Your cart is empty.
Your cart is empty.Product Description
This Riding Sport Handlebar kit , Specially customized for Kawasaki Ninja 250/300 2008-2018 ,Ergonomic design minimizes fatigue and discomfort by creating the optimal riding position. set at a 5 degree down angle create a more aggressive riding position.Each clip-on clamp is CNC machined to ensure maximum weight savings without sacrificing strength.
Height adjustable,Better riding position than original. Clip-ons set at a 5 degree downward angle,Height adjustment range 25MM or 35MM ,You can raise, or lower, your forks, as much (safely) needed, and these bars are not affected,different height creating the best optimal riding position for you .
Feature:
- Clip ons：37mm CNC-machined clamps
- Bars diameter:approx 22mm(7/8")
- Bars Length: 300mm（12"）
- Height adjustment range 25MM or 35MM
- Lighter weight than original.Made of high quality aluminum alloy with anodizing treatment,durable for long time using.Handlebar opening angle adjustable. it can be set within the range of 65mm.
Easy installation install with using stock bolting area bolt hole ,without having to raise your fork tubes up higher, to clamp onto. or remove the top triple tree clamp or disassemble your entire front end.
Perfect match with Kawasaki Ninja 250R 2008-2012,Ninja 250/300/EX300 2013-2018
- Bar Ends+Fork Adjusters+Yoke Nut Set, better than original.
- 37mm Fork Cap Spring Preload Adjuster.
- Made by CNC machine with Metallic surface, anodizing treatment.
- All bolts are 304 stainless steel ,looks beautiful and durable than original levers.
Fitment:
Fits for Kawasaki Ninja 250 2013-2018
Fits for Kawasaki Ninja 300 2013-2018
Fits for Kawasaki Ninja EX300 2013-2018
Fits for Kawasaki Ninja 250R 2008-2012
- Condition: Brand New aftermarket item,never used or installed.
- Material: 7075-T6 Aluminum,CNC Machined with anodizing suface treatment.
Package:
Item Includes:
1x Steering Stem Top Yoke Nut
2x Handlebar Bar End
2x Handlebar Clip ons
2x 37mm Fork Cap Spring Preload Adjuster
- package size: 35*13*6cm
- package weight:1.65 KG
- No instructions included.Professional installation is highly recommended！
Notice:
1.Before Purching, please confirm the product fits your motorcycle model.
2.After installation, please be sure all screws are tightened properly.And if necessary, use a thread lock.
Alexis
Reviewed in France on March 25, 2025
De très bonne qualité et va comme un gants sur ma petite ninja
Sam
Reviewed in the United States on October 8, 2024
Couldnt figure out how to install the fork covers but everything else works great and looks good
bud1285k3
Reviewed in the United States on April 9, 2024
I was worried about the fit of the controls after reading other reviews, but the bars i received where accurately machined barstock aluminum requiring no modification
Michael Bowden
Reviewed in the United States on July 6, 2021
Easy installation. Look great on the bike. Makes my stance more crouched and tighter and tucked in to the cockpit of the bike.Good quality for the money.
Gabriel
Reviewed in the United States on June 13, 2021
Quedó muy bien. Y se siente mucho mejor la conducción de la moto.Recomiendo roralmenteSólo tube que llevar la al mecánico para que instalara las perlas para ajustar la suspensión
しば
Reviewed in Japan on May 19, 2021
左スイッチボックスの固定穴の位置が若干中央側にズレており、ボックスに着けるとグリップが5ミリ足りなくなる上に、クラッチセンサーのカプラーと干渉する。穴を開け直すか突起を飛ばしてフリーにしてから固定し直す等加工が必要。バーエンドのネジは径の細い物（m6かな）が使われており、純正は付かない。好みのバーエンドをつけたい場合は加工が必要。パーツカラーは緑のみ。イニシャルアジャスターはハンドルバーに干渉してスクリューが回せないので飾りにしかつかえない。若干のフォークオイル漏れがあったため純正にもどし、トップカバーを付けた。耐久性は付けてみたばかりなのでわからないが、重量もありしっかりしている印象。振動も純正とあまり変わらないかな？これだけのパーツがセットになっていて、ペンスケの半額であることを考えればお得なのでは？
Terry Bartholomai
Reviewed in Australia on March 15, 2021
Couple niggly points. The mount does not sit flat on the top of the triple clamp, as the triple clamp is not flat. Only out by a millimeter.The mounting bolts hold it in position well. The bars themselves are not quite the same diameter as the stock bars, so the switch blocks on both sides as well as the clutch mount needs a wrap of insulation tape to enable them to be done up tight.The new position of the bars does put you in a bit of a lean forward pose, but I find it comfortable.Over all, very happy.
marcus scarsella
Reviewed in the United States on December 3, 2021
This has been mentioned before. The bars are great looking and mount to the ninja 250 really easily. The problems start when you are putting on your controls and levers. The bars are thinner than the stock ones. You will need to add shims, tape, or whatever to get everything tight so they don't move. Nothing is worse than pushing a button and having the whole control box slide out of place. The only control that tightened up without any spacer was the brake lever. Everything else didn't even come close to it. I used a single layer of an aluminum can for the clutch lever and 3 layers of bicycle tire for each of the control boxes. Even with drilling the holes for the peg on the control boxes left them to jiggle around. A little bit of a pain in the butt.
Sunshine
Reviewed in the United States on January 14, 2021
Ordered these after seeing the pictures posted here, put them on my bike today and I gotta say the adjustability of these is actually pretty nice and more than I was honestly expecting.On the topic of bar thickness, yes you're going to need about one wrap around with electrical tape to keep your throttle from shifting or your clutch/break from also shifting.Other than that great bars, currently waiting on new grips to come in then will post pictures
alvaro
Reviewed in the United States on July 15, 2020
Very happy. No complaints. And 50$?! I think I’m gonna buy another set in case I drop it in the future.I usually don’t write reviews. I’m gonna post a pic along with this one.I put this on a Kawasaki 250
Jacob
Reviewed in the United States on November 8, 2020
Work as they are intended on my njnja 300. You will have to drill some holes for the controls of the bike and may want to use some tape to increase the thickness so they don't move as much. I've used them the last few days and they are doing just fine. Definitely worth the money for the amount of adjustment they allow.
Recommended Products
$104.99
$ 44 .99 $44.99