Your cart is empty.
Your cart is empty.Product Description
A Set Screw is a type of screw generally used to secure an object within or against another object. Set screws are most often headless, meaning that the screw is fully threaded and has no head projecting past the major diameter of the screw thread. The set screw passes through a threaded hole in the outer object and is tightened against the inner object to prevent it from moving relative to the outer object.
From the Manufacturer
A Set Screw is a type of screw generally used to secure an object within or against another object. Set screws are most often headless, meaning that the screw is fully threaded and has no head projecting past the major diameter of the screw thread. The set screw passes through a threaded hole in the outer object and is tightened against the inner object to prevent it from moving relative to the outer object.
Goose Slayer
Reviewed in the United States on May 12, 2025
proper size and well made
SanibelBeachNut
Reviewed in the United States on January 30, 2022
Arrived on time. Found that they are not barrel but conical in shape, not flat based but crudely pointed. Not to any spec, total junk. Amazon took care of the refund, the box went in the trash.
Garander
Reviewed in the United States on March 20, 2021
Its very hard to find 6/32 x 1/8 plug screws .My 1911 slide has been drilled for a Clark rail with a ultradot on it .Its my bullseye centerfire gun . I had the front of the rail notched for the front sight , so i can reinstall theRear irons , and use the gun on plates during the off season . The Hillman screws with a dab of locktite .Fill the holes quite well when i remove the rail , just got to stop screwing at flush . The allen cap and threads iare cut well . The choices are limited , this does the job .
Borin
Reviewed in the United States on April 6, 2021
Fits good, please send in sealed container, the oversized box had too many gaps that it was a mess in the envelope.
B. Hemphill
Reviewed in the United States on December 4, 2020
These #6-32 x 1/8" long set screws (a) screw into a #6-32 tapped hole and (b) hold stuff securely in place when screwed in far enough to make contact with the mating part. And one bag will allow you to do this twenty (20) times (or, in our case, 19 times when one of the little buggers falls to the floor and rolls under the leg of a massive table in the machine shop).
Sweet Daddy
Reviewed in the United States on December 24, 2019
I used these set screws to secure the spring in my AR. Some Lowers require 4-40 threads, but mine used these. I used a little blue loc-tight to keep the threads from corroding .
Jacob F.
Reviewed in the United States on October 11, 2019
Didn't strip out or round my allen key. Cranked on it pretty hard too. It's holding my compensator on my race glock. Also I think it came to me open and spilling out when I opened it the rest of the way. That being said it came with more than advertised.
Chris
Reviewed in the United States on November 7, 2017
Nicely machined set screws
Recommended Products
