Your cart is empty.
Your cart is empty.Please review all product information to ensure that this product is compatible with your unit. Our staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us...we get it. Let's work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: ▪ Model and/or Sub-model ▪ Spec and/or Type Number ▪ Code and/or Serial Number ▪ Year ▪ Engine Horsepower. Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.
kevin morgan
Reviewed in the United States on April 7, 2025
Worked great direct fit too
JohnM
Reviewed in the United States on March 23, 2024
Bought this pump to replace the leaking/cracked pump on our pressure washer. Easy installation and good upgrade from the original pump.
KENNETH WYMAN
Reviewed in the United States on July 18, 2023
You will need {2} 5/16 x 3.5 inch bolts and a {1} 5/16 x 4 inch bolt. On each bolt I used {3} 5/16 washers held together with electric tape to make installation easier. Installed {3} 5/16 steel nylon locking nuts. Adjust for oil drain gap with washers if you need to add/minus. 3/16 Keyway or square key. Brought my power washer back to life. A little cumbersome but did it. Works Great!!
Wil Hamilton
Reviewed in the United States on May 18, 2023
ExcellModel: EXVRB2321So far the pump tested ok. The only problem was that it was not a direct fit replacement. It would not seat all the way as it hitting on the housing. You will need to buy longer bolts, and a keyway as the one in my model was built into the old hardware that isn’t compatible. You will also need to buy washers to use as spacers if you have the same model as I do due to the pump not being able to sit flush. We will see how it holds up moving forward.
Benjamin Slominski
Reviewed in the United States on August 5, 2021
It was a direct replacement for the old style wobble pump. However the pump did not come with the metal plug thingy as shown in the product pictures, it came with a cheapy plastic plug. In addition, the pump gets EXTREMELY hot (water vaporizes when dripped on it, for example). Something does not seem right.
Larry kapell
Reviewed in the United States on July 7, 2021
Bolted right in place I purchased longer bolts and washers to use as spacers and it worked perfectly first time I ran for 4 hours straight pump ran great much more psi than original pump great pump as described I would recommend to anyone
william clotfelter
Reviewed in the United States on July 31, 2020
Fit perfect; had to purchase a new 3/16" ×1" keyway (95 cents at hardware store), old one was stuck in the old pump. Also had to buy 1 inch loner bolts. There are 2 short bolts and a long bolt; the long bolt can go where one of the short bolt was, so you only have to buy 2 bolts really. Really is DIY. Oh and ROP Shop has great customer service; 1st pump came damaged in shipping, so they sent out a new one, it arrived in just a few days!! Just used it for 2 hours and it works great!!
Customer
Reviewed in the United States on August 27, 2019
I really liked how it was easy to install and there was no adjustment needed on the pump. I did not like that there was no drain plug for changing pump oil .
Recommended Products
$160.99
$ 77 .99 $77.99
$84.99
$ 38 .99 $38.99