as a much lower price. he cables are long enough to reach the devices.
CFH/TEXAS
Reviewed in the United States on April 5, 2023
I love this product, it fits all of my pedals. Great product!
Ryan
Reviewed in the United States on April 4, 2023
This works well enough, honestly. I'd probably buy another one.
Mitchell M.
Reviewed in the United States on June 22, 2022
I got this unit to power pedals for my practice amp, and it works perfectly.I chose this because of the 1amp/1000mA power rating and output because some of the pedals in my collection are really power hungry - especially my old 1st edition ProCo RAT (it requires a separate polarity switching 9v adapter cable). The same goes for the MojoMojo and Pipeline pedals pictured below. They need more milliamps than most.Anyway, this one from Pigtone works great.There's plenty of length on the main power cord module, and plenty of length between the five adapters.The connections are all solid, and even with the full five pedals pictured with a clean setting on my amp, there was almost no noise from the power unit.I'm very pleased with this, and it's a solid value.I have a similar/larger nine-unit daisy-chain TrueTone OneSpot that I love, but it's only half the power rating at 500mA. It serves me well, but when I add in some really hungry pedals, I do notice some noise.This one's a winner.
Customer
Reviewed in the United States on November 10, 2022
If you play guitar you know pedals and cords can make a real messThis is very convenient and easy to use store and clean up
Recommended Products