Your cart is empty.
Your cart is empty.Ergonomic Bike Grips with Anti-Slip Dot Design | Shock-Absorbing Rubber Handlebar Grips for Mountain Bikes | 130mm Locking MTB Grips
Gustavo
Reviewed in Germany on March 31, 2025
Ich habe die ergonomischen Fahrradgriffe mit Anti-Rutsch-Punktdesign problemlos installiert. Die alten Griffe waren etwas schwieriger zu entfernen, aber es hat sich auf jeden Fall gelohnt. Die neuen Griffe sind sehr bequem, liegen gut in der Hand und sehen sogar edel aus. Sie bieten auch guten Halt, besonders beim Mountainbiken.✅ Positiv:✔ Einfache Installation✔ Bequem und rutschfest✔ Edles DesignKlare Empfehlung – 5 Sterne!
Shoe
Reviewed in the United States on March 30, 2025
Good grips. No issues and none expected after installation. Our family has a fleet of mountain bikes so we are no stranger to bicycle maintenance (mixture of 3 Specialized Stumpys, 2 Treks, 1 Cannondale and others). i.e. We don't need to pay a "bike mechanic" to bleed hydraulic brakes or really anything else on a bicycle. After all bicycles are not rocket science; this technology has existed more than 200 years now so working on one is really not difficult as long as you're willing to get your fingers dirty.We hope this information is helpful in your decision. Cheers ! !
RaceNJason
Reviewed in the United States on March 13, 2025
I say 'so far so good' because these are the first grips I've ever got that mounted via clamps. All my life I'm use to pulling off the old grips, lubricating the new grips and putting them on and positioning them fast before the lubrication starts to dry. Then hope the next morning you got the position right otherwise start over. Point is once those were on, they were usually on. I've heard various stories of grips like these eventually loosening up after time (or up front). Well so far I can say these are not moving. My first tighten level I did was not enough. The grips did move when pressure was applied. So I tightened them more actually worried I might strip something out (or worse snap the bolt). Neither happened. I suppose it would've been nice to have a 'torque' setting that was recommended by the manufacturer (sorry if I missed this somewhere) that way I would know I wasn't going to damage anything and that it would hold. Anyway...I'm not sure I could tighten them anymore, but at this point they are not moving anymore.As you can see I'm a little nervous about this type of grip. It's actually my first upgrade on my new eBike. It was nice that the original grips came right off (they also used this clamp system) and the new grips went right on. I realized at that moment that if I carry around the Allen wrench for a while, I could easily adjust my grips if I felt they were not in the right place. This was not possible before so a 100% benefit. I suppose the bike industry has figured all this out since it seems I see this type of grip (the clamp style) more and more these days.I would definitely recommend these. 40 years ago there was a grip called Oakley's. I'm pretty sure they were the first manufacturer of the ergonomic grip. I used them on my BMX bike and wouldn't use anything else. After a day of riding you could absolutely tell the difference. So that means I'm recommending these grips because of their ergonomic design as well as the clamp system that makes it easy to put on and easy to adjust. As long as the clamp doesn't cause it to slip...this is a definite win all around. IF these start to slip and no amount of tightening fixes it, I will revisit this recommendation and adjust it accordingly. Until then...it's so far so good.
merklm
Reviewed in the United States on March 13, 2025
First of all, I was leery of taking off the original grips. They were on there really tightly! But good ole YouTube suggested that compressed air was the move, so I said, what the heck, I'll give it a go. And it worked a charm! Popped the old ones off and had these new ones on in about five minutes. Air compressor FTW! I probably spent most of that time testing to see what angle would suit me the best. I was also concerned that these would twist under pressure, but so far so good. I don't ride trails and putting all my bodyweight on them didn't budge them, so hopefully they're good. I just tightened them as much as possible with the little allen wrench they included and, yeah, I think that'll do the trick. The hand position isn't too different from the oem straight ones, but I think it does feel a little better and should help a bit with fatigue over longer rides. So yeah, a pretty cool fun upgrade.
Zorro
Reviewed in Germany on April 9, 2025
Super griffe und sehen schön aus !
Dave Maverick
Reviewed in the United States on April 3, 2025
I was finding my hands getting sore and uncomfortable on longer trail rides requiring tight grip and a lot of maneuvering when using standard grips. I was thinking I simply needed fatter grips, but when I came across this set I figured I'd take a chance on a less conventional design. I've now had them on my bike for a couple of weeks now and have logged probably around 50 or 60 miles of riding, and I haven't had any pain or discomfort in my carpals since installing these! So from that experience these do seem to fit the bill of "ergonomic" for whatever that's worth. They're also just very natural to hold generally, much more comfortable than standard round skinny grips, and there's no sacrifice in control either which is obviously an important consideration. If you're in a similar situation as I was, I think these are definitely worth a try.
HaGi
Reviewed in Germany on April 28, 2025
Ich bin wirklich begeistert von diesen Griffen! Sie passen hervorragend auf einen handelsüblichen Fahrradlenker und fühlen sich beim Fahren richtig gut an – die ergonomische Form entlastet die Handgelenke spürbar, selbst auf längeren Touren. Die Griffigkeit ist top, auch bei Nässe rutscht nichts.Die Montage war unkompliziert und ging zügig – allerdings musste ich Klingel, Schaltung und den Bremshebel etwas versetzen, da diese Griffe etwas länger sind als meine alten. Das war aber kein großes Problem, man benötigt lediglich zusätzlich zwei unterschiedliche Innensechskantschlüssel und einen Schraubendreher. Wer ein bisschen Werkzeug zur Hand hat, kriegt das locker hin.Insgesamt ein super Produkt, das sich absolut gelohnt hat!
Iceracer
Reviewed in Germany on April 28, 2025
Die ergonomischen Fahrradgriffe liegen sehr gut in der Hand und bieten durch das Anti-Rutsch-Design auch bei längeren Touren einen sicheren Griff. Die stoßdämpfende Gummibeschichtung sorgt für spürbaren Komfort, besonders auf unebenen Wegen. Einfache Montage und gute Passform – eine tolle Aufwertung für jedes Mountainbike!
Leonard Powell
Reviewed in the United States on April 21, 2025
My hands used to get numb on long rides. These grips spread the load out, and I can go a bit longer now. Well worth the upgrade price and minimal effort.
Chris R. Ginsburg
Reviewed in the United States on April 13, 2025
I got these ergo-wing style grips for my commuter electric scooter. They look good overall, nice quality and design. They are light weight. They're dual-side locking grips and seem to stay in place very well. The wing shape is a palm rest and comfortable for long commutes... All of my grips are ergo/wing shaped.. once you try that you never go back!. My other grips have softer rubber however. Not that this grip is uncomfortable, but I'm just used to the softer rubber variety. These are very firm and are for people that don't want squishy grips. And if you like it firm, these are nice and the price is fantastic.
Anne M. Weisbeck
Reviewed in the United States on April 13, 2025
I have issues with hand numbness when riding my mountain bike, likely due to my wrist, bending backwards farther than ideal. I actually purchased three different versions of the ergonomic grip from this company (for three different bikes (N+ 1 IYKYK)), and they have definitely made a difference. Easy to install and a good value.
DanielTry
Reviewed in Germany on April 10, 2025
Qualität und Haltbarkeit sind sehr gut.Ich habe diese Griffe zum testen angefordert, um ein paar alte Griffe an einem Fahrrad zu ersetzen. Was mit allerdings im Nachhinein auffiel....Ich hätte die Länge der Originalgriffe messen sollen. Den 93mm ist noch das kleinste Maß, was es gibt. Die Griffe an meinem Jugend-Testrad sind nochmal ein ganzes Stück kürzer.Auch sollte man vor dem Kauf darauf achten, dass sich neben der Grip-Shift Schaltung kein schmaler Plastikring befindet. Dadurch kann man die Griffe nicht zu 100% an die Schaltung heranschieben. Es bleibt immer ein kleiner Spalt, welchen man bei reinen Gummigriffen ohne Feststellring womöglich nicht hat. Es fällt kaum auf, aber sollte erwähnt sein.Die Griffe selbst haben einen guten Grip und fühlen sich wertig an. Und aufgrund von 2 Verschraubungen halten die Griffe auch superfest am Lenker. Hier gibt es absolut nichts auszusetzen
Recommended Products
