Your cart is empty.
Your cart is empty.Product Description
Hedume 4 Pack Tire Changer
Designed for use with make of tire changer.
Once installed will stay in place while mounting the tire, and you can adjust it with hands by little efforts.
Helps mounting and demounting tires especially done well with low profile side walls and run flats.
With a simple and handy design, this tire changer bead clamp fits most rims.
Excellent Plastic Material
This bead clamp is made high grade nylon and plastic composite material, durable and will not scratch or damage wheels. Its a huge time saver and can prevent tire bead and wheel damage from over stress.
Great Tire Changer Tool
This tool pushes the bead down into the center of the wheel which helps mounting and demounting tires.
Spring Loaded Plunger
The plunger on this tool is spring loaded so once installed will stay in place while mounting the tire, and you can adjust it with hands by little efforts.
Applications
This Tire Changer can be used when replacing various types of tires. Especially when incorporating a flat tire. If you put it in the rim part of the wheel, could form a tire smoothly.
Customer
Reviewed in the United States on May 25, 2025
Absolutely need these if you are installing low profile tires. Easy to use and function as expected
kbuyer
Reviewed in the United States on March 28, 2025
Especially if you're working by yourself changing atv or sxs tires
Big Ayd
Reviewed in the United Kingdom on February 15, 2025
Struggled big time with low profile, stiff sidewall tyres until I got these. Simple to use, positive locking and do the job at an excellent price.
Mouseman
Reviewed in the United States on January 2, 2025
I bought these to help installing a rear tire on my lawn tractor wheel. These are way too big for that application, they flop around like a fish out of water. Since the description doesn't bother to mention that detail I thought I would give everyone a heads up.
John K.
Reviewed in the United States on January 15, 2025
The clamps will give you extra hands during a manual tire mounting process. Whether you are working with tire irons or spoons or a manual tire changer, you need them to keep some part of the tire in place while trying to press another section of the tire to go in. A must-have for a one-man tire replacement job with basic hand tools, i.e. irons/spoons. And if you need to change low-profile tires, you can't do it without a few helping hands like these. It will also be helpful even if you have duck head equipment.
Neal Vanderstelt
Reviewed in the United States on April 7, 2025
Originally gave a negative review.. I will state that it really isn't my fault because people make it sound so simple without providing detailed information.. There should be better videos on Youtube, etc.. on this product and how to do this on various sized rims.. Perhaps I'll make a video myself.. Understand this is not easy if you have no experience and guys that make videos do it differently while using different techniques and tools.. It's not too difficult if you do it correctly,..Positioning of the tool has to be correct.. You have to put this on and go in one direction for it to work properly at least on the Toyota Prius and have a proper bar or other mechanism to work around the rim... You want to put this on the opposite side of the valve stem you are working on or it might pop off before you are finished.. It's gets harder as you get closer to sealing the rim.. If you don't use a little soap and water around the edges it will be near impossible.To my surprise my low power air compressor sealed the bead when airing it up after about 10 psi it popped..Old review:I tried this with Toyota Prius rims.. It was very difficult to put them on and also move around, everything was by force.. The product details state otherwise.. I would love to be wrong so feel free to make a video and correct me.. Yes I had them the right way and it was not easy at all.. I was not able to get the tire on and seeking better tools to do the job.. Waste of time and money so I'm leaving 1 star..
Elghali
Reviewed in Canada on April 18, 2025
Very good an helpful
Jeff Higgins
Reviewed in Canada on April 12, 2025
Good quality and work really well to hold the tire in the drop centre
Slipslow
Reviewed in the United States on February 24, 2024
I used these to mount a set of low profile 20 inch tires on a set of rims. For the most part they did their job. A couple of times they popped out. No big deal though. Probably saved me $100 so I'm happy. Definitely recommend for the do-it-yourself guy or gal.
Éric
Reviewed in Canada on December 26, 2024
Work great for my manual tire changing tool. A must have to keep the bead in the drop center. Yes vice grips work but these won’t damage rims & quick and easy to use.
Alex
Reviewed in the United Kingdom on December 11, 2024
Does the trick, easy to use. Can't comment of longevity.
Todd R
Reviewed in the United States on October 19, 2024
They come in handy with my lawn tractor and ATV tires but were pretty much useless for motorcycles, just to big. Overall a nice product just not for all applications.
Wayne T.
Reviewed in the United States on November 12, 2023
To be honest, I wasn't really sure how to use these things. It took a little bit of time to figure out, as they don't arrive with any instructions. What I can say is that it would have been impossible (for me at least) to finish mounting the tire. Getting the first bead on the rim is relatively easy, but the last bead is virtually impossible with a tight tire. If you're having trouble as you're trying to get the last 8 to 12 inched of the tire under the rim, and one end of the tire keeps slipping out while you're working on the opposite side, then these clamps will save your sanity. Just use them to lock in your progress, and you can keep whittling your way towards getting the entire tire slipped under the rim. Having four is nice, because you can leapfrog one on each side as you're getting closer and closer to getting done. Lifesaver.
Recommended Products
$23.99
$ 11 .99 $11.99