Your cart is empty.
Your cart is empty.Package of (3) belts. Replaces Hoover part numbers 38528-027, 38528-040 and 40201190. Fits Hoover Elite, EmPower, Fold Away, Fusion, Spirit, Sprint, Hoover Bagless, Caddy Vac, Soft & Light, Soft Guard, Breathe Easy and other select models.
Annie Randall
Reviewed in the United States on February 11, 2025
Added years of service to my Hoover.
Victoria L.
Reviewed in the United States on September 27, 2024
I ordered this set of belts for my 20+ year old Hoover Elite (model # U5063-930, belt # 38528-027) and it worked perfectly BUT I almost trashed the entire vacuum and returned the belts because it didn't work the first time I installed the new belt. Or the second. Then I read the instructions carefully and noticed that, in bold letters, it was noted to make sure that the numbers printed on the belt faced the outside of the machine. Since there were no numbers printed on the belt, I turned it and reinstalled. And it worked!. I don't know what a simple change of which side of the belt faces the right or left side of the machine makes a difference, but it did.
brad
Reviewed in the United States on August 7, 2024
I like that these belts are designed for this machine, and seem to be of the same original manufacturer's quality. Also, these replacement belts are manufactured to a wider specification, promoting a better centering effect on the beater/brush. The installation procedure of the new belt is the same as the original type belt, and isn't complicated due to the wider material. We will purchase these belts again when that becomes necessary.
Customer
Reviewed in the United States on August 24, 2024
Luckily I ordered a pack of three because the first belt we put on immediately snapped as soon as we tried to use the vacuum cleaner. We then put a second one on and that one has held up using it a couple of times so hopefully maybe just one of the three belts we got were slightly defective. Since the second one seems to be working, we haven't tried the third one yet but I'm hanging on to it.
Pierce
Reviewed in the United States on March 25, 2024
This is the exact size of belt that my upright Hoover vacuum calls for. The previous shop I bought the vac from used a belt a size too big, and I didn't realize it, until it stretched to the point the beater-bar would stop on carpet if I had the height setting low enough to really get good suction and brushing of the carpet. These belts are as-labeled, and are the direct replacement part number for my Hoover. I recommend the belts, as I now have 2 extra belts once this one stretches. But, I don't see that happening for quite a long time. The belt was easy to replace on this model of Hoover, and I am very satisfied that the vacuum is now operating at full-suction and factory spec speed of rotation of the beater-bar.
Mark Garrett
Reviewed in the United States on September 9, 2023
I needed a new belt for my Hoover Elite 200 which specifies a 38528-027 which has changed to a 38528-040. The newer belt is noticeably smaller than the one it replaces, but I managed to get it on. I ran the vacuum for a few minutes and so far it is OK. I am concerned that the belt will not last as long as the old one due to the smaller size but only time will tell. I know belts stretch over time but the difference even after that consideration the new belt is smaller. The previous belt was a genuine Hoover belt with the -027 part number and the retail store I had purchased it from closed down during COVID. I had previously not received the belts after 21 days of the shipment date but EZVacuum.com sent another set out. Received the replacement set in 3 days and for that EZVacuum get five stars.
A. K. B.
Reviewed in the United States on October 29, 2023
When my VERY OLD Hoover stopped suctioning I knew it was just the belt. For $7 I thought it was worth a try to fix. When I first received the belts I watch the very few online videos showing how to take apart my vacuum in order to install it. After several hours I almost gave up. At first I thought the belt was too small. BUT somehow I realized there was more parts to open and finally the belt went on. WALLAH - the vacuum works perfectly now and Save a few hundred dollars!
Donna Smith
Reviewed in Canada on April 10, 2023
works with my vaccumm
Steve
Reviewed in Canada on May 31, 2021
Just what the doctor ordered. Hoover Vacuum is back in operation thanks for this belt replacement. Good quality belt that should last a long time.
Michael Hobson
Reviewed in Canada on May 15, 2021
Good fit and arrived quickly
Ian
Reviewed in Canada on February 10, 2021
Perfect. They are as advertised and fit my vacuum. At $5 or so per belt, delivered to my door, I'm in.
RD
Reviewed in the United States on January 17, 2020
No instructions, at first appears to be to short of a belt but it does stretch and fit. I placed it on the brush first then stretched it over the motor drive shaft. Replacement belt for original #38528-027. Was disappointed that it wasn’t an original Hoover belt, time will tell how well they hold up. Original belt lasted a very long time (16+ yrs) so hopefully this 3 pack will work long enough
S T
Reviewed in Canada on January 2, 2019
3 belts that are not the same as pictured, with no part # that matches on them, and to they eye look much too small. But__once I read the need to extreme/stretch the belt, I did it with a struggle and now the Hoover Preferred is working again
Recommended Products
