Your cart is empty.
Your cart is empty. Attention Pls:This is OEM Replacement of Part#3655X 3655P 3655L 3655G 3655R 3655T 3655A,Produced by HobbyPark,Check your specific model's manual for compatibility,or Contact us
The color of the item may vary slightly due to photography and your own computer;There's some little error from human measuring.
Customer Satisfaction Guarantee
If you are not completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!
Item: Aluminum Suspension Arms
Package Include:
4x Aluminum Suspension Arms (L/R);
4x Short Screw Pins;
4x Long Pins
4x M3 Screws
Features:
Come with Screw pins (the short),Easy to install,the perfect to replace original A-Arms,Highly Recommend
Anodized,CNC machined for precisionIncreased strength and precision.Easy upgrade from the original part;
Compatible with:
Traxxas 1/10 Slash 4X4
1/10 Slash 4x4 VXL Ultimate Platinum
1/10 Stampede 4x4
1/10 Stampede 4X4 VXL
1/10 Rustler 4x4
1/10 Rustler 4x4 VXL
1/10 Hoss 4X4 VXL1/10
XO-1
Note:Check your specific model's manual for compatibility,or Contact us.
Ashley McCurry
Reviewed in the United States on March 15, 2023
These worked great on my sons car. My husband questioned me purchasing them here but I figured it was worth a try. They’ve held up fantastic.
Tyler Newman
Reviewed in the United States on October 13, 2022
Easy to install, looked awesome, BUT THEN I took my rustler out and the front left one bent so bad that it broke my turnbuckle. Will be ordering RPM arms instead I guess
Zeb
Reviewed in the United States on August 15, 2020
I bought these for my rustler 4x4 and they fit perfect and look awesome! The supplied hardware worked fine for my application and I've had zero problems with them, for the price and quality it's hard to beat them.
Violina
Reviewed in Canada on July 5, 2020
I have installed them, work perfect.
Sheldon
Reviewed in Canada on May 28, 2020
Garbage says for the traxxas rally does not work not even same size.. thanks guys
Paul S
Reviewed in the United States on January 6, 2020
Good product - a little bit pricey.
TruckerJim
Reviewed in Canada on November 23, 2019
Looks good
Jordan
Reviewed in the United States on October 8, 2019
I've been in the rc hobby for 20+ years. I bought this set to replace a worn set of arms from intengy. The intengy set lasted me 8 years before having any issues. No bending, breaks, and stayed solid. However, they were worn and lost tolerances which is to be expected after at least 300 runs on them. Buying these arms I expected simular expectations, but this wasn't the case. Only after a few runs on these arms, the metal is soft and will bend just going over bumps at a Decent speed. I take care of my rc cars and don't run them hard or jump them. On occasions it will flip over. I strongly recommend that anyone who bashes, jumps, or speed runs should not purchase these arms. I have since stopped using my traxxas as these arms bent and ate up some expensive tires that I just recently purchased as well. You get what you pay for. I also noticed with these arms, they tend to be slightly shorter than my original intengy set and caused stability issues.
Sean
Reviewed in the United States on August 23, 2018
I was worried about this set fitting my stampede 4x4 vxl but they worked greatI did have to use my stock pinsThe included pins were too short. Maybe for another model..? Either way the arms matched the stock ones perfectly so no issues aside from using the stock pinsRecommended
Dustin
Reviewed in Canada on June 4, 2018
Fit great on my Slash 4x4. I did not use the included rods and e clips. The treaded rods that come stock on your Slash 4x4 fit really well. Not a knock against the product as I don't know how you could avoid it but, after one session in some gravel, the bottoms of these arms are slightly crewed up. No avoiding that with the amount of dirt and rocks these truck throw up though!
UsaRubber
Reviewed in the United States on March 30, 2018
Bought these for my slash 4x4 despite everyone saying bad fitment with the hub carriers because of the pins provided use a C clip instead of screwing in. Well I'm here to say -STOCK PINS SCREW IN!!! They do! The threading on the A arms is finer, but the stock pins do screw in, I even unscrewed and screwed them back in to make sure I didn't strip out all the splines and it did not. I put them back in with lock tight. The pins provided are too thin and allow the carriers to wobble. The STOCK TRAXXAS pins Eliminate it. I'm very very very pleased this ended up working because it turned this from a 3 star to a 5.On the Rear where the A Arms mount to the chassis I had to use washers to add a little space because of all the play it had. On the front I did not, although there is play, adding a washer created too much rub and didn't let the A arms freely move up and down.On the rears my MIP axles rub the last joint on the A ARMs. I have decided to cut out that join and hope for the best.5/5 Great product, super cheap, fast shipping! And the STOCK PINS FIT!
R. Ricardo
Reviewed in the United States on April 23, 2018
Got these because they seemed like a good value. When I started the installation, I inserted stock pin and felt resistance. Removed pin and noticed the kit came with pins. Saw the e clips and snarled. Got discouraged and almost threw in the towel but I checked out the reviews and saw peopl saying that the original pins did in fact screw in. After comparing threads on pin amd a arm, I reluctantly started screwing pin into a arm. It turns out, it does in fact screw in! Glad I checked the reviews. Good product!EDIT: These were installed on a Stampede 4x4 vxl
Recommended Products
$10.99
$ 5 .99 $5.99