Your cart is empty.
Your cart is empty. Product Specifications:
Overall Height: 6"
Handle Length: 9"
Weight: 2.4 pounds
Stop time: 1-2 Second
Filling speed: 1 L/min
Applicable materials: liquid, viscous liquid,paste (excluding granular substances)
Installation method: G3/4 female thread connection,not NPT thread
Package includes:1 Honey Bottling Valve and 1 roll of raw tape
The honey bottling valve is highly reliable and very fast solution for filling your honey jars. Equipped with anti-drip system with no threads or blind spots inside the valve.
Manual Honey Bottling Valve can fit tanks with G3/4 female thread outlet directly with no adapters.The stainless manual valve can also be used with other outlet sizes, but adapters are required.
Thanks to this stainless steel honey bottling valve, we are able to easily pour the right amount of honey and avoid the risk of spillage.
The speed, accuracy, and smoothness of this valve is unmatched by any other design in the market.
Wide application: The no drip manual valve can be used for any liquid and any viscous liquid. Such as honey, tomato paste, essential oil, etc.
If you have any questions, please feel free to contact us, we will try our best to solve it.
Mtnberg
Reviewed in the United States on January 1, 2024
Great alternative to the more expensive bottling valves on the market. The valves are designed to be fully disassembled for cleaning or service. The threads are unfortunately BSP rather than the normal NPT but can be easily adapted.I would suggest to fully disassemble the valve prior to use for cleaning and inspection, I found that the internal return spring had a sharp burr that would damage the main internal shaft if not smoothed out before use.
Deer slay
Reviewed in the United States on August 15, 2023
appears well made, you may have to find adapter ,as its straight 3/4 in female parallel "G" -BSP....brittish standard pipe thread, not npt ,,...will update as i test it out,after locating a propper thread bulkhead fitting to attatch....if all goes well should help filling honey bottles..*update it can thread onto 3/4 npt with Teflon tape ,I suggest only on thick sturdy walled tanks,thin wall may flex to much when torque applied using the lever,some welded bung ports are 1.5 "npt ,so a adapter reducer bushing will be needed,some tanks are 1"npt,use your best judgment , needs to be a sturdy tank,
Recommended Products
